Package deal
NCCER Bundled Exams Questions and Answers 100% Verified and Updated 2024 | Graded A
NCCER Bundled Exams Questions and Answers 100% Verified and Updated 2024 | Graded A
[Show more]NCCER Bundled Exams Questions and Answers 100% Verified and Updated 2024 | Graded A
[Show more]Hand tools Exam Questions and Answers 100% Pass 
Another name for a machinist's hammer - Answer- ball-peen hammer 
A heavy-duty took used to drive posts or other large stakes - Answer- sledgehammer 
Proper angle for the edge of a cold chisel - Answer- 60 degrees 
A type of screw shown (square in a ...
Preview 1 out of 2 pages
Add to cartHand tools Exam Questions and Answers 100% Pass 
Another name for a machinist's hammer - Answer- ball-peen hammer 
A heavy-duty took used to drive posts or other large stakes - Answer- sledgehammer 
Proper angle for the edge of a cold chisel - Answer- 60 degrees 
A type of screw shown (square in a ...
Module 5 NCCER TEST construction 
drawings 100% Solved 2024 
Plans used for work that has to do with construction in or on the earth are called - 
Answer- Civil Plans 
The material used for the walls would be found in the? - Answer- Structural Plans 
Information in a drawings title block identifies ...
Preview 1 out of 2 pages
Add to cartModule 5 NCCER TEST construction 
drawings 100% Solved 2024 
Plans used for work that has to do with construction in or on the earth are called - 
Answer- Civil Plans 
The material used for the walls would be found in the? - Answer- Structural Plans 
Information in a drawings title block identifies ...
NCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
Preview 1 out of 2 pages
Add to cartNCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
CORE Mod 104 Power Tools Review 1 
Questions and Answers 100% Pass 
What is a Porta-Power tool? 
A)a hydraulic powered tool 
B)a electric tool 
C)a pneumatic tool 
D)a DC battery tool - Answer- A)a hydraulic powered tool 
A power miter saw is a saw that combines a miter box with a circular saw. True...
Preview 2 out of 5 pages
Add to cartCORE Mod 104 Power Tools Review 1 
Questions and Answers 100% Pass 
What is a Porta-Power tool? 
A)a hydraulic powered tool 
B)a electric tool 
C)a pneumatic tool 
D)a DC battery tool - Answer- A)a hydraulic powered tool 
A power miter saw is a saw that combines a miter box with a circular saw. True...
NCCER - Power Tools (104 - 6th Edition) Exam 
Questions and Answers 100% Pass 
Before connecting any power tool to a power source, it is critical to ______ - Answer- 
Confirm the power switch is set to OFF 
When using power tools, NEVER engage the ______ - Answer- Trigger Lock 
Before replacing part...
Preview 1 out of 3 pages
Add to cartNCCER - Power Tools (104 - 6th Edition) Exam 
Questions and Answers 100% Pass 
Before connecting any power tool to a power source, it is critical to ______ - Answer- 
Confirm the power switch is set to OFF 
When using power tools, NEVER engage the ______ - Answer- Trigger Lock 
Before replacing part...
NCCER Module 9 Introduction to Materials Handling 
Exam Questions and Answers 100% Pass 
What is the proper procedure to lift objects? - Answer- Lift with your legs, keep your 
back straight, and keep your head up. 
In order to work with motorized materials-handling equipment, you must be? - Answer-...
Preview 1 out of 4 pages
Add to cartNCCER Module 9 Introduction to Materials Handling 
Exam Questions and Answers 100% Pass 
What is the proper procedure to lift objects? - Answer- Lift with your legs, keep your 
back straight, and keep your head up. 
In order to work with motorized materials-handling equipment, you must be? - Answer-...
Introduction to Handtools Exam 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is _____? - Answer- Ball-peen hammer. 
The proper angle for the edge of a cold chisel is _____? - Answer- 60 degrees 
How many sides does a hexagon shape have? - Answer- Six 
To quickly run a nut ...
