Package deal
CCENT Exam Compilations/ VERIFIED.
CCENT, Exams Review Questions and answers, rated A+| LATEST EXAM UPDATES| 2024/25 |
[Show more]CCENT, Exams Review Questions and answers, rated A+| LATEST EXAM UPDATES| 2024/25 |
[Show more]CCENT, Exam Review Questions and 
answers, rated A+ 
Question: You have an ACL entry that has the address of 192.168.101.0 and the wildcard mask of 
0.0.0.255. 
What is the range of IPv4 addresses that will be affected by this ACL? 
A. 192.168.101.100 through 192.168.101.200 
B. 192.168.101.200 t...
Preview 2 out of 9 pages
Add to cartCCENT, Exam Review Questions and 
answers, rated A+ 
Question: You have an ACL entry that has the address of 192.168.101.0 and the wildcard mask of 
0.0.0.255. 
What is the range of IPv4 addresses that will be affected by this ACL? 
A. 192.168.101.100 through 192.168.101.200 
B. 192.168.101.200 t...
CCENT, Review Exam Questions and 
answers, rated A+ 
Which OSI Layer header contains the address of a destination host that is on another network? - 
Network 
Which layer of the TCP/IP stack combines the OSI model physical and data link layers? - Network 
Access Layer 
Which layer of the OSI model...
Preview 2 out of 6 pages
Add to cartCCENT, Review Exam Questions and 
answers, rated A+ 
Which OSI Layer header contains the address of a destination host that is on another network? - 
Network 
Which layer of the TCP/IP stack combines the OSI model physical and data link layers? - Network 
Access Layer 
Which layer of the OSI model...
CCENT, Exam Questions and answers. 
Graded A+ 
C - -In the configuration of NAT, what does the keyword overload signify? 
A. When bandwidth is insufficient, some hosts will not be allowed to access network translation. 
B. The pool of IP addresses has been exhausted. 
C. Multiple internal hosts w...
Preview 4 out of 38 pages
Add to cartCCENT, Exam Questions and answers. 
Graded A+ 
C - -In the configuration of NAT, what does the keyword overload signify? 
A. When bandwidth is insufficient, some hosts will not be allowed to access network translation. 
B. The pool of IP addresses has been exhausted. 
C. Multiple internal hosts w...
CCENT / CCNA Exam Review Questions 
and answers. VERIFIED/ 
Routers operate at which layer of the OSI model? - -network, level 3. 
Bits are packaged into frames at which layer of the OSI model? - -data link, level 2. 
Which of the following are benefits of using a layered network model? 
A . it sp...
Preview 2 out of 11 pages
Add to cartCCENT / CCNA Exam Review Questions 
and answers. VERIFIED/ 
Routers operate at which layer of the OSI model? - -network, level 3. 
Bits are packaged into frames at which layer of the OSI model? - -data link, level 2. 
Which of the following are benefits of using a layered network model? 
A . it sp...
CCENT Study, Exam Review Questions 
and answers/ 
Which characteristics are representative of a link-state routing protocol? (Choose three.) 
A. provides common view of entire topology 
B. exchanges routing tables with neighbors 
C. calculates shortest path 
D. utilizes event-triggered updates 
E. ...
Preview 4 out of 122 pages
Add to cartCCENT Study, Exam Review Questions 
and answers/ 
Which characteristics are representative of a link-state routing protocol? (Choose three.) 
A. provides common view of entire topology 
B. exchanges routing tables with neighbors 
C. calculates shortest path 
D. utilizes event-triggered updates 
E. ...
CCENT Review Questions and answers. 
Graded A+ 
Which three statements are true about the operation of a full-duplex Ethernet network? (Choose three.) 
A. There are no collisions in full-duplex mode 
B. A dedicated switch port is required for each full-duplex node. 
C. Ethernet hub ports are prec...
Preview 2 out of 8 pages
Add to cartCCENT Review Questions and answers. 
Graded A+ 
Which three statements are true about the operation of a full-duplex Ethernet network? (Choose three.) 
A. There are no collisions in full-duplex mode 
B. A dedicated switch port is required for each full-duplex node. 
C. Ethernet hub ports are prec...
CCENT Practice Questions & Answers, 
rated A+ 
Which Cisco IOS command would be used to display the configured range of IP addresses, statistics for a 
number of currently leased addresses, and a high water mark for leases from each configured pool? - 
-show ip dhcp pool 
Host A, in one Ethernet V...
Preview 2 out of 8 pages
Add to cartCCENT Practice Questions & Answers, 
rated A+ 
Which Cisco IOS command would be used to display the configured range of IP addresses, statistics for a 
number of currently leased addresses, and a high water mark for leases from each configured pool? - 
-show ip dhcp pool 
Host A, in one Ethernet V...
CCENT EXAM STUDY GUIDE (chapters 1 
- 20), Questions and answers, rated A+ 
Adjacent-Layer Interaction - -The general topic of how on one computer , two adjacent layers in a 
network architectural model work together, with the lower layer providing services to higher layer 
De-encapsulation - -On ...
