JLTV Test A (2024) Questions and Answers 100% Solved
42 views 0 purchase
Course
JLTV
Institution
JLTV
JLTV Test A (2024) Questions and Answers
100% Solved
Fill in the blanks in the vehicle hierarchy below: Correct answer UTL
GENERAL PURPOSE
HEAVY
CLOSE COMBAT
TRAILER
2. Why do the High Pressure Gas (HPG) pumps automatically stop running after running
continuously for 10 minutes?
A. To p...
JLTV Test A (2024) Questions and Answers 100% Solved Fill in the blanks in the vehicle hierarchy below: Correct answer UTL GENERAL PURPOSE HEAVY CLOSE COMBAT TRAILER 2. Why do the High Pressure Gas (HPG) pumps automatically stop running after running continuously for 10 minutes? A. To prevent overcharging of the suspension components and HPG Spring components B. To prevent the SPNSN ERROR light from illuminating C. To prevent the hydraulic pumps that power the springs' pumps from overheating D. To prevent system leakage Correct answer C. To prevent the hydraulic pumps that power the springs' pumps from overheating 3. The transaxle receives power from the A. Engine B. Transmission C. CTIS D. Suspension system Correct answer Transmission Height for mudding stuff Correct answer 30in, 60in 5. Air over hydraulic brakes function by: A. The engine -driven belt provides power to the hydraulic pumps for the brakes. B. The air pressure for service brakes is monitored by the CTIS, CTIS sends the signal to the hydraulic components of when to apply or not apply. C. The CAC controls the air circulation directly to the service brake, when the service brake is engaged it pushes hydraulic fluid through the lines to activate the brakes. When the air system is charged, the air pressure holds the hydraulic braking components open so they cannot apply; when service brake applied, it drops psi allowing hydraulic components to apply/engage. Correct answer When the air system is charged, the air pressure holds the hydraulic braking components open so they cannot apply; when service brake applied, it drops psi allowing hydraulic components to apply/engage. Locate the buttons on the MUX panel Correct answer Blackout Switch Head Lights and Clearence Lights Internal Dome Light Selector Dome Light Dimmer Dash Light Dimmer 7. List the five Suspension Settings the DRIVER uses. Correct answer Answer: JLTV Test A (2024) Questions and Answers 100% Solved Operational, Loading, Tie Down, Fording, and SAES 8. Combat Override is only to be used in emergency situations, which of the factors below are true for how Combat Override affects the JLTV? A. Provides for an emergency bypass in the event of DSDU failure. B. Disables neutral safety start C. Bypasses all speed limitations protecting the drivetrain and CTIS settings protecting the wheels D. All of the above. Correct answer All of the above 9. What tool is shown below and what is its purpose? Correct answer An emergency ingress tool, which is used to open the doors in the event of a casualty or rollover 10. What do you do if an item in the Basic Issue Items (BIl) appears to be broken or unserviceable? A. Try to fix it. B. Annotate it on the BIl Inventory as serviceable. C. Annotate it on the Bll Inventory as unserviceable and then continue with your mission. D. Annotate it on the BII Inventory and call MT representative Correct answer D. Annotate it on the BII Inventory and call MT representative 11. List five Before Operations Inspection items to check before driving the JLTV. Correct answer Possible answers include: Damage or pilferage; Leaks; Fuel, oil, and water levels; Engine warm -up; Instruments; Safety devices; Tools and equipment 12. Why must you install suspension lockout braces before crawling under the vehicle? Correct answer Answer: The suspension lockout braces prevent the suspension from fully collapsing, as that would crush the personnel underneath the vehicle. 13. While conducting PMCS, you notice the transmission fluid has a small leak but it is not big enough to form a drop. Classify the leak and decide if you can operate the vehicle. A. It is a Class I leak so you can operate the vehicle. B. It is a Class I leak so you CANNOT operate the vehicle. C. It is a Class II leak so you can operate the vehicle. D. It is a Class II leak so you CANNOT operate the vehicle. Correct answer A. It is a Class I leak so you can operate the vehicle. 14. Identify the fill locations on the following image of the JL TV engine. Write the letter of the location next to the corresponding fill location description. Correct answer Brake Fluid Fill A and D
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GOLDTUTORS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.49. You're not tied to anything after your purchase.