Preview 1 out of 1 pages
Add to cartIntroduction to Handtools Exam 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is _____? - Answer- Ball-peen hammer. 
The proper angle for the edge of a cold chisel is _____? - Answer- 60 degrees 
How many sides does a hexagon shape have? - Answer- Six 
To quickly run a nut ...
1x sold
Power Tools Study Guide with Complete Solutions 
A power miter saw combines a miter box with a? - Answer- Circular saw. 
When using an air wrench, - Answer- keep your body stance balanced. 
The angle grinder is used to grind _______? - Answer- hard, heavy metals. 
An example of an AC source of power...
Preview 1 out of 2 pages
Add to cartPower Tools Study Guide with Complete Solutions 
A power miter saw combines a miter box with a? - Answer- Circular saw. 
When using an air wrench, - Answer- keep your body stance balanced. 
The angle grinder is used to grind _______? - Answer- hard, heavy metals. 
An example of an AC source of power...
Core Module 00104-09 Power Tools Exam 
Questions and Answers 100% Pass 
Activate this to make the trigger stay in operating mode even without your finger on the 
trigger. - Answer- Trigger Lock 
Reverses its direction at regularly recurring intervals; this type of current is delivered 
through wall ...
Preview 1 out of 2 pages
Add to cartCore Module 00104-09 Power Tools Exam 
Questions and Answers 100% Pass 
Activate this to make the trigger stay in operating mode even without your finger on the 
trigger. - Answer- Trigger Lock 
Reverses its direction at regularly recurring intervals; this type of current is delivered 
through wall ...
Power Tools Exam Questions and 
Answers 100% Pass 
A substance, such as sandpaper, that is used to wear away material. - Answer- 
Abrasive 
An electrical current that reverses its direction at regularly recurring intervals; the 
current delivered through wall plugs. - Answer- AC (alternating current...
Preview 1 out of 3 pages
Add to cartPower Tools Exam Questions and 
Answers 100% Pass 
A substance, such as sandpaper, that is used to wear away material. - Answer- 
Abrasive 
An electrical current that reverses its direction at regularly recurring intervals; the 
current delivered through wall plugs. - Answer- AC (alternating current...
Module 0103-15 Introductions to hand tools 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is 
A. Ball-peen hammer 
B. Claw hammer 
C. Veneer hammer 
D. Sledgehammer - Answer- A. Ball-peen hammer 
A heavy-duty tool used to drive posts or other large stakes is a 
A. Mallet 
B...
Preview 2 out of 6 pages
Add to cartModule 0103-15 Introductions to hand tools 
Questions and Answers 100% Pass 
Another name for a machinist's hammer is 
A. Ball-peen hammer 
B. Claw hammer 
C. Veneer hammer 
D. Sledgehammer - Answer- A. Ball-peen hammer 
A heavy-duty tool used to drive posts or other large stakes is a 
A. Mallet 
B...
NCCER MODULE 7 ( Bacis communication skills 
Questions and Answers 100% Correct 
in the study of communication, noise is best described as? - Answer- anything that 
interferes with a message being heard or understood 
folding your arms in front of you makes it seem as if you are? - Answer- distant/u...
Preview 1 out of 1 pages
Add to cartNCCER MODULE 7 ( Bacis communication skills 
Questions and Answers 100% Correct 
in the study of communication, noise is best described as? - Answer- anything that 
interferes with a message being heard or understood 
folding your arms in front of you makes it seem as if you are? - Answer- distant/u...
NCCER Power Tools Exam Questions and 
Answers 100% Pass 
A tool feature added for convenience that turned out to be very unsafe and should never 
be used is the... - Answer- Trigger Lock. 
Before changing the blade or bit or doing any kind of repair... - Answer- Unplug the 
Tool! 
Before plugging in...
Preview 1 out of 4 pages
Add to cartNCCER Power Tools Exam Questions and 
Answers 100% Pass 
A tool feature added for convenience that turned out to be very unsafe and should never 
be used is the... - Answer- Trigger Lock. 
