Testout Server Pro Ch. 4-6 Exam 2021/2022 questions and answers
6 views 0 purchase
Course
Testout Server Pro Ch. 4-6
Institution
Testout Server Pro Ch. 4-6
Testout Server Pro Ch. 4-6 Exam 2021/2022 questions and answers You manage the domain. All servers run Windows Server, and all workstations run Windows 10. Members of the sales team have been issued laptops that they use both to connect to the local network and dial in when they are on the road. A...
testout server pro ch 4 6 exam 20212022 questions and answers
you manage the westsimcom domain all servers run windows server
and all workstations run windows 10 members of the sales team have b
Written for
Testout Server Pro Ch. 4-6
All documents for this subject (1)
Seller
Follow
EvaTee
Reviews received
Content preview
Testout Server Pro Ch. 4-6
You manage the westsim.com domain. All servers run Windows Server, and all
workstations run Windows 10. Members of the sales team have been issued laptops
that they use both to connect to the local network and dial in when they are on the road.
A single DHCP server at the main office assigns IP addresses on the 192.168.1.0/24
subnet.
Your company has just opened a new branch office, which the sales team uses when
they are traveling. They can go to the branch office and plug in their laptops for Internet
access and to read email. Because the office is small, you decide not to use a DHCP
server. You select 10.0.0.0/24 for the network address.
The sales team complains that when they are at the branch office,they are unable to
access the Internet through the network. You ask one of them to run ipconfig, and you
note the IP address is 169.254.12.4.
You want to enable access on both the main office and the branch office. What should
you do? - Answer On each laptop, configure an alternate IP configuration
The Large Block Corporation has a network with three subnets. The network has a DNS
server
that provides name resolution.
Stacy has been asked to implement a DHCP solution for her network. Currently, all
hosts use manually-configured static IP addresses. She installs a DHCP server and
configures it to deliver IP address, default gateway, and DNS server configuration
information. - Answer 1. Configure each host to obtain DNS server address
automatically.
2. Configure each host to obtain an IP address automatically.
You have a single router with three subnets as follows:
• SubnetA = 50 hosts
• SubnetB = 15 hosts
• SubnetC = 65 hosts
You need to select a subnet mask for each subnet that provides sufficient host
addresses without wasting addresses.
Which mask values should you use? - Answer SubnetA = 255.255.255.192
SubnetB = 255.255.255.224 SubnetC = 255.255.255.128
You need to design a network that supports 275 hosts. You want to place all hosts in a
single broadcast domain, and you want to make sure you do not waste IP addresses.
How should you implement your plan? - Answer Place all hosts on the same subnet.
Use a mask of 255.255.254.0.
You have a single router with three subnets as follows:
• Subnet A = 60 hosts
• Subnet B = 25 hosts
• Subnet C = 31 hosts
You need to choose subnet addresses and masks for each subnet. Which values would
you use? - Answer A = Subnet address 172.22.19.64 with mask of 255.255.255.192
B = Subnet address 172.22.19.32 with mask of 255.255.255.224
,Testout Server Pro Ch. 4-6
C = Subnet address 172.22.19.192 with mask of 255.255.255.192
You have a server connected to two networks:
• SubnetA uses a 26-bit mask. • SubnetB uses a 29-bit mask.
Wrk1 is on SubnetA, and Wrk2 is on SubnetB. Wrk1 cannot communicate with Wrk2.
You run ipconfig on both workstations and see the following information:
Wrk1
IPv4 Address : 192.168.201.135
Subnet Mask: 255.255.255.192
Default Gateway.: 192.168.201.190
Wrk2
IPv4 Address : 172.30.199.78
Subnet Mask: 255.255.255.248
Default Gateway: 172.30.199.70 - Answer Change the IP address assigned to Wrk2.
You have a small network as shown in the image.
You are unable to ping Wrk2 from Wrk1. What should you do to fix the problem? -
Answer Change the subnet mask on Wrk1.
