Epa 608 type 3 exam 2025 - Study guides, Class notes & Summaries

EPA SECTION 608 CORE (2021-2022 revision) A disposable cylinder should be reduced to what pressure before scrapping? a. 0 psig b. 20 psig c. 50 psig d. 80 psig A major system repair is being performed on a R-22 appliance. What CANNOT be done to recharge the appliance? a. Add R-22 after the repair is complete. b. Retrofit the unit to R-407C. c. Use recovered or recycled R-22 from the same owner. d. Top off the unit with R-410a. A refillable cylinder must not be filled above what ...

EPA 608 Type 3 exam with 100% Complete Solutions (Latest 2024/2025)The maximum test pressure for leak testing a low pressure centrifugal is: 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller ... A hydrostatic tube test kit is used to: determine if a tube leaks Commercial and industrial process refrigeration systems must be repaired when the leak rate exceeds ____ of the charge per year. 35% Refrigerant recovery typically start with ...

EPA 608 Type 3 exam with 100% Complete Solutions Latest 2024/2025 (Graded A+) On low pressure chillers, moisture typically enters the refrigerant system through air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller ... A hydrostatic tube test kit is used to: determine if a tube leaks Commercial and industrial process re...

EPA 608 (TYPE II) Exam |100% Correct| Question and Answer 2024/2025 When a new system has been assembled, the first thing to do is? *Ans* Pressurize the system with an inert gas & leak check. After installation of a field-piped R-410A split heat pulp, the unit should first be? *Ans* Pressurized with nitrogen then leak checked. The EPA regulations require that any appliances containing more than 50 pounds of refrigerant (except for commercial & industrial process refrigeration) must be ...

EPA 608 (TYPE II) Exam Questions and Answers | Latest Version | 2024/2025 | Already Passed When setting up a newly assembled system, what is the initial step? Introduce inert gas to pressurize the system and perform a leak test. According to EPA guidelines, appliances with refrigerant amounts exceeding 50 pounds (excluding those for commercial and industrial processes) must be fixed if the leakage rate surpasses what percentage of the total charge per year? 15% What is the minimu...

EPA 608 Type 2 Practice Exam Questions and Answers | Latest Version | 2024/2025 | Already Passed What procedures must a technician follow when recovering refrigerant from a high-pressure system? Technicians must use appropriate recovery equipment to safely extract the refrigerant, ensure that the recovery cylinder is properly labeled and free from contaminants, and follow protocols to prevent any leaks during the process. How should a technician handle refrigerants that are no...