API 653 Recertification Quiz with 100% Correct
Per API 653 , with of the following is required when converting an existing tank to
operation at elevated temperatures when it was not originally designed and constructed
to API 650, Appendix M? - Correct Answer ️️ -The Shell to bottom joint sha...
API 653 Recertification Quiz with 100% Correct Per API 653 , with of the following is required when converting an existing tank to operation at elevated temperatures when it was not originally designed and constructed to API 650, Appendix M? - Correct Answer ✔️✔️-The Shell to bottom joint shall be evaluated for fatigue When removing an existing tank bottom, all arc -gouged areas of the tank shell -to-
bottom shall be: - Correct Answer ✔️✔️-examined using magnetic particle inspection, and defective areas repaired and re -examined. If RBI assessment has been conducted and the tank has cathodic protection plus a thin -
film lining, the maximum inspection interval is: - Correct Answer ✔️✔️-14 years When installing a new nozzle in a tank of unknow material, what stress value should be used to calculate the required shell thickness and reinforcement? - Correct Answer ✔️✔️-
20,000 lbf/in2 In regards to underside corrosion on tank bottoms, the corrosion rate of steel in a wet environment. - Correct Answer ✔️✔️-may double with every 18 °F increase in temperature above 77 °F. Grade 350W/50W is acceptable for tank plate to a maximum thickness of: - Correct Answer ✔️✔️-45mm ( 1.75in) if fully killed and made to a fine grain practice. If an RBI assessment has been conducted and the tank has a release prevention barrier, the ma ximum initial inspection interval is: - Correct Answer ✔️✔️-25 years As an alternative to the procedures in API 653 for the evaluation of any thinning of the tank shell below minimum required wall thickness may be evaluated for continued service using whic h code? - Correct Answer ✔️✔️-API RP 579, section 4, 5 or 6. When welding on a tank shell constructed of Group I steel that is greater than 1.5 inches thick below what minimum metal temperature ?preheat? - Correct Answer ✔️✔️-
200°F When evaluated an existi ng temperature services tank, which has a successful service history of operation but was not originally designed and constructed to the requirement of API 650, appendix M, which condition temperature has to be used? - Correct Answer ✔️✔️-The max Operating Temperature shall not exceed the temperature at which the tank has successfully operated in the pass. Flange material used for tank repair and alteration shall meet the minimum requirements for the material specifications according to: - Correct Answer ✔️✔️-The as built standard which is an advantage of thick film UN -REINFORCED linings ? - Correct Answer ✔️✔️-
Fast curing and can be put back in service after 24 hours at normal ambient temperature. The perimeter welds on a welded -on patch plate in the critic al zone should be ? - Correct Answer ✔️✔️-Two-pass and examined visually and by either MP or PT. Existent welds on a tank shell are found to e closer than allowed by API 650 (7th Edition). Under what conditions can these welds be considered to be acceptabl e for
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller BrittieDonald. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.49. You're not tied to anything after your purchase.
