Exam (elaborations)
IMSE 250 EXAM 2 - Assignments Review (1)
- Course
- Institution
IMSE 250 EXAM 2 - Assignments Review (1)
[Show more]
Seller
Follow
lydiaomutho
Content preview
IMSE 250 EXAM 2 - Assignments ReviewSuppose a cylindrical part is turned by one pass. The diameter is reduced from 60 mm to 58
mm. What is the DOC? - ANS-1 mm
A cylindrical part with diameter 50 mm is rotating at 600 revolutions per minute (rpm). What is
the surface speed? - ANS-~94 m/min (meters per minute)
In orthogonal cutting, the cutting edge of the tool is _______ to the direction of the relative
velocity between the tool and the workpiece. - ANS-Perpendicular
Assume the uncut chip thickness is 0.2 mm and the chip thickness is 0.25 mm. The rake angle
of the tool is 20 degrees. What is the shear angle?
20 degrees
1 degree
46 degrees - ANS-46 degrees
Ductile materials tend to result in what type of chips? - ANS-Continuous
BUE (built-up edge) is undesirable for ________ cutting but sometimes is desirable for ______
cutting - ANS-Finish
Rough
Generally speaking, what happens to the power requirement when the speed, feed, or depth of
cut is increased? - ANS-It increases
Generally speaking, what happens to the cutting temperature when speed is increased? -
ANS-It increases
Generally speaking, what happens to the toughness as the hardness of a cutting tool material
increases? - ANS-It decreases
Generally speaking, what happens to tool wear when the cutting temperature increases? -
ANS-It decreases
Carbide tool coating can be achieved through either chemical vapor deposition (CVD) or
physical vapor deposition (PVD). Which one is conducted at a higher temperature? - ANS-CVD
Which one of the following is NOT a multipoint cutting tool?
A milling cutter
A twist drill bit
A reamer
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller lydiaomutho. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79373 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now