Exam (elaborations)
FDNY P-99 C OF F QUESTIONS AND ANSWERS
- Course
- Institution
FDNY P-99 C OF F QUESTIONS AND ANSWERS
[Show more]
Content preview
FDNY P-99 C OF F QUESTIONS AND ANSWERSWhat is a general requirement of the location of the installation of a boiler? - answer-
Adequate clearance from combustile construction
What temperature must the materials remain under during combustion? - answer- 170
degrees
What is a requirement for the access of the boiler? - answer- Access for operation and
maintenance must not be hazardous
What is required upon installation to operate a boiler? - answer- Inspection and test
resulting in equipment use permit from commissioner
How often should a boiler be inspected? - answer- Once a year
What documentation is required from a certificate holder? - answer- Owners annual
statement
What is required to hydrostatically test upon installation and who should perform these
tests? - answer- Liquid fuel piping and fuel oil storage tanks by the installing contractor
At what pressure should piping be tested? - answer- 1/2 max working pressure but less
than pressure required for storage tank
At what pressure should oil storage tanks be tested? - answer- At 1 1/2x max working
pressure but never < 25 psi
How long should hydrostatic pressure be maintained? - answer- Until all joints and
connections are inspected for leaks and at 30 minutes have passed
Who is responsible for testing gas distribution piping? - answer- Installing contractor
before closing and operation
What is described on instruction cards and where are they located? - answer- Care and
operation of oil burner located near the equipment.
What type of burners require a C of F holder to operate them? - answer- Any boiler that
is not automatic or requires preheating.
What is the license holder responsible for after repair? - answer- Inspecting the repairs,
and functioning of all control devices and positioning of valves.
, What type of heat and combustion equipment are required with the air pollution control
code? - answer- All burners fire with solid, liquid, or gas. Including rubbish
burners/incinerators.
What temperature are the products of combustion upon exit in low temperature
equipment? - answer- Less than 600 degrees
What temperature are the products of combustion upon exit in medium temperature
equipment? - answer- 6001000
What temperature are the products of combustion upon exit in high temperature
equipment? - answer- 1000+
How much cfm of air be capable of per gallon of oil per hour? - answer- 36 cfm
If ventilation is supplied mechanically, what is required of the pressure? - answer- It
must be greater than the atmospheric pressure outdoors
How are flue dampers designed? - answer- So that they cannot completely cut off
passage of flue gasses at any time
When can tight closing dampers be installed? - answer- When accompanied by
approved automatical draft and combustion controls.
What is the minimum flashpoint for fuel oils to mean hydrocarbon oils? - answer- 100
degrees
What type of oils should be used in low pressure burners? - answer- No. 1(range oil),
no. 2(diesel oil), no. 4, no. 5, no. 6
What oil is prohibited? - answer- Crank case refuse oil
What is required of the size of overflow pipes? - answer- They should at least be the
same size as supply pipes
Where should a relief valve be installed? - answer- In the discharge line between the
pump and the first shut off valve
How is oil heated in storage tanks? - answer- Coils using low pressure hot water/steam
or approved electric heaters.
Where are shut off valves required? - answer- One at the supply line at the tank and
and one at the supply line at the burner
What stops the flow of oil? - answer- Remote control
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GEEKA. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
72349 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now