Fire Inspector I & II Bundled Exams Questions and Answers Multiple Versions Already Passed

Fire Inspector 2 Exam Questions Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. - 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. - 500...

Fire Inspector II Test Prep How big are DOT labels? - 4 inch square, on point Where is the primary DOT label? - On the left How many hazards can be on a DOT label? - several NFPA 704 - Hazardous Materials Marking System Placard: Blue means..... - Health Hazard Placard: Red means......

Fire Inspector 2: Combined Fire protection engineers have established _____ PSI as a minimum required residual pressure when computing the available water for flow test results. - 20psi The most common gallonage rating for horizontal shaft pumps in use today are _____ - _____ GPM. - 500 - 15...

Fire Inspector 2 Study Guide A code is: - A legal requirement of a building feature or operating feature at a certain location A standard is: - A set of specifications or requirements that is considered industry best practice and meets a minimum level of performance guidelines The most im...

Fire Inspector II Test Where would you look to determine if the damper requirements have been included and correct on a set of drawings? - On the mechanical plan Which plans sheet gives specific details for exit signs? - Electrical plans Which plan would you look at to find exit door fire ...

Fire Inspector 1 Study Questions What is the minimum acceptable residual pressure in a water supply system that must be available for firefighting? - 20 psi What type of sprinkler system is a type of dry system that, when activated, flows water from all heads at the same time because all of ...

Fire Inspector 1 Test Review Exterior walls and structural members that are of approved noncombustible or limited combustible materials and interior structural members constructed wholly or partly of wood are considered - Type III To protect steel structural components of a building, which o...

FIRE INSPECTOR 1 EXAM PREP What can effective fire inspections, plan reviews, and public education efforts result in? A) Prevention of fires B) Prevention of loss of life C) Improvement of public image D) All of the above. - D) All of the above. The "Three Es of Fire Prevention" identify...

Fire Inspector I Prep Test 1 The first step in the enforcement procedure would usually be to: A. notify the responsible party of his/her appeal rights. B. determine whether the violation is significant enough in nature to pursue. C. send the business owner a letter stating the premises are in ...

Fire Inspector 1 CDC Study Guide All of the statements about the administrative duties of a fire inspector are TRUE EXCEPT: - The administrative work of the fire inspector is typically delegated to the fire chief Before you plan a meeting: - Make sure that the meeting is the best way to accom...

The floor in spray booths must be made of? - non-combustible materials Specifies fire codes and standards that are adipted and implemented by all DOD fire departments - UFC 3-600-1 establishes the foundation for fire prevention and education programs - DoD instructions 6055.06 2 ways to h...

Fire Inspector 1 Study Guide (State of Florida) The inspector must have a through knowledge and understanding of the following items: - Enabling legislation, State/Local Statues, ways to alter State/Local Statues The personnel given the responsibility for fire and life safety inspections p...