Package deal
Journeyman Electrician Bundled Exams 2023 with 100% correct answers
Journeyman Electrician Exam 2023 with 100% correct answers Michigan Journeyman test exam 2023 with 100% correct answers
[Show more]Journeyman Electrician Exam 2023 with 100% correct answers Michigan Journeyman test exam 2023 with 100% correct answers
[Show more]Conductors with _____ marked on the insulation are NOT approved for use in a wet location. correct answersTHHN 
 
conductors with THHN insulation are approved for use in dry and damp locations only and conductors with THWN, THHW, and THW insulation are recognized for use in dry and wet locations. 
 ...
Preview 2 out of 12 pages
Add to cartConductors with _____ marked on the insulation are NOT approved for use in a wet location. correct answersTHHN 
 
conductors with THHN insulation are approved for use in dry and damp locations only and conductors with THWN, THHW, and THW insulation are recognized for use in dry and wet locations. 
 ...
An electromagnet can be switched on and off correct answersAnd advantage of an electromagnet over a permanent magnet is 
 
Scatters light uniformly in all directions correct answersAn excellent diffuser surface is one that 
 
In a photovoltaic cell correct answersLight is converted into electricity ...
Preview 2 out of 7 pages
Add to cartAn electromagnet can be switched on and off correct answersAnd advantage of an electromagnet over a permanent magnet is 
 
Scatters light uniformly in all directions correct answersAn excellent diffuser surface is one that 
 
In a photovoltaic cell correct answersLight is converted into electricity ...
A fixed light will be allowed to be 30 amp provided the socket is rated ____ duty. 
a. Light 
b. Medium 
c. Heavy 
d. Extra Heavy correct answersc. Heavy 
 
From the Skilled Trades Act, Section 7 "Except as otherwise provided in this article or in subsection (3), and individual other than an indivi...
Preview 3 out of 18 pages
Add to cartA fixed light will be allowed to be 30 amp provided the socket is rated ____ duty. 
a. Light 
b. Medium 
c. Heavy 
d. Extra Heavy correct answersc. Heavy 
 
From the Skilled Trades Act, Section 7 "Except as otherwise provided in this article or in subsection (3), and individual other than an indivi...
What table sizes bonding jumpers for for AC systems? correct answers250.102(C)(1) 
 
The NEC defines continuous load to be a load where max current on the circuit continues for at least how many hours? correct answersThree 
 
To use the adjustment factors in table 310.15(B)(3)(A), you must have grea...
Preview 2 out of 9 pages
Add to cartWhat table sizes bonding jumpers for for AC systems? correct answers250.102(C)(1) 
 
The NEC defines continuous load to be a load where max current on the circuit continues for at least how many hours? correct answersThree 
 
To use the adjustment factors in table 310.15(B)(3)(A), you must have grea...
Conductors with _____ marked on the insulation are NOT approved for use in a wet location. 
a. THW 
b. THHW 
c. THHN 
d. THWN correct answersTHHN 
As shown in Table 310.104(A), conductors with THHN insulation are approved for use in dry and damp locations only and conductors with THWN, THHW, and THW...
Preview 2 out of 10 pages
Add to cartConductors with _____ marked on the insulation are NOT approved for use in a wet location. 
a. THW 
b. THHW 
c. THHN 
d. THWN correct answersTHHN 
As shown in Table 310.104(A), conductors with THHN insulation are approved for use in dry and damp locations only and conductors with THWN, THHW, and THW...
Where a water pipe passes over an indoor motor control center, leak protection apparatus shall have a MINIMUM clearance of _____. 
 
a) 6 feet to the protection apparatus 
b) 6 feet to the water pipe 
c) 6 1⁄2 feet to the protection apparatus 
d) 6 1⁄2 feet to the water pipe correct answersA: 6 ...
Preview 2 out of 8 pages
Add to cartWhere a water pipe passes over an indoor motor control center, leak protection apparatus shall have a MINIMUM clearance of _____. 
 
a) 6 feet to the protection apparatus 
b) 6 feet to the water pipe 
c) 6 1⁄2 feet to the protection apparatus 
d) 6 1⁄2 feet to the water pipe correct answersA: 6 ...
Where the outer sheath of Type MI cable is made of steel _____________. 
 
