Bundle for NCCCO Exams Compilation | Verified | Guaranteed Success

Which OSHA regulation applies to crane in construction industry? - 1926.1400 Which OSHA regulation applies to cranes used in general industry? - 1910.180 Which ANSI/ ASME standard applies to the use of mobile cranes? - ANSI/ASME B30.5 Which OSHA regulation applies to mobile cranes using a personn...

What is the max included angle for a shackle? - 120 Degrees Wire rope clips and wedge sockets shall be designed to have a minimum connection efficiency of? - 80 % The center of gravity location of a load may _________of the load - Not be located on the actual physical body A sling that is rigge...

Crane configuration includes: A. reeving, boom length, counterweight, on outriggers, on rubbers, extensions or jibs stowed or mounted, off sets, wire rope type or construction B. hoist drum speeds, line pull, wire rope size and rigging C. load charts, LMI, axle weights and center of gravity D. ...

As you boom, down the leverage of the load on the crane will: - Increase According to B30.5, a crane operator shall have a physical examination - Every three years Most manufactures require the crane to be level within? - 1 percent According to OSHA 1926.1411, when traveling a crane under a power...

Unless the manufacture states otherwise, the net capacity of a crane is the capacity listed in the load chart? - Minus the weight of the rigging and all attachments When installing wire rope cable clamps (clips), the saddle of the clamp must be - Applied to the live side Compacted clay has a gro...

1. What action does a signal person intend the operator to perform if he extends his arm at shoulder height, makes a fist with his hand, and sticks his/her thumb up? a. Boom down b. Swing c. Boom up d. Extend boom - c. 2. When hoisting personnel, within what percentage of level must a telescop...

Where is the best location for leveling a crane? - Upperworks When determining the "gross load" the best method is: - Get an accurate load weight and add the rigging. By order of hitch strength, which is the correct answer? - Basket, vertical, choker What is the purpose of using a jib? - Incre...

Which area do truck cranes without a 5th outrigger generally have no lifting capacity unless the manufacturer states otherwise? - The front What is the definition of "operating radius?" - The distance from the center of rotation of the crane to the center of gravity of the load What applies to...

When making a multiple crane lift, it is important for the operator to understand that: - The weight may increase if the other crane lands the load If a crane is not set-up level and the operator swings a load from the high side to the low side, the load radius will: - Increase Most crane manufa...