Before changing the blade or bit or doing any kind of repair... - Answer- Unplug the 
Tool! 
Before plugging in...
NCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
Preview 1 out of 2 pages
Add to cartNCCER Module 4 (Power tools) Exam 
Questions and Answers 100% Pass 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills wil...
NCCER module 6 ( intro to basic rigging 
Questions and Answers 100% Pass 
the max load weight that a sling is designed to carry is the? - Answer- rated capacity 
most alloy steel chain slings can be used in Temps up to? - Answer- 500°F (260°c) 
when a tattle tail has been pulled into the jacket of...
Preview 1 out of 1 pages
Add to cartNCCER module 6 ( intro to basic rigging 
Questions and Answers 100% Pass 
the max load weight that a sling is designed to carry is the? - Answer- rated capacity 
most alloy steel chain slings can be used in Temps up to? - Answer- 500°F (260°c) 
when a tattle tail has been pulled into the jacket of...
Power Tools Study Guide with 100% Complete Solutions 
Pneumatic tools get their power from: - Answer- Air pressure. 
The most common use of the power drill is to: - Answer- Make holes in wood, metal, 
and plastic. 
A masonry bit is able to drill into concrete and similar material because it has a: -...
Preview 1 out of 4 pages
Add to cartPower Tools Study Guide with 100% Complete Solutions 
Pneumatic tools get their power from: - Answer- Air pressure. 
The most common use of the power drill is to: - Answer- Make holes in wood, metal, 
and plastic. 
A masonry bit is able to drill into concrete and similar material because it has a: -...
NCCER Module 8 (employability skills) 
Questions and Answers 100% Pass 
a companies documented philosophy is called its? - Answer- mission statement 
the time to learn about a potential employer is? - Answer- before an application is ever 
submitted 
when preparing a resume, you should? - Answer- fo...
Preview 1 out of 2 pages
Add to cartNCCER Module 8 (employability skills) 
Questions and Answers 100% Pass 
a companies documented philosophy is called its? - Answer- mission statement 
the time to learn about a potential employer is? - Answer- before an application is ever 
submitted 
when preparing a resume, you should? - Answer- fo...
power tools NCCER Exam Questions and 
Answers 100% Pass 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood, 
metal, and plastic 
Hammer drills are design...
Preview 1 out of 4 pages
Add to cartpower tools NCCER Exam Questions and 
Answers 100% Pass 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood, 
metal, and plastic 
Hammer drills are design...
NCCER Electrical module 2 (electrical safety) 
Questions and Answers 100% Pass 
under strict safety guidelines, which of the following should be used to discharge 
capacitors before working on de-energized circuits. - Answer- safety shorting probe 
for safety, assume that any facility constructed be...
Preview 1 out of 2 pages
Add to cartNCCER Electrical module 2 (electrical safety) 
Questions and Answers 100% Pass 
under strict safety guidelines, which of the following should be used to discharge 
capacitors before working on de-energized circuits. - Answer- safety shorting probe 
for safety, assume that any facility constructed be...
NCCER Module 3 (Hand Tools) Questions and 
Answers 100% Pass 
what is another name for a machinist hammer? - Answer- Ball-peen hammer 
a heavy duty tool used to drive posts or other large stakes is called a? - Answer- 
Sledgehammer 
what is the proper angle for the edge of a cold chisel? - Answer- 6...
Preview 1 out of 2 pages
Add to cartNCCER Module 3 (Hand Tools) Questions and 
Answers 100% Pass 
what is another name for a machinist hammer? - Answer- Ball-peen hammer 
a heavy duty tool used to drive posts or other large stakes is called a? - Answer- 
Sledgehammer 
what is the proper angle for the edge of a cold chisel? - Answer- 6...
NCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
Preview 1 out of 3 pages
Add to cartNCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
NCCER Electrical module 5 (NEC) Exam 
Questions and Answers 100% Pass 
NEC chapter 5 contains? - Answer- specialty occupancy areas 
which of the following serves as the intro to the NEC and provides an overview of the 
book? - Answer- NEC article 90 
organizations that test products for safety are? ...