A. it shall provide an adequate path to serve as an equipment grounding conductor 
 
B. a separate equipment grounding conductor shall be provided 
 
C. the grounding and grounded conductors shall be connected together 
 
D. ...
Preview 2 out of 10 pages
Add to cartWhere the outer sheath of Type MI cable is made of steel _____________. 
 
A. it shall provide an adequate path to serve as an equipment grounding conductor 
 
B. a separate equipment grounding conductor shall be provided 
 
C. the grounding and grounded conductors shall be connected together 
 
D. ...
A fitting is a part of a wiring system that is intended primarily to perform which type of function? correct answersmechanical 
 
When the disconnecting means of a transformer is located remotely it must be? correct answerslockable 
 
If installed and routed on the outside of a raceway, the length o...
Preview 2 out of 10 pages
Add to cartA fitting is a part of a wiring system that is intended primarily to perform which type of function? correct answersmechanical 
 
When the disconnecting means of a transformer is located remotely it must be? correct answerslockable 
 
If installed and routed on the outside of a raceway, the length o...
Unless listed and identified otherwise, terminations and conductors of sizes 14 AWG through 1 AWG shall be rated at _____. 
 
a) 75°C 
b) 75°F 
c) 90°C 
d) 60°C correct answersD: 60°C 
Ref: 110.14(C)(1)(a)(1) 
 
The MINIMUM size copper equipment bonding jumper on the supply side of a service co...
Preview 2 out of 8 pages
Add to cartUnless listed and identified otherwise, terminations and conductors of sizes 14 AWG through 1 AWG shall be rated at _____. 
 
a) 75°C 
b) 75°F 
c) 90°C 
d) 60°C correct answersD: 60°C 
Ref: 110.14(C)(1)(a)(1) 
 
The MINIMUM size copper equipment bonding jumper on the supply side of a service co...
1x sold
There are six conductors in a race way connected to 75° C rated circuit breaker. Each wire has a 70 amp load using THHM conductors. The minimum size conductors used our #_________AWG correct answers4 
 
Thermal insulation shall not be installed within _________inches of recessed lighting fixtures c...
Preview 2 out of 7 pages
Add to cartThere are six conductors in a race way connected to 75° C rated circuit breaker. Each wire has a 70 amp load using THHM conductors. The minimum size conductors used our #_________AWG correct answers4 
 
Thermal insulation shall not be installed within _________inches of recessed lighting fixtures c...
Where K=12.9, what is the approximate voltage-drop on a circuit where an 80-ampere, 240-volt, single-phase load is supplied with size 3 AWG copper conductors with THWN insulation, and placed 200 feet from a panelboard? 
 
*Chapter 9 tables, table 8 conductor properties 
(pg. 70-689) correct answer...
Preview 2 out of 13 pages
Add to cartWhere K=12.9, what is the approximate voltage-drop on a circuit where an 80-ampere, 240-volt, single-phase load is supplied with size 3 AWG copper conductors with THWN insulation, and placed 200 feet from a panelboard? 
 
*Chapter 9 tables, table 8 conductor properties 
(pg. 70-689) correct answer...
If you must guess on an exam question, most of the time the answer is... correct answersB or C 
 
As a general rule, an insulated equipment grounding conductor of a branch circuit shall be identified by which color? correct answersGreen 
 
An emergency electrical disconnect provided for a gasoline m...
Preview 2 out of 6 pages
Add to cartIf you must guess on an exam question, most of the time the answer is... correct answersB or C 
 
As a general rule, an insulated equipment grounding conductor of a branch circuit shall be identified by which color? correct answersGreen 
 
An emergency electrical disconnect provided for a gasoline m...
_______ can be generated. 
I. Electricity II. Electrical Energy 
a. I only 
b. II only 
c. both I and II 
d. neither I nor II correct answersAns. b 
 
A phenomenon where a circuit stores electrical energy is called ______. 
a. Inductance 
b. Capacitance 
c. Resistance 
d. Susceptance correct answer...
Preview 3 out of 23 pages
Add to cart_______ can be generated. 
I. Electricity II. Electrical Energy 
a. I only 
b. II only 
c. both I and II 
d. neither I nor II correct answersAns. b 
 
A phenomenon where a circuit stores electrical energy is called ______. 
a. Inductance 
b. Capacitance 
c. Resistance 
d. Susceptance correct answer...
Where conduits enter a floor-standing switchboard or panelboard at the bottom, the conduits including their end fittings, shall not rise more than _____ above the bottom of the enclosure. 
 
a) 6 inches 
b) 4 inches 
c) 2 inches 
d) 3 inches correct answersD: 3 inches 
Ref: 408.5 
 
When installed o...
Preview 2 out of 8 pages
Add to cartWhere conduits enter a floor-standing switchboard or panelboard at the bottom, the conduits including their end fittings, shall not rise more than _____ above the bottom of the enclosure. 
 
a) 6 inches 
b) 4 inches 
c) 2 inches 
d) 3 inches correct answersD: 3 inches 
Ref: 408.5 
 
When installed o...
An advantage of an electromagnent over a permanent magnent is that ____. correct answersAn electromagnent can be switched on and off. 
 
An excellent diffuser surface is one that ____. correct answersScatters light uniformly in all directions. 
 
