Package deal
NCCER BUNDLED EXAMS MULTIPLE VERSIONS (MODULE 1-10) QUESTIONS AND ANSWERS (2022/2023) (ALREADY PASSED)
NCCER BUNDLED EXAMS MULTIPLE VERSIONS (MODULE 1-10) QUESTIONS AND ANSWERS (2022/2023) (ALREADY PASSED)
[Show more]NCCER BUNDLED EXAMS MULTIPLE VERSIONS (MODULE 1-10) QUESTIONS AND ANSWERS (2022/2023) (ALREADY PASSED)
[Show more]1x sold
NCCER Module 9 Introduction to Materials Handling Already Passed What is the proper procedure to lift objects? Lift with your legs, keep your back straight, and keep your head up. 
In order to work with motorized materials-handling equipment, you must be? trained, certified, and authorized 
Before a...
Preview 1 out of 3 pages
Add to cartNCCER Module 9 Introduction to Materials Handling Already Passed What is the proper procedure to lift objects? Lift with your legs, keep your back straight, and keep your head up. 
In order to work with motorized materials-handling equipment, you must be? trained, certified, and authorized 
Before a...
NCCER Module 8 (employability skills) Questions and Answers Graded A a companies documented philosophy is called its? mission statement 
the time to learn about a potential employer is? before an application is ever submitted 
when preparing a resume, you should? format your resume chronologically 
...
Preview 1 out of 3 pages
Add to cartNCCER Module 8 (employability skills) Questions and Answers Graded A a companies documented philosophy is called its? mission statement 
the time to learn about a potential employer is? before an application is ever submitted 
when preparing a resume, you should? format your resume chronologically 
...
NCCER Module 4 (Power tools) Questions and Answers 100% Verified when using power tools, never engage the? trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? make sure it is disconnected from its source or energy 
most hammer drills will not hammer until press...
Preview 1 out of 3 pages
Add to cartNCCER Module 4 (Power tools) Questions and Answers 100% Verified when using power tools, never engage the? trigger lock. 
before replacing parts such as bits, blades or disks on any tool, you must? make sure it is disconnected from its source or energy 
most hammer drills will not hammer until press...
NCCER Module 2 Review Questions with Certified Answers 
1. The number matching the words "two thousand, six hundred eighty-nine" is 
a. 2,286 
b. 2,689 
c. 6,289 d. 20,689 b. 2,689 
2. A bricklayer lays 649 bricks the first day, 
632 the second day, and 478 the third day. During the three-day peri...
Preview 2 out of 11 pages
Add to cartNCCER Module 2 Review Questions with Certified Answers 
1. The number matching the words "two thousand, six hundred eighty-nine" is 
a. 2,286 
b. 2,689 
c. 6,289 d. 20,689 b. 2,689 
2. A bricklayer lays 649 bricks the first day, 
632 the second day, and 478 the third day. During the three-day peri...
NCCER study guide Module 1 Basic Safety Questions and Answers Already Passed Companies with strong safety cultures usually have lower _ . turnover 
Safety is a learned behavior and attitude. T/F TRUE 
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. unsafe cond...
Preview 2 out of 5 pages
Add to cartNCCER study guide Module 1 Basic Safety Questions and Answers Already Passed Companies with strong safety cultures usually have lower _ . turnover 
Safety is a learned behavior and attitude. T/F TRUE 
Poor lighting, excessive noise, inadequate guards for moving parts are examples of _ _. unsafe cond...
NCCER module 1 questions and answers graded A What are benefits of safety Lower accident rates less turnover 
Arc welding safety Gas welding and burning requires the use of a filter lens of not less than No. 4 shade 
Safety A learned behavior and attitude 
Safety culture A safety culture is created ...
Preview 2 out of 7 pages
Add to cartNCCER module 1 questions and answers graded A What are benefits of safety Lower accident rates less turnover 
Arc welding safety Gas welding and burning requires the use of a filter lens of not less than No. 4 shade 
Safety A learned behavior and attitude 
Safety culture A safety culture is created ...
