Exam (elaborations)
Contractor License: Questions & Answers (Graded A+)
- Course
- Institution
Contractor License: Questions & Answers (Graded A+)
[Show more]
Content preview
Contractor License: Questions & Answers (Graded A+)The minimum head room for stairs is __________ . Right Ans - 6'-8"
Un-reinforced parapet wall shall have a minimum thickness of ___________________ inches. Right Ans - 8
A standard glass masonry unit is ______________ inches thick. Right Ans - 3- 7/8
______________ are used to face nail jack rafters to hips. Right Ans - Two 16d common nails
Joist end notches shall not exceed ____________ of the joist depth. Right Ans - one- fourth
The maximum slope of a ramp is _____________. Right Ans - 1:12
_______________ feet is the minimum width for pedestrian walkway in front if a construction site. Right Ans - 4
Wood shingles are fastened to the roof with a minimum ______________ fasteners
per shingle. Right Ans - 2
_____________ is the broadcasting of a flame over a surface. Right Ans - flame spread
The bottom of the clear opening for class E classroom emergency escape and rescue opening serving children older than grade 5, shall not be greater than __________ inches. Right Ans - 44
Standby power shall be provided for smoke control systems to span _______ minute power interruptions. Right Ans - 15
The total area of mezzanines must not exceed __________ of the room in which it
is located. Right Ans - 1/3
When installing asphalt shingles over one ply of fifteen pound felt what is the minimum allowable roof slope? Right Ans - 4:12 ASTM ______________ covers testing samples of fresh concrete. Right Ans - C 172
During the time concrete is being placed, metal reinforcement may _____________. Right Ans - be rust covered
A mortar bed on top of a footing should be between ___________ and _______________. Right Ans - 1/4" and 3/4"
Waterproofing shall be applied from the bottom of the wall a minimum of ____________ inches above the maximum elevation of ground water table. Right Ans - 12
Metal shingles have a fire classification of ___________. Right Ans - B
The minimum width of any egress door opening shall be _________ inches. Right Ans - 32
Buildings made with the use of heavy timber are classification Type ___________.
Right Ans - IV
Asphalt shingles shall only be used on roof slopes of ___________ or greater. Right Ans - 2:12
Corrugated or flat plastic skylights shall have a slope of at least ______________. Right Ans - 4:12
What is the minimum thickness of aluminum used as valley lining material? Right Ans - 0.024 inch
The maximum slope for permanent fill on a building lot is _____________. Right Ans - 50%
Cements and aggregates used in concrete shall comply with _______________. Right Ans - ACI 318
Which of the following is not approved for attaching asphalt shingles? Right Ans - staples A cricket or saddle shall be installed on the ridge side of any chimney greater than _____ inches. Right Ans - 30
When fire blocking is required, the spacing must not exceed _______________. Right Ans - 10 feet
What is the maximum unlatching force for panic and fire hardware? Right Ans - 15 lbs.
The grade shall be sloped away from a building no less than 1:20 for a minimum distance of how many feet? Right Ans - 10
Nails used to install mechanically laminated flooring shall be ________ times as long as the thickness of the boards. Right Ans - 2- 1/2
Property owners who are planning on digging deep excavations on their property must notify all adjacent property owners within __________ days of starting the excavation work. Right Ans - 10
Joist girders must not be ______________. Right Ans - bridged
The end ancore bolt for a deep long span joist is ___________. Right Ans - 3/4 inch
What does the 15 denote on the deep long span joist destination 56DLH15? Right Ans - chord number
Bearing depth of a K-series joist is ____________ inches. Right Ans - 2- 1/2
Bridging attachment to the joist must be capable of resisting a horizontal force
of not less than __________ pounds. Right Ans - 700
Placing construction loads on unbridged joists is allowed if _____________________________. Right Ans - it is not allowed under any circumstances
OSHA required that a bundle of bridging not exceed a total of ___________ pounds. Right Ans - 1000
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Studyhall. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $19.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
81989 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now