Exam (elaborations)
Millwright Red Seal Study Guide with Complete Solutions 100% Correct 2024.
- Course
- Institution
Millwright Red Seal Study Guide with Complete Solutions 100% Correct 2024.
[Show more]
Seller
Follow
LectDan
Reviews received
Content preview
Millwright Red Seal Study Guide withComplete Solutions 100% Correct 2024.
Which of the following best describes a free flow control valve?
A) It is the simplest form of directional control allowing flow in one direction only
B) They are used to prevent a load suspended by a cylinder from free fall
C) They operate actuators at different times
D) They make a humming sound when activated
E) They control the rate of fluid flow in a hydraulic circuit
E) They control the rate of fluid flow in a hydraulic circuit
A lifter is a solid or hydraulic device that connects the:
A) crankshaft and the piston.
B) camshaft and the pushrod
.C) piston and the rocker arm.
D) rocker arm and the valve.
B) camshaft and the pushrod
1. Who is responsible for safety in the workplace?
A) The employer
B) The employee
C) The general public
D) All of the above
D)All of the above
On a small impulse steam turbine the nozzle ring is located and bolted in place:
A) at the steam chest side.
B) near the exhaust outlet.
C) at the reversing chamber.
D) next to the second rotor.
A) at the steam chest side.
1. What is nominal pipe size based on?
A) Outside diameter
B) Inside diameter
C) The type of factory heat treatment used
D) The process of manufacture
B) Inside diameter
,1. A scaffold is designed for static loads and accelerating loads.
A) True
B) False
B) False
1. A fire alarm system can provide how many types of signals?
A) 5
B) 4
C) 3
D) 2
C) 3
1. The flow properties above the pour point are usually the same as the flow properties at the flow
point.
A) True
B) False
B) False
What type of valve is usually installed with a rupture relief valve?
A) Butterfly
B) Plug
C) Balanced
D) Needle
B) Plug
1. The Workplace Hazardous Materials Information System is designed to protect the worker from
exposure to harmful substances.
A) True
B) False
A) True
1. With hydraulics, when applying sealant to a pipe thread it is important to avoid the first _____ from
the end of the pipe.
A) 4
B) 3
C) 2
C) 2
1. The type of oil filter that traps small particles in a fibrous material is the ______ filter.
A) surface
B) depth
C) edge
D) centrifuge
, B) depth
1. On an electric governing system the sensors:
A) detect speed.
B) generates an output signal for the actuator.
C) moves the fuel metering control to change the amount of fuel delivered.
D) do all of the above.
A) detect speed.
1. The WHMIS system requires ____types of identification.
A) 5
B) 4
C) 3
D) 2
C) 3
1. Which of the following best describes copper and brass pipe?
A) It is used for its corrosion resistance but not at hydraulic pressures
B) It can not be used for high pressure and high temperatures
C) They offer excellent corrosion resistance but they catalyze the oxidation of hydraulic fluid
D) It is mainly used in pipes that carry a corrosive product at high temperatures and pressure
E) It is the most common material for making pipe
C) They offer excellent corrosion resistance but they catalyze the oxidation of hydraulic fluid
1. In line check valves are available in a range of flows up to _____ gpm.
A) 250
B) 165
C) 100
D) 87
C) 100
1. When a piston on an engine travels from the Top Dead Centre position to the Bottom Dead Centre
position and takes on fuel, the piston has traveled thru the _____ stroke.
A) intake
B) compression
C) power
D) exhaust
A) intake
1. The efficiency of a gas turbine can be reduced by:
A) contaminants in the engine air supply.
B) abrasive particles eroding the blades.
C) fuel not fully vaporized.
D) all of the above.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LectDan. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $13.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
62890 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now