NCCER Core Module 3 Exam Questions and Answers (2022/2023) (Verified Solutions) Another name for a machinist hammer is a Ball-peen hammer 
A heavy duty tool used to drive post or other large stakes is a Sledge hammer 
The proper angle for the edge of a cold chisel 60 degrees 
A Reed and Prince screw...
Preview 1 out of 4 pages
Add to cartNCCER Core Module 3 Exam Questions and Answers (2022/2023) (Verified Solutions) Another name for a machinist hammer is a Ball-peen hammer 
A heavy duty tool used to drive post or other large stakes is a Sledge hammer 
The proper angle for the edge of a cold chisel 60 degrees 
A Reed and Prince screw...
NCCER Module 5 TEST Construction Drawings Questions and Answers 100% Pass Plans used for work that has to do with construction in or on the earth are called Civil Plans 
The material used for the walls would be found in the? Structural Plans 
Information in a drawings title block identifies the proj...
Preview 1 out of 3 pages
Add to cartNCCER Module 5 TEST Construction Drawings Questions and Answers 100% Pass Plans used for work that has to do with construction in or on the earth are called Civil Plans 
The material used for the walls would be found in the? Structural Plans 
Information in a drawings title block identifies the proj...
4x sold
NCCER Module 4 Intro to power tools Questions and Answers with Verified Solutions 
A saw that has a thin one-piece blade that runs around guides, that runs around either end of the saw is a Band saw 
A power miter saw combines a miter box with a Circular saw 
An angle grinder is used to grind Hard h...
Preview 2 out of 5 pages
Add to cartNCCER Module 4 Intro to power tools Questions and Answers with Verified Solutions 
A saw that has a thin one-piece blade that runs around guides, that runs around either end of the saw is a Band saw 
A power miter saw combines a miter box with a Circular saw 
An angle grinder is used to grind Hard h...
NCCER Module 1 (safety) Questions and Answers Graded A companies with strong safety cultures usually have lower? incident and accident rates 
what is a statement regarding safety? it's a learned behavior and attitude 
poor lighting, excessive noise, and inadequate guards for moving parts are exampl...
Preview 2 out of 5 pages
Add to cartNCCER Module 1 (safety) Questions and Answers Graded A companies with strong safety cultures usually have lower? incident and accident rates 
what is a statement regarding safety? it's a learned behavior and attitude 
poor lighting, excessive noise, and inadequate guards for moving parts are exampl...
NCCER Module 3 (Hand Tools) Questions and Answers Graded A what is another name for a machinist hammer? Ball-peen hammer 
a heavy duty tool used to drive posts or other large stakes is called a? Sledgehammer 
what is the proper angle for the edge of a cold chisel? 60- degrees 
what types of screw co...
Preview 1 out of 3 pages
Add to cartNCCER Module 3 (Hand Tools) Questions and Answers Graded A what is another name for a machinist hammer? Ball-peen hammer 
a heavy duty tool used to drive posts or other large stakes is called a? Sledgehammer 
what is the proper angle for the edge of a cold chisel? 60- degrees 
what types of screw co...
1x sold
NCCER Core Module 1 Questions and Answers Already Passed Companies with strong safety cultures usually have lower? Turnover 
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of unsafe conditions 
The activity that consists of breaking a job into its component tasks...
Preview 2 out of 6 pages
Add to cartNCCER Core Module 1 Questions and Answers Already Passed Companies with strong safety cultures usually have lower? Turnover 
Poor lighting, excessive noise, and inadequate guards for moving parts are examples of unsafe conditions 
The activity that consists of breaking a job into its component tasks...
NCCER Module 4 Review Questions and Answers 100% Pass 
1. Pneumatic tools get their power from a. air pressure b. fluid pressure c. hand pumps d. AC power sources a. air pressure 
2. The most common use of the power drill is to a. cut wood, metal, and plastic b. drive nails into wood, metal, and pla...
