HVAC CONTRACTOR EXAM -Questions with Correct
Answers/ Verified/ 100% Pass
An instrument that measures potential differences between 2 points in an electrical circuit is called?
A. potentiometer
B. thermistor
C. ohmeter
D. voltmeter - ✔️✔️voltmeter
This device uses a thermal sensing bulb at the outlet of the evaporator to sense temperature and
control superheat
A. automatic expansion valve
B. thermostatic expansion valve
C. low side float
D. schraeder valve - ✔️✔️thermostatic expansion valve
when installing a reversing valve on a heat pump, how many brazed joints should be made?
a. 3
b. 5
c. 4
d. 2 - ✔️✔️4
what would not be considered a misuse of a contractors license?
a. advertising under mulitple names
b. employing service technicians to work under their license
c. loaning license to more than one company
d. continue to work on an expired license - ✔️✔️employing service technicians to work under their
license
,what is used to prevent microbiological growth and help "dirty socky syndrome?
a. radiation
b. ultraviolet light
c. electrostatic filters
d. heat rated static filters - ✔️✔️ultraviolet light
a precisely sized drilled hole through which gas flows from the manifold to the burner is known as
what
a. spud
b. drill size
c. orifice
d. dimple - ✔️✔️orifice
rooftop package hvac units utilize economizers for what primary purpose?
a. to exhaust extra indoor air
b. to equalize indoor/outdoor pressures
c. to allow outside air to be used for cooling in mild weather
d. to raise indoor relative humidity - ✔️✔️to allow outside air to be used for cooling in mild
weather
what is the minimum gauge required for a 12" galvanized steel connector used to connect a lows
heat appliance?
a. .019
b. .029
c. .034
d. .2 - ✔️✔️.029
, after cutting pipes they must be reamed for what purpose?
a. to clean pipe threads
b. to smooth the end of the pipe
c. to remove burrs and chips from the inside
d. to help the threading process - ✔️✔️to remove burrs and chips from the inside
in manual d what is the suggested friction (IWC) loss for hand dampers?
a. .01
b. .08
c. .1
d. .03 - ✔️✔️.03
a system with a 120 degree saturation temperature in the condenser with R-22 has a liquid line
temperature of 105 degrees. what does the temperature difference of 15 degrees represent?
a. superheat
b. wet bulb
c. subcooling
d. air temperature difference - ✔️✔️subcooling
when a technician uses a nitrogen cylinder to pressurize a system for leak detection what should be
used for safety
a. hand valve
b. impervious gloves
c. pressure regulator
d. temperature gauge - ✔️✔️pressure regulator
when the azeotropic blend of refrigerant condenses or evaporates at a different temperature, it is
called?
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MikeHarris. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.49. You're not tied to anything after your purchase.