Preview 4 out of 62 pages
Add to cartCCENT EXAM STUDY GUIDE (chapters 1 
- 20), Questions and answers, rated A+ 
Adjacent-Layer Interaction - -The general topic of how on one computer , two adjacent layers in a 
network architectural model work together, with the lower layer providing services to higher layer 
De-encapsulation - -On ...
CCENT Exam Review Questions and 
answers, rated A+ 
A poorly designed network typically includes which of the following? (Choose three) 
A. Security vulnerabilities 
B. Large broadcast domains 
C. Small broadcast domains 
D. Proper documentation 
E. Management and support challenges - -A. Security ...
Preview 4 out of 43 pages
Add to cartCCENT Exam Review Questions and 
answers, rated A+ 
A poorly designed network typically includes which of the following? (Choose three) 
A. Security vulnerabilities 
B. Large broadcast domains 
C. Small broadcast domains 
D. Proper documentation 
E. Management and support challenges - -A. Security ...
CCENT Exam Review Questions and 
answers, rated A+ 
A,B,E - -Which three statements are true about the operation of a full-duplex Ethernet network? 
(Choose three.) 
A. There are no collisions in full-duplex mode 
B. A dedicated switch port is required for each full-duplex node. 
C. Ethernet hub...
Preview 4 out of 119 pages
Add to cartCCENT Exam Review Questions and 
answers, rated A+ 
A,B,E - -Which three statements are true about the operation of a full-duplex Ethernet network? 
(Choose three.) 
A. There are no collisions in full-duplex mode 
B. A dedicated switch port is required for each full-duplex node. 
C. Ethernet hub...
CCENT Exam Review Questions and 
answers, rated A+ 
What are the 7 layers of the OSI model? - -1. physical 
2. data link 
3. network 
4. transport 
5. session 
6. presentation 
7. application 
What are the 4 layers of the TCP/IP model? - -1. Application 
2.Transport 
3.Internet 
4.Network Interface...
Preview 2 out of 7 pages
Add to cartCCENT Exam Review Questions and 
answers, rated A+ 
What are the 7 layers of the OSI model? - -1. physical 
2. data link 
3. network 
4. transport 
5. session 
6. presentation 
7. application 
What are the 4 layers of the TCP/IP model? - -1. Application 
2.Transport 
3.Internet 
4.Network Interface...
CCENT Exam Review Questions and 
answers, Verified. 
A poorly designed network typically includes which of the following? (Choose three) 
A. Security vulnerabilities 
B. Large broadcast domains 
C. Small broadcast domains 
D. Proper documentation 
E. Management and support challenges - A. Security ...
Preview 4 out of 66 pages
Add to cartCCENT Exam Review Questions and 
answers, Verified. 
A poorly designed network typically includes which of the following? (Choose three) 
A. Security vulnerabilities 
B. Large broadcast domains 
C. Small broadcast domains 
D. Proper documentation 
E. Management and support challenges - A. Security ...
CCENT Exam Review questions and 
answers, graded A+ 
What Layer does CDP operate at? - -Layer 2 
Name the OSI Layers - -(7)Application,(6)Presentation,(5)Session,(4)Transport, (3)Network, (2)Data 
Link, (1)Physical 
Name the TCP/IP Layers - -(5)Application, (4)Transport, (3)Internet, (2)Data-Link,...
Preview 2 out of 13 pages
Add to cartCCENT Exam Review questions and 
answers, graded A+ 
What Layer does CDP operate at? - -Layer 2 
Name the OSI Layers - -(7)Application,(6)Presentation,(5)Session,(4)Transport, (3)Network, (2)Data 
Link, (1)Physical 
Name the TCP/IP Layers - -(5)Application, (4)Transport, (3)Internet, (2)Data-Link,...
CCENT Exam Review Questions and 
answers, Graded A+ 
What does BASE mean in 100BASE-T and 1000BASE-T? - -BASE in 100BASE-T and 1000BASE-T refers 
to the baseband signaling method. Basedband is a network technology in which only one carrier 
frequency is used. This means that when a device transmi...
Preview 2 out of 14 pages
Add to cartCCENT Exam Review Questions and 
answers, Graded A+ 
What does BASE mean in 100BASE-T and 1000BASE-T? - -BASE in 100BASE-T and 1000BASE-T refers 
to the baseband signaling method. Basedband is a network technology in which only one carrier 
frequency is used. This means that when a device transmi...
CCENT Exam Questions and answers, 
VERIFIED/ 
Fast Ethernet - Common name for all the IEEE standards that send data at 100 megabits per second 
Subnet - Subdivisions of class A,B, or C networks. allows single network to be used instead of 
multiple, while still allowing large number of IP addresse...
Preview 3 out of 20 pages
Add to cartCCENT Exam Questions and answers, 
VERIFIED/ 
Fast Ethernet - Common name for all the IEEE standards that send data at 100 megabits per second 
Subnet - Subdivisions of class A,B, or C networks. allows single network to be used instead of 
multiple, while still allowing large number of IP addresse...
