Woodshop safety stuvia - Study guides, Class notes & Summaries

Safety instructions must be given before you are allowed to work on or operate any machine or _______ - ANSWER-tool you are not permitted to work on any equipment or machine if the ______ is not present - ANSWER-instructor guards and safety device must be on all machines during _____ - ANSWER-operation machinery must not be oiled or adjusted while in ____ - ANSWER-use a machine must be started and stopped only by the _____ - ANSWER-operator do not leave a machine while it is _____ - ANSWER-runni...

it is important to wear proper eye protection - ANSWER-At all times,any time you are in the shop When lifting heavy objects it is important that you lift with the - ANSWER-Leg muscles Checking the sharpness of any tool should be done using - ANSWER-Paper or wood "HORSEPLAY" in the shop - ANSWER-Is forbidden at all time and can result in your immediate dismissal Why is it safe to use sharp tools - ANSWER-Less force is need to do the job Rags which are covered with e,or other chemicals should be...

What mark appears on the frame of industrial quality safety glasses? - ANSWER-Z87 Under what circumstance would your hearing most likely be in danger? - ANSWER-A load noise for a short amount of time What are 4 types of potential shop hazards? - ANSWER-Mechanical, electrical, chemical, and fire Many tools have sharp edges, also know as what? - ANSWER-Pinch points What hazards may appear in a cluttered shop? - ANSWER-A tripping hazard and it may black safety exits What type of fire extinguishers ...

1) In case you receive an injury in the shop, report it at once to your _____ - ANSWER Teacher 2) If the instructor is out of the room, all power machines must be _____ - ANSWER Off 3) All "special" machine setups (re-sawing, redoing, plowing, grooving and tapering) must be checked by the instructor before turning on the _____ - ANSWER Power 4) Adjustments on all power machines should be made before turning on the _____ - ANSWER Power 5) Scraps of lumber must be cleared away from a...

Name the machine used to cut lumber parallel to the grain - ANSWER-Table saw Where should the saw be before starting a cut on the radial arm saw? - ANSWER-Behind the fence Where should your hands be and what should they be doing while making a crosscut on the radial arm saw? - ANSWER-Your hands should never be in the path of the blade, while making a cut your left hand should hold the stock firmly against the fence at least 6 inches from the blade. Your right hand will pull the motor and blade f...

Name person related general causes of accidents - ANSWER-1) carelessness 2) rushing 3) fatigue 4) improper body position 5) improper clothing Name object related general causes of accidents - ANSWER-1) dull tool 2) improperly set tool 3) wrong material What should you not do when others are using machines? - ANSWER-startling, crowding, or hurrying others Name specific things that you MUST do while using machine? - ANSWER-1) stop machinery for adjustments and measurements 2) replace guard after r...

Woodshop Safety Test 100% accurate Router - ANSWER Used for edge profiling. Power Drill - ANSWER Used for drilling holes and setting screws. Table Saw - ANSWER Used to rip wood. Miter Saw - ANSWER Used for cross cuts and finish cuts.

My Woodshop Safety tesName the machine used to cut lumber parallel to the grain - ANSWER Table saw Where should the saw be before starting a cut on the radial arm saw? - ANSWER Behind the fence Where should your hands be and what should they be doing while making a crosscut on the radial arm saw? - ANSWER Your hands should never be in the path of the blade, while making a cut your left hand should hold the stock firmly against the fence at least 6 inches from the blade. Your right hand wil...

Name person related general causes of accidents - ANSWER-1) carelessness 2) rushing 3) fatigue 4) improper body position 5) improper clothing Name object related general causes of accidents - ANSWER-1) dull tool 2) improperly set tool 3) wrong material What should you not do when others are using machines? - ANSWER-startling, crowding, or hurrying others Name specific things that you MUST do while using machine? - ANSWER-1) stop machinery for adjustments and measurements 2) replace guard after r...

Attitude - ANSWER-Horseplay will not be tolerated. This is evidence of poor safety attitude. Keep your mind on your work. Respect the rights of others and their property. Clothing and Protective Equipment - ANSWER-Wearing jewelry or loose clothes in the lab is dangerous. Long hair should be tied back or worn under a cap to avoid getting it caught in the machinery. Covered toe shoes or boots with rubber soles should be worn. Always wear proper eye protection when working in the shop or with power...