Preview 1 out of 1 pages
Add to cartNCCER Electrical module 5 (NEC) Exam 
Questions and Answers 100% Pass 
NEC chapter 5 contains? - Answer- specialty occupancy areas 
which of the following serves as the intro to the NEC and provides an overview of the 
book? - Answer- NEC article 90 
organizations that test products for safety are? ...
NCCER Module 4 (Power tools) Exam 
Questions and Answers 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills will not hamm...
Preview 1 out of 2 pages
Add to cartNCCER Module 4 (Power tools) Exam 
Questions and Answers 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
make sure it is disconnected from its source or energy 
most hammer drills will not hamm...
NCCER Module 1 (safety) Questions and Answers 
100% Pass | Verified & Updated 
companies with strong safety cultures usually have lower? - Answer- incident and 
accident rates 
what is a statement regarding safety? - Answer- it's a learned behavior and attitude 
poor lighting, excessive noise, and ...
Preview 1 out of 3 pages
Add to cartNCCER Module 1 (safety) Questions and Answers 
100% Pass | Verified & Updated 
companies with strong safety cultures usually have lower? - Answer- incident and 
accident rates 
what is a statement regarding safety? - Answer- it's a learned behavior and attitude 
poor lighting, excessive noise, and ...
NCCER Module 9 (material handling) 
Questions and Answers 100% Pass 
before attempting to lift any materials? - Answer- make sure the load does not have 
perusing nails wires or sharp edges 
before attempting to lower an overhead load? - Answer- size up the load 
what is the proper procedure to lift...
Preview 1 out of 2 pages
Add to cartNCCER Module 9 (material handling) 
Questions and Answers 100% Pass 
before attempting to lift any materials? - Answer- make sure the load does not have 
perusing nails wires or sharp edges 
before attempting to lower an overhead load? - Answer- size up the load 
what is the proper procedure to lift...
NCCER 2024 Exam Questions Marking Scheme 100% Correct 
NCCER is a ___________ - Answer- not-for-profit 501(c)(3) educational foundation 
Building a safe, productive, and sustainable workforce of craft professionals is 
_________ - Answer- the mission of NCCER 
NCCER standardized curricula have been ...
Preview 1 out of 3 pages
Add to cartNCCER 2024 Exam Questions Marking Scheme 100% Correct 
NCCER is a ___________ - Answer- not-for-profit 501(c)(3) educational foundation 
Building a safe, productive, and sustainable workforce of craft professionals is 
_________ - Answer- the mission of NCCER 
NCCER standardized curricula have been ...
NCCER Exam Questions and Answers 100% Pass 
The plane in space where the centrifugal force pushing an object out into space is equal 
to the gravitational force pulling an object toward Earth is called a - Answer- 
geostationary orbit 
A multipoint-to-point satellite uplink/downlink configuration is...
Preview 1 out of 3 pages
Add to cartNCCER Exam Questions and Answers 100% Pass 
The plane in space where the centrifugal force pushing an object out into space is equal 
to the gravitational force pulling an object toward Earth is called a - Answer- 
geostationary orbit 
A multipoint-to-point satellite uplink/downlink configuration is...
NCCER Module 4 (Power tools) & construction drawings EXAM 
150 QUESTIONS AND CORRECT DETAILED ANSWERS 
(VERIFIED ANSWERS) | ALREADY GRADED A+ 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
mak...
Preview 1 out of 2 pages
Add to cartNCCER Module 4 (Power tools) & construction drawings EXAM 
150 QUESTIONS AND CORRECT DETAILED ANSWERS 
(VERIFIED ANSWERS) | ALREADY GRADED A+ 
when using power tools, never engage the? - Answer- trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? - Answer- 
mak...