Preview 2 out of 5 pages
Add to cartNCCER Module 4 Review Questions and Answers 100% Pass 
1. Pneumatic tools get their power from a. air pressure b. fluid pressure c. hand pumps d. AC power sources a. air pressure 
2. The most common use of the power drill is to a. cut wood, metal, and plastic b. drive nails into wood, metal, and pla...
1x sold
NCCER module 6 (intro to basic rigging) Questions and Answers Rated A the max load weight that a sling is designed to carry is the? rated capacity 
most alloy steel chain slings can be used in Temps up to? 500°F (260°c) 
when a tattle tail has been pulled into the jacket of a synthetic sling, the ...
Preview 1 out of 2 pages
Add to cartNCCER module 6 (intro to basic rigging) Questions and Answers Rated A the max load weight that a sling is designed to carry is the? rated capacity 
most alloy steel chain slings can be used in Temps up to? 500°F (260°c) 
when a tattle tail has been pulled into the jacket of a synthetic sling, the ...
NCCER MODULE 7 (Basic communication skills) Already Passed in the study of communication, noise is best described as? anything that interferes with a message being heard or understood 
folding your arms in front of you makes it seem as if you are? distant/unwilling to talk 
if someone does not under...
Preview 1 out of 2 pages
Add to cartNCCER MODULE 7 (Basic communication skills) Already Passed in the study of communication, noise is best described as? anything that interferes with a message being heard or understood 
folding your arms in front of you makes it seem as if you are? distant/unwilling to talk 
if someone does not under...
NCCER Module 8 Basic Employability Skills Questions and Answers Rated A 
If you see a potential source of delay on a project, notify your __________immediately. supervisor 
The way you speak, act, and interact is called self-___________. presentation 
Being _____________ means showing up for work on...
Preview 1 out of 3 pages
Add to cartNCCER Module 8 Basic Employability Skills Questions and Answers Rated A 
If you see a potential source of delay on a project, notify your __________immediately. supervisor 
The way you speak, act, and interact is called self-___________. presentation 
Being _____________ means showing up for work on...
NCCER Module 8: Basic Employability Skills Questions and Answers 100% Pass The way a person dresses, speaks, acts, and interacts with others Self-presentation 
A company's documented philosophy is called its: Mission statement. 
The time to learn about a potential employer is: Before the applicatio...
Preview 1 out of 3 pages
Add to cartNCCER Module 8: Basic Employability Skills Questions and Answers 100% Pass The way a person dresses, speaks, acts, and interacts with others Self-presentation 
A company's documented philosophy is called its: Mission statement. 
The time to learn about a potential employer is: Before the applicatio...
1x sold
NCCER Electrical 1 Module 10 Questions and Answers Graded A Blue Prints An exact copy of reproduction of an original drawing 
Floor plan As viewed from above 
Site plan Location of building on the property 
Surveys show All property lines, existing public utilities and their location on or near the ...
Preview 2 out of 6 pages
Add to cartNCCER Electrical 1 Module 10 Questions and Answers Graded A Blue Prints An exact copy of reproduction of an original drawing 
Floor plan As viewed from above 
Site plan Location of building on the property 
Surveys show All property lines, existing public utilities and their location on or near the ...
NCCER Level 1 Module 10 Basic Electrical Construction Drawings Already Passed A cutaway view of a building or object is known as a(n)______. Sectional drawing 
What is the total connected load of Circuit A-1 if each of the Type C lighting fixtures in the figure above has a total lamp and ballast loa...
Preview 2 out of 6 pages
Add to cartNCCER Level 1 Module 10 Basic Electrical Construction Drawings Already Passed A cutaway view of a building or object is known as a(n)______. Sectional drawing 
What is the total connected load of Circuit A-1 if each of the Type C lighting fixtures in the figure above has a total lamp and ballast loa...
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Stuvia is a marketplace, so you are not buying this document from us, but from seller BrilliantScores. Stuvia facilitates payment to the seller.
No, you only buy these notes for $23.49. You're not tied to anything after your purchase.
4.6 stars on Google & Trustpilot (+1000 reviews)
83662 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now