Vhf very high frequency - Study guides, Class notes & Summaries

BNSF Telecom 1 Exam Questions with Correct Answers VHF - Low and High range Very High Frequency - Answer-Low is 30 to 50 MHz High is 150 to 300 MHz UHF - Ultra High Frequency - Answer-300 MHz - 3 GHz Super High Frequency - SHF - Answer-3-30 GHz Extremely High Frequency - EHF - Answer-30-300 GHz Legacy Band - Answer-25 kHz wide channel Very Narrowband - Answer-6.25 kHz wide, digital Narrowband - Answer-12.5 kHz wide analog What is dB and how much power is it - Answer-dB is a de...

CETA Exam Questions And Answers VGA - ANSWER- 640 x 480 256 Colors 15 Pins SVGA - ANSWER- 800 x 600 256 Colors 15 Pins XGA - ANSWER- 1024 x 768 or 1366 x 768 16 mil, HD Colors 15 Pins Widescreen - ANSWER- 1280 x 720 or 1920 x 1080 DVI or HDMI Connectors Random Access Memory - ANSWER- RAM Read Only Memory - ANSWER- ROM Programmable Read Only Memory - ANSWER- PROM Electrical Programmable Read Only Memory - ANSWER- EPROM Electrically Erasable PROM - ANSWER- EEPROM 50 Ohms - ANSWE...

BNSF Telecom 1 Exam Questions with Correct Answers VHF - Low and High range Very High Frequency - Answer-Low is 30 to 50 MHz High is 150 to 300 MHz UHF - Ultra High Frequency - Answer-300 MHz - 3 GHz Super High Frequency - SHF - Answer-3-30 GHz Extremely High Frequency - EHF - Answer-30-300 GHz Legacy Band - Answer-25 kHz wide channel Very Narrowband - Answer-6.25 kHz wide, digital Narrowband - Answer-12.5 kHz wide analog What is dB and how much power is it - Answer-dB...

RCDD Practice Test Questions And Answers Graded A+ 2024/25. C - correct answer. If the input signal power to a communication system is 1 W and the output power is 1 mW, the system attenuation is: A. 3 dB B. 20 dB C. 30 dB D. 40 dB E. 1000 dB B - correct answer. The signal at the input to a balanced twisted pair cable is 10 mW. The cable is 1000 feet long and has an attenuation of 1 dB per 100 feet. This cable is connected to the input of a receiver. The noise level at th...

RCDD Practice Test Questions And Answers 100% Solved C - answerIf the input signal power to a communication system is 1 W and the output power is 1 mW, the system attenuation is: A. 3 dB B. 20 dB C. 30 dB D. 40 dB E. 1000 dB B - answerThe signal at the input to a balanced twisted pair cable is 10 mW. The cable is 1000 feet long and has an attenuation of 1 dB per 100 feet. This cable is connected to the input of a receiver. The noise level at the input to the receiver is 1 microwatt. W...

SAR Test Actual Exam Questions and CORRECT Answers Field COmmunications - CORRECT ANSWER- Cellular - COW (Cellular on Wheels) Satellite Phones - not reliable in deep canyons, can request from state through IC Radios - Radio Frequencies often used - CORRECT ANSWER- typically on two- way radios State SAR frequencies - VHF (very high frequency) of 155.160, - 151.285 Megahertz and UHF (ultra high frequencies) 460.250 - 465.250 are authorized for SAR missions in NM

RCDD TEST QUESTIONS (TOPIC 1 - TOPIC 7) WITH VERIFIED ANSWERS 2024/2025 If the input signal power to a communication system is 1 W and the output power is 1 mW, the system attenuation is: A. 3 dB B. 20 dB C. 30 dB D. 40 dB E. 1000 dB - answerC. 30 dB The signal at the input to a balanced twisted pair cable is 10 mW. The cable is 1000 feet long and has an attenuation of 1 dB per 100 feet. This cable is connected to the input of a receiver. The noise level at the input to the receiver ...

SUU Aviation Entrance Exam Questions with Answers SIGMET - Answer-In flight info that warns of dangerous weather NEXRAD (Next Generation Weather Radar System) - Answer-Weather map you can bring up on an EFD. CTAF (Common Traffic Advisory Frequency) - Answer-Used when the ATCT is closed or at uncontrolled airports. Its a frequency used by all air and ground vehicle which travel on runways or taxiways to be aware of each other. NOTAM - Answer-Notice to Airmen temporary info about ru...

RCDD Practice Test Questions And Answers 100% Solved C - answerIf the input signal power to a communication system is 1 W and the output power is 1 mW, the system attenuation is: A. 3 dB B. 20 dB C. 30 dB D. 40 dB E. 1000 dB B - answerThe signal at the input to a balanced twisted pair cable is 10 mW. The cable is 1000 feet long and has an attenuation of 1 dB per 100 feet. This cable is connected to the input of a receiver. The noise level at the input to the receiver is 1 microwatt. W...

GROL Element 3: Complete Study Guide and Practice Questions for General Radiotelephone Operator License The product of the readings of an AC voltmeter and AC ammeter is called: Apparent power What is the term used to express the amount electrical energy stored in an electrostatic field? Joules What formula would determine the inductive reactance of a coil if frequency and coil inductance is known? Xl=2pi(fL) What determines the strength of a magnetic field around a conductor? The am...