NCCER Test Marking Scheme 100% Verified 
A UL listed rod type ground electrode must have minimum length of - Answer- 8'' 
in a circuit of pure capacitance, the current leads the voltage by - Answer- 90 degrees 
The standard unit for measuring the cross sectional area of wire is the - Answer- circu...
Preview 1 out of 3 pages
Add to cartNCCER Test Marking Scheme 100% Verified 
A UL listed rod type ground electrode must have minimum length of - Answer- 8'' 
in a circuit of pure capacitance, the current leads the voltage by - Answer- 90 degrees 
The standard unit for measuring the cross sectional area of wire is the - Answer- circu...
4x sold
NCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
Preview 1 out of 3 pages
Add to cartNCCER Module 4 Intro to power tools Exam 
Questions and Answers 100% Pass 
A saw that has a thin one-piece blade that runs around guides, that runs around either 
end of the saw is a - Answer- Band saw 
A power miter saw combines a miter box with a - Answer- Circular saw 
An angle grinder is used to...
power tools NCCER ACTUAL EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS (VERIFIED ANSWERS) 100% Verified 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood...
Preview 1 out of 4 pages
Add to cartpower tools NCCER ACTUAL EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS (VERIFIED ANSWERS) 100% Verified 
what does pneumatic mean? - Answer- Air power 
What kind of power does a porta power use? - Answer- Hydraulic power 
The most common use of the power drill is to what? - Answer- Make holes in wood...
NCCER Hand Tools Questions and Answers 100% Verified 
ball-peen hammer - Answer- another name for a machinist's hammer 
sledge hammer - Answer- a heavy-duty tool used to drive posts or other large stakes 
60 degree angle - Answer- the proper angle for the edge of a cold chisel 
reed and prince - An...
Preview 1 out of 2 pages
Add to cartNCCER Hand Tools Questions and Answers 100% Verified 
ball-peen hammer - Answer- another name for a machinist's hammer 
sledge hammer - Answer- a heavy-duty tool used to drive posts or other large stakes 
60 degree angle - Answer- the proper angle for the edge of a cold chisel 
reed and prince - An...
NCCER Module 2 Exam Questions and Answers 100% pass 
An estimator is preparing a bid for a home remodeling project. She has determined that 
the new garage needs 324 feet of 2x10 lumber; the new rec room requires 430 feet; and 
the new upstairs bonus room needs 283 feet. How many feet of 2x10 lumber...
Preview 3 out of 23 pages
Add to cartNCCER Module 2 Exam Questions and Answers 100% pass 
An estimator is preparing a bid for a home remodeling project. She has determined that 
the new garage needs 324 feet of 2x10 lumber; the new rec room requires 430 feet; and 
the new upstairs bonus room needs 283 feet. How many feet of 2x10 lumber...
NCCER Core Module 1 Exam 
Questions and Answers 100% Pass 
Companies with strong safety cultures usually have lower? - Answer- Turnover 
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of 
- Answer- unsafe conditions 
The activity that consists of breaking a job i...
Preview 1 out of 3 pages
Add to cartNCCER Core Module 1 Exam 
Questions and Answers 100% Pass 
Companies with strong safety cultures usually have lower? - Answer- Turnover 
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of 
- Answer- unsafe conditions 
The activity that consists of breaking a job i...
Basic Safety - NCCER EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS 100% Verified 
Apparatus - Answer- An assembly of machines used together to do a particular job 
Arc - Answer- The flow of electrical current through a gas such as air form one pole to 
another pole 
Arc Welding - Answer- The joining ...
Preview 2 out of 5 pages
Add to cartBasic Safety - NCCER EXAM QUESTIONS AND CORRECT 
DETAILED ANSWERS 100% Verified 
Apparatus - Answer- An assembly of machines used together to do a particular job 
Arc - Answer- The flow of electrical current through a gas such as air form one pole to 
another pole 
Arc Welding - Answer- The joining ...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller EmilyCharlene. Stuvia facilitates payment to the seller.
No, you only buy these notes for $55.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
82871 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now