Woodshop test - Study guides, Class notes & Summaries

never grab the ___________ to up tighten the bit when changing ~ sandpaper used to sand straight or curved edges on your board ~ belt sander always run the _______ system when using sanders ~ vacuum only sand on the ______ side of the sander, never the backside ~ front the size of a belt sander is determined by the size of its _____. ours happens to be _____ inch belt ~ belt, 6x80 always be careful to keep ______ away from the belt or spindle. also watch out for your fingers _...

Woodshop Test with Complete Solutions 4 inches Correct answer maintain a _____ margin of safety from the blade, This means that you must keep your hands _______ away from the saw blade. safety glasses Correct answer wear ______ proper Correct answer keep the blade guard in the ______ position at all times firmly, fence Correct answer hold stock ____ on the table and against the ____ so it does not shift or kick out when using the miter saw complete stop Correct answer after making a cu...

A blade will ____ if forced to cut too fast ~ Break Turn the switch off immediately when a blade ~ Binds or bends The radial arm saw is not used for ~ Ripping Wood should be held solidly against the ~ Fence When crosscutting bowed lumber, keep the crown to the face and down on the pavement to prevent ~ Bucking Before changing cutters or changing the clearance of the cutter, disconnect the ~ Power Ask the instructor to approve any changes in ~ Set up The guide must hold the...

WOODSHOP TEST QUESTIONS AND ANSWERS

WOODSHOP TEST QUESTIONS AND ANSWERS

Woodshop Test UPDATED Exam Questions and CORRECT Answers 4 inches - Correct Answer- maintain a _____ margin of safety from the blade, This means that you must keep your hands _______ away from the saw blade. safety glasses - Correct Answer- wear ______ proper - Correct Answer- keep the blade guard in the ______ position at all times firmly, fence - Correct Answer- hold stock ____ on the table and against the ____ so it does not shift or kick out when using the miter saw

Woodshop Test; Questions and Answers 100% Solved Safety instructions must be given before allowed to work/operate on any machine or Correct answer Tool You're not permitted to work on any equipment/machine if the instructor is not Correct answer Present Guards and safety devices must be on all machines during Correct answer Operation Machinery must not be oiled or adjusted while in Correct answer Use A machine must be started and stopped only by the Correct answer Operator Do not l...

Woodshop Test; Questions and Answers 100% Solved of the following steps used to square a board, which step is first? A. Joint a working edge B. Rip to width C. Cut one end square D. Cut to length Correct answer A. Joint a working edge Which joint is most commonly used on the corners of a picture frame? A. Miter B. Butt C. Dado D. Dowel Correct answer A. Mite