ELC 2023 COMPLETE GUIDE 140 Ans- minimum required pressure in a water distribution system is _____ kpa top Ans- Where should an air release valve be placed on a water main? 0.05 Ans- What is the free cl2 residual that would be reportable (adverse - AWQI) for a sample collected in the distribution ...
ELC 2023 COMPLETE GUIDE
140 Ans- minimum required pressure in a water distribution system is _____ kpa
top Ans- Where should an air release valve be placed on a water main?
0.05 Ans- What is the free cl2 residual that would be reportable (adverse - AWQI) for a sample collected
in the distribution system ? (mg/l)
full position Ans- When using a fire hydrant, the valve should be opened to the...
unsupported loose soil Ans- The angle of repose is the angle of slope of
pipe size, material, grade Ans- What affects the flow capacity of an installed pipeline?
0.2 Ans- The minimum acceptable free chlorine residual in the distribution system is ___ mg/l
loss of pressure Ans- Friction in a pipeline can cause
air gap Ans- Which of the following is approved to prevent backflow
8 Ans- Access ladders in a trench must be spaced such that workers are within ____ m of the ladder
less than Ans- At the same flow, friction losses through a 12-inch line are ____ through a 6-inch line.
floor Ans- . A chlorine feed room should be ventilated near the
hepatitis Ans- Operators working in a wastewater treatment plant should get the following shots
, decomposition of sulphides in the absence of oxygen Ans- Hydrogen Sulphide gas is generated from the
use self contained air, have help standing by Ans- What should an operator do when entering a room
containing a chlorine gas?
maximum allowable concentration Ans- The term MAC in ODWS refers to
atmosphere, safety equipment, barricades Ans- What must be checked prior to entering a man hole
explosion hazard Ans- Why are gasoline and volatile solvents objectionable when present in a sewer?
all chemicals used in workplace Ans- MSDS sheets are required for
flow rates higher than design flows Ans- Cavitation in pumps is caused by pumping
constant at a constant speed Ans- The discharge flow rate of a piston type pump is
install surge tank Ans- One method of minimizing water hammer is to
chain of custody Ans- What documentation must accompany all samples sent to a lab for water or
wastewater analysis
0.6 Ans- The minimum velocity in a sanitary sewer is _____m/s
turbidity Ans- What information is not required on a CoC for a water distribution sample sent to the lab.
for bacterial analysis (Total Coliforms, E. coli)
above the sanitary sewer Ans- If a water main and a sanitary sewer must be located in the same trench,
it is recommended that the water main be located
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller CertifiedGrades. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.