You have a small network with three subnets, as shown in the graphic. IP addresses for
each router interface are also indicated.
You need to connect Wrk1_A to SubnetA and Wrk5_C to SubnetC. Which IP addresses
should you use? (Select two.) - Answer Wrk1_A = 192.168.111.62
Wrk5_C = 10.155.64.97
You manage the small network that is connected to the Internet, as shown in the
graphic. You add HostA to the network. All hosts use manually-assigned TCP/IP values.
The subnet where HostA resides uses a 28-bit subnet mask.
Which TCP/IP configuration values should you choose for HostA? To answer, drag a
value to each TCP/IP parameter shown in the diagram. - Answer IP Address : 10.0.0.97
Subnet Mask: 255.255.255.240
Default Gateway: 10.0.0.110
You manage a Windows computer connected to a business network that uses switches
and multiple subnets.
You connect a workstation to the 192.168.1.0/24 subnet.
The workstation can communicate with some hosts on the private network, but not with
other hosts. You run ipconfig /all and see the following:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : mydomain.local
Description . . . . . . . : Broadcom network adapter
Physical Address. . . . . . : 00-AA-BB-CC-74-EF
DHCP Enabled . . . . . . . : No
Autoconfiguration Enabled. . . : Yes
IPv4 Address . . . . . . . : 192.168.1.102(Preferred)
Subnet Mask . . . . . . . : 255.255.255.0
, Testout Server Pro Ch. 4-6
Default Gateway. . . . . . . . . : 192.168.2.1 DNS Servers. . . . . . . . . . . : 192.168.2.20
What should you do? - Answer Edit the IPv4 properties and change the default
gateway.
You have a Windows laptop that uses DHCP for IPv4 addressing information.
You need to see the IPv4 address, subnet mask, and DNS server addresses that the
network connection is currently using.
What should you do? (Select two. Each choice is a possible solution.) - Answer 1. View
the status for the network connection. Click the Details button.
2.Run the ipconfig command.
You manage a company network with multiple subnets. As part of a recent upgrade,
you have upgraded all servers to Windows Server 2016. Client systems run Windows
10.
You would like to begin to use IPv6 on your network. You want to run both IPv4 and
IPv6 on all systems, phasing out IPv4 when all systems become IPv6-capable.
You want to manually assign private IPv6 addresses to the servers and the client
computers.
Which of the following prefixes should you use? (Choose two. Each choice is a possible
solution.) - Answer 1.FC00::
2.FD00::
You manage a company network with multiple subnets. As part of a recent upgrade,
you have upgraded all servers to Windows Server 2016. Client systems currently run
Windows 10.
You have previously configured all hosts on the network with static IPv6 addresses,
default
gateway, and DNS server addresses. IPv6 is working correctly between all hosts.
You have changed the network configuration so that each host gets the IPv6 prefix and
default gateway information from neighboring routers. You want each host to generate
the interface ID automatically from its MAC address. You will deliver DNS server
addresses through DHCPv6 and have configured one of the servers for DHCPv6.
What additional tasks must you perform to complete the configuration? (Choose two.
Each choice is a required part of the solution.) - Answer 1.In the network connection
properties on each client, select Obtain DNS server address automatically.
2.In the network connection properties on each client, select Obtain an IPv6 address
automatically.
You manage a small private network with three subnets, as shown in the image.
The App1 server on SubnetC runs only IPv6. Because of your company policy, it cannot
be configured with an IPv4 address. An IPv4-only router connects SubnetA with
SubnetB, while a Windows Server server running Routing and Remote Access (Rtr1)
connects SubnetB with SubnetC.
The Wrk2 computer runs Windows and has been configured with both an IPv4 and an
IPv6 address. You need to enable Wrk2 to communicate with App1 using IPv6.
What should you do? - Answer Configure Rtr1 as an ISATAP router.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller EvaTee. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