Light is converted into electricity ____. correct ans...
Preview 2 out of 5 pages
Add to cartAn advantage of an electromagnent over a permanent magnent is that ____. correct answersAn electromagnent can be switched on and off. 
 
An excellent diffuser surface is one that ____. correct answersScatters light uniformly in all directions. 
 
Light is converted into electricity ____. correct ans...
1/4" correct answersThreads of drainage fittings shall be tapped as to allow _____ pitch per foot 
 
4 lbs correct answersLead used for safe pans shall not be less than ________ per square foot 
 
Copper Tube, Cast Iron, Stainless steel, ABS, PVC DWV correct answersName 3 allowable materials for th...
Preview 3 out of 25 pages
Add to cart1/4" correct answersThreads of drainage fittings shall be tapped as to allow _____ pitch per foot 
 
4 lbs correct answersLead used for safe pans shall not be less than ________ per square foot 
 
Copper Tube, Cast Iron, Stainless steel, ABS, PVC DWV correct answersName 3 allowable materials for th...
1x sold
branch circuit correct answersThat portion of a wiring system extending beyond the final overcurrent device is called the: 
Calculated load correct answersThe final sum of the computed loads, based on the minimum code requirements, is the 
Resistance correct answersAs compared to #10, a #8 wire of t...
Preview 2 out of 11 pages
Add to cartbranch circuit correct answersThat portion of a wiring system extending beyond the final overcurrent device is called the: 
Calculated load correct answersThe final sum of the computed loads, based on the minimum code requirements, is the 
Resistance correct answersAs compared to #10, a #8 wire of t...
If the cover for an underground pull box used for circuits over 600v is not locked, bolted, or screwed into place, then it must weigh equal to correct answers100 pounds 
 
The maximum total voltage droop on a branch circuit is correct answers3% 
 
the floors of vaults in contact with the earth shall...
Preview 3 out of 17 pages
Add to cartIf the cover for an underground pull box used for circuits over 600v is not locked, bolted, or screwed into place, then it must weigh equal to correct answers100 pounds 
 
The maximum total voltage droop on a branch circuit is correct answers3% 
 
the floors of vaults in contact with the earth shall...
A continuous load is a load where the maximum current is expected to continue for at least how long? correct answers3 hours 
 
How many amperes does a 3-hp, 240-volt, 3-phase motor draw if the 
motor has values of 90% efficiency and 95% power factor? correct answers6.3 amperes 
 
Approximately how m...
Preview 2 out of 12 pages
Add to cartA continuous load is a load where the maximum current is expected to continue for at least how long? correct answers3 hours 
 
How many amperes does a 3-hp, 240-volt, 3-phase motor draw if the 
motor has values of 90% efficiency and 95% power factor? correct answers6.3 amperes 
 
Approximately how m...
What is the preferred method to communicate with the instructor for the ELEC 070 Electrical Codes I class? correct answersEmail 
 
Which code book is required for this class? correct answersNational Electrical Code 2017 
 
The final examination is what percentage of the overall grade? correct answer...
Preview 1 out of 4 pages
Add to cartWhat is the preferred method to communicate with the instructor for the ELEC 070 Electrical Codes I class? correct answersEmail 
 
Which code book is required for this class? correct answersNational Electrical Code 2017 
 
The final examination is what percentage of the overall grade? correct answer...
Type ____ is multiconductor cable identified for use as underground service entrance cable. correct answersType USE cable 
 
Knife switch rated for more than 1200 Amps at 250Volts or less correct answersCan be used only as isolating switch, shall not be opened under load 
 
Track lighting with outle...
Preview 3 out of 24 pages
Add to cartType ____ is multiconductor cable identified for use as underground service entrance cable. correct answersType USE cable 
 
Knife switch rated for more than 1200 Amps at 250Volts or less correct answersCan be used only as isolating switch, shall not be opened under load 
 
Track lighting with outle...
What fahrenheit tempature would a transformer have to be 55% centigrade above ambrient of 98* F? correct answers55x1.8=99 + 32 = 131*F 
131 + 98= 229* 
 
A conductor is pulled to what tension? correct answers50% 
 
To dead end three 2/0 HD conductors which have a breaking strength of 5,927 lbs each ...
Preview 2 out of 5 pages
Add to cartWhat fahrenheit tempature would a transformer have to be 55% centigrade above ambrient of 98* F? correct answers55x1.8=99 + 32 = 131*F 
131 + 98= 229* 
 
A conductor is pulled to what tension? correct answers50% 
 
To dead end three 2/0 HD conductors which have a breaking strength of 5,927 lbs each ...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller QUILLSKY. Stuvia facilitates payment to the seller.
No, you only buy these notes for $33.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
81989 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now