NACE CIP 1 Exam Questions With Verified Answers New Update 2023 | 2024 (Graded A+)
1 view 0 purchase
Course
NACE CIP 1
Institution
NACE CIP 1
NACE CIP 1 Exam Questions With Verified Answers New Update 2023 | 2024 (Graded A+)
How is the process of steel corrosion ALWAYS described?
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which three can be used effectively as galvanic anodes for carbon st...
nace cip 1 exam questions with verified answers ne
Written for
NACE CIP 1
All documents for this subject (172)
Seller
Follow
LectDan
Reviews received
Content preview
NACE CIP 1 Exam Questions With Verified Answers New
Update 2023 | 2024 (Graded A+)
How is the process of steel corrosion ALWAYS described?
electrochemical
Based on the galvanic series presented in the NACE CIP Level 1 Manual, which
three can be used effectively as galvanic anodes for carbon steel?
zinc, aluminum, magnesium
A decrease in temperature will generally cause the corrosion rate to _____
decrease
The electrolyte is a medium which carries the following type of current?
Ionic
Corrosion occurring uniformly across a surface is called _____
general corrosion
When a conflict occurs on a coatings project, as the inspector, the preferred first
course of action is to _____
actively listen and endeavor to understand the positions of others
A proper coating specification should contain information regarding ____, ____,
and ____
surface preparation standards, safety, and locations to be used
Is it ever okay to accept a gift from a contractor?
NO
What should you do if you find discrepancies between the specification and the
coating manufacturer's technical data sheet?
seek written clarification from the owner's representative
What are the general components of inspection reports?
- results of inspection tests
- location(s) of work
- details of preparation and application
Inspection reports typically provide sufficient detail permitting the owner to
evaluate ___ ___ ___ ___
- contractor's performance
- inspector's performance
- job progress
- work interruptions
As an inspector headed to the job site for the first time, where would you always
find instruction regarding appropriate types of PPE?
Safety Data Sheet (SDS), previously called MSDS
Materials inventory report should contain which of the following?
- quantity of each component of each material onsite
- material batch numbers
- date of materials arrival at job site and storage information
The primary function of the coating inspector is _____
specification compliance
High humidity in the air during coating application can cause _____
,solvent entrapment
The temperature at which moisture condenses on a surface is called _____
dew point
Where should the steel surface temperature reading be taken?
at the actual work location
What type of water should be added to a sling psychrometer?
distilled
Which type of coating is manufactured with the specific components added to
slow down the activity of the electrochemical cell?
inhibitive
Which coating component forms a stable film that retains its characteristic
properties?
binder/resin
A barrier coating interrupts the ______ of the electrochemical cell.
electrolyte
List the three mechanisms by which coatings adhere to a substrate
1. Polar
2. Chemical
3. Mechanical
What is the rule for coating work when it comes to Dew Point and Steel
Temperature?
Steel Temperature must be 5 degrees less than the Dew Point
What characteristics of solvents influence coatings?
- solvency power
- volatility
The contractor's sling psychrometer gives a different reading than your electric
hygrometer. What would you do first as an inspector?
verify calibration of both instruments
Which of the following coating are co-reacting?
- polyurethane
- epoxy
Fusion Bond Epoxy (FBE) is most commonly used to coat ____
pipe
Which coatings may require external moisture to cure?
- single component polyurethane
- solvent borne inorganic zinc
Amine blush is likely to occur with which type of coating?
epoxy
Which type of coating cures the fastest?
Polyurea
When an inorganic Zinc Rich primer is applied too heavily a common result is
______
mud cracking
Commonly used primers for steel structures are ?
, - epoxy
- inorganic zinc
- organic zinc
Coatings that cure by polymerization are _____
convertible
Water-borne latex coatings cure by a process known as _____
coalescence
On a blast-cleaned surface, ultraviolet ligt can reveal _____
oil
You are an inspector on a project with a sprayed polyurethane coating. The
probable safety concern is _______
isocyanates
The requirements of a coatings project are defined by which document?
coating specification
A prejob conference is useful for discussions on which of the following?
- safety
- cleaning
- application
- schedule
You are the inspector on a project where the specified level of cleanliness is
"near white". Which standard would you follow?
NACE No. 2 / SSPC-SP 10
The power tool standard for cleaning to bare metal with minimum profile of 1 Mil
(25.4 microns) is ______
SSPC-SP 11
What is referenced by ISO 8503?
Grit and Shot profile comparators
List the reasons that mill scale is typically removed:
- to avoid future delamination
- to improve coating adhesion
- to eliminate a source of galvanic corrosion
Which standard defines a "commercially" blast cleaned surface?
NACE No. 3 / SSPC-SP 6
ISO SA 2-1/2 is a blast cleaning surface that is similar to which joint standard?
NACE No. 2 / SP 10
Approximately 75% of premature coating features are caused by _____
inadequate or improper surface preparation
NACE SP0178 comparator addresses ___ ___ ___ ___
- butt welds
- lap welds
- radius edges
- finishing grades of weld
You are on a project where Testex Tape is specified to determine surface profile
by ASTM D4417 Method C. What is likely to cause reading errors?
- dust on the surface
- using incorrect grade of tape
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller LectDan. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $14.99. You're not tied to anything after your purchase.
