NCCER Module 6 -Device Boxes, Pull and Junction Boxes 2023 Questions and Answers 100% Verified
The maximum weight allowed by the NEC when celling fans are mounted directly to an approved, unmarked outlet box is _______ pounds.
35
Square metal boxes are available in sizes of 4" and____.
4 and ...
NCCER ELECTRICAL LEVEL 3 Module 6 'Distribution
Equipment' 2023 Questions and Answers
Which of the following is true with regard to switchboards
Switchboards are used to subdivide large blocks of power
When installing wiring within switchgear, use self adhesive cable ties every ___.
12" (300mm)
The maximum voltage that a piece of equipment can withstand is known as its
____.
Basic impulse insulation level (BIL)
Bolted pressure switches are often used in place of ___.
Circuit breakers
A transformer's temperature rise rating refers to ___.
The maximum elevation above ambient temperature that the transformer can withstand
without insulation damage
A service has a three-phase supply with 14 single-pole circuits and 4 three-pole
circuits. The minimum number of poles required is ___.
30
Per NEC Section 408.3(E)(1), AC phasing in switchboards must be labeled ___.
A,B,C from front to back, top to bottom, or left to right when read facing the front of the
switchboard
On a typical electrical diagram, the standard abbreviation for a phase meter is __.
PH
The typical insulation resistance of equipment rated at 480V is ___.
100 megohms
A typical overpotential test voltage for a used piece of equipment with a nominal
voltage class of 600V is ___.
2,000 VDC
A ground fault relay should be mounted in an enclosure ___.
In a vertical position with the terminal block at the lower end
In Industrial applications, medium voltage may refer to systems rated over ___.
1,000V up to 35,000V
The term Interrupting rating refers to the ___.
maximum current a device will safely interrupt at rated voltage
Which of the following is NOT a general classification of circuit breakers?
Fuse circuit breaker
A 4,000A switchboard requires a minimum distance from the phase bus to the
closest steel member of ____.
6" (150mm)
When an unintended path is established between an ungrounded conductor and
ground, it is called a(n)____.
ground fault
A transformer rated at more than 500kVA is considered a(n) ___.
power transformer
The term capacity on a transformer nameplate refers to ____.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller magdamwikash23. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.