CCENT EXAM ANSWERS. All 
Examinable Questions/ 
The following items describe the functions performed at various OSI model layers: 
Logical topology, hardware addresses, media access, framing 
Logical device identification, path identification and selection 
Flow control, reliable data transfer, w...
Preview 2 out of 12 pages
Add to cartCCENT EXAM ANSWERS. All 
Examinable Questions/ 
The following items describe the functions performed at various OSI model layers: 
Logical topology, hardware addresses, media access, framing 
Logical device identification, path identification and selection 
Flow control, reliable data transfer, w...
CCENT CHAPTER 1 EXAM ANSWERS. 
All Examinable Questions/ 
A network administrator enters the command copy running-config startup-config. Which type of 
memory will the startup configuration be placed into? 
a) flash 
b) RAM 
c) NVRAM 
d) ROM - -c) 
Which packet-forwarding method does a router use t...
Preview 2 out of 10 pages
Add to cartCCENT CHAPTER 1 EXAM ANSWERS. 
All Examinable Questions/ 
A network administrator enters the command copy running-config startup-config. Which type of 
memory will the startup configuration be placed into? 
a) flash 
b) RAM 
c) NVRAM 
d) ROM - -c) 
Which packet-forwarding method does a router use t...
CCENT CH 2 Study Exam Questions & 
Answers, rated A+ 
In the LAN for a small office, some user devices connect to the LAN using a cable, while others connect 
using wireless technology (and no cable). Which of the following is true regarding the use of Ethernet in 
this LAN? 
*Only the devices th...
Preview 4 out of 36 pages
Add to cartCCENT CH 2 Study Exam Questions & 
Answers, rated A+ 
In the LAN for a small office, some user devices connect to the LAN using a cable, while others connect 
using wireless technology (and no cable). Which of the following is true regarding the use of Ethernet in 
this LAN? 
*Only the devices th...
CCENT Certification Exam Questions 
and answers, rated A+ 
5 Major Components of a Network 
Endpoints 
Interconnections 
Switches 
Routers 
WLAN Devic
Preview 2 out of 13 pages
Add to cartCCENT Certification Exam Questions 
and answers, rated A+ 
5 Major Components of a Network 
Endpoints 
Interconnections 
Switches 
Routers 
WLAN Devic
CCENT 1-13 Exam Review Questions 
and answers, rated A+ 
Configuring port address translation a four-step process. t/f - -f 
Which type of NAT is the simplest form? - -static 
Which of the following are valid Private Addresses? 
a. 192.167.134.1 
b. 172.29.1.1 
c. 10.155.23.156 
d. 224.0.0.5 - -b, ...
Preview 4 out of 36 pages
Add to cartCCENT 1-13 Exam Review Questions 
and answers, rated A+ 
Configuring port address translation a four-step process. t/f - -f 
Which type of NAT is the simplest form? - -static 
Which of the following are valid Private Addresses? 
a. 192.167.134.1 
b. 172.29.1.1 
c. 10.155.23.156 
d. 224.0.0.5 - -b, ...
Cisco CCENT Exam Questions & 
answers, rated A+ 
Which of the following protocols are examples of TCP/IP transport layer protocols? - -UDP/TCP 
Which of the following protocols are examples of TCP/IP data link layer protocols? - -PPP 
Ethernet 
The process of HTTP asking TCP to send some data and m...
Preview 4 out of 36 pages
Add to cartCisco CCENT Exam Questions & 
answers, rated A+ 
Which of the following protocols are examples of TCP/IP transport layer protocols? - -UDP/TCP 
Which of the following protocols are examples of TCP/IP data link layer protocols? - -PPP 
Ethernet 
The process of HTTP asking TCP to send some data and m...
Cisco CCENT, Exam Review Questions 
and answers, rated A+ 
Which design feature will limit the size of a failure domain in an enterprise network? - -the use of 
the building switch block approach 
Which two things should a network administrator modify on a router to perform password recovery? 
(C...
Preview 3 out of 26 pages
Add to cartCisco CCENT, Exam Review Questions 
and answers, rated A+ 
Which design feature will limit the size of a failure domain in an enterprise network? - -the use of 
the building switch block approach 
Which two things should a network administrator modify on a router to perform password recovery? 
(C...
CCENT, Exam Review Questions 
and answers, rated A+ 
Physical topology diagrams (1) - -Identify the physical location of intermediary devices, configured 
ports, and cable installation. Refers to the physical connections and identifies how end devices and 
infrastructure devices such as routers, ...
Preview 4 out of 32 pages
Add to cartCCENT, Exam Review Questions 
and answers, rated A+ 
Physical topology diagrams (1) - -Identify the physical location of intermediary devices, configured 
ports, and cable installation. Refers to the physical connections and identifies how end devices and 
infrastructure devices such as routers, ...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller Terryl. Stuvia facilitates payment to the seller.
No, you only buy these notes for $36.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
72042 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now