Exam (elaborations)
CSA W47.1 AND CSA W59 EXAM QUESTIONS (ACTUAL) 2024 QUESTIONS AND ANSWERS
- Course
- Institution
CSA W47.1 AND CSA W59 EXAM QUESTIONS (ACTUAL) 2024 QUESTIONS AND ANSWERS
[Show more]
Content preview
CSA W47.1 AND CSA W59 EXAMQUESTIONS (ACTUAL)
Sufficient base metal and welding shall be added to support the total load if
______are overstressed by dead load alone or are subject to cyclic loading. -
ANSWERS-rivets or bolts
Radiography shall be clean and free from processing defects and shall have a
density of not more than: - ANSWERS-4.0
The maximum one-pass fillet that shall be deposited in the horizontal and
overhead positions using the shielded metal arc process (SMAW) for pre-qualified
joints is: - ANSWERS-8 mm
The minimum fillet weld size for cyclically loaded structures is - ANSWERS-5 mm
The minimum effective throats for flare bevel groove welds is: - ANSWERS-0.25R
When any examination indicates the presence of a planer edge discontinuity
greater than 25 mm in depth, the_______shall refrain from any
immediate remedial work - ANSWERS-erector
, For spot radiographic examination of welds, each spot radiography should
show at least_________of weld length with the weld image centered on the spot.
- ANSWERS-100 mm
All members and welds affected by the work shall be visually inspected in
accordance with: - ANSWERS-the engineer's comprehensive plan
When application of heat is used to curve or straighten a product, the
maximum temperature of heated areas, as measured by approved methods, shall
not exceed ________ for quenched and tempered steels - ANSWERS-590°C
When the base metal temperature is below 0°C, the base metal shall be
preheated to at least ________and this temperature maintained during
welding - ANSWERS-10°C
For G40.21, 700QT steel 42 mm thick, the maximum preheat and interpass
temperature shall not exceed: - ANSWERS-230°C
The hole-type image quality indicator (IQI) designation, film side, required
for ASTM A517M steel plate, 12 mm thick: - ANSWERS-12
Extension bars, run-off plates and backing, shall be of the same material as the
base material, for the welding of steels with a minimum specified tensile
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Teacher101. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
81177 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now