Cwb welding b - Study guides, Class notes & Summaries

CWB Welding Inspector Level 1 Exam (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: From the welding problems identified below which one of the five does not fit the pattern established by the other four? a) Insufficient throat. b) Incorrect bevel angle. c) Loss of shielding gas. d) Improper fit up. e) Use of wrong consumable. Answer: a) Insufficient throat. Q: A 10 mm fillet weld has a nominal: a) Throat dimension of 10 mm. b) Area of ...

CWB Welding Inspector Level III Study Guide latest updated Which of the following metals has the highest thermal conductivity? (a) carbon steel (b) stainless steel (c) aluminum - ️️ (c) The Ellingham diagram (a) is a plot of thermal conductivity against temperature, (b) shows the free energy of oxide formation against temperature. (c) shows the rate of oxidation of metals against temperature. - ️️ (b) True or False? A metal with a high negative free energy of oxide formation wi...

CWB Module Exam Questions With 100% Correct Answers Latest Update 2024 Graded A+. Creating a safe working environment is strictly the responsibility of the employer? - Correct Answer-False, it the the joint responsibility of the employer and employee. WHMIS stands for: a) Workers Health Monitoring System b) Workplace Hazardous Materials Information System c) Workers for a Healthy Manufacturing Industry Society - Correct Answer-b) Workplace Hazardous Materials Information System What are ...

CWB Welding Inspector Level III Study Guide 2024/2025 With Complete Solutions. Which of the following metals has the highest thermal conductivity? (a) carbon steel (b) stainless steel (c) aluminum - Correct Answer-(c) The Ellingham diagram (a) is a plot of thermal conductivity against temperature, (b) shows the free energy of oxide formation against temperature. (c) shows the rate of oxidation of metals against temperature. - Correct Answer-(b) True or False? A metal with a high negati...

CWB | Introduction to Welding Metallurgy of Steel Test Questions And Answers During arc welding there is a zone adjacent to the weld metal that reaches high temperatures but does not melt. What is the name of this region? - ANSWER The heat affected zone Not all the heat energy produced during welding will enter the plate as heat energy. What is this phenomenon known as? - ANSWER The efficiency With manual welding the technique will influence the energy input. Of the following te...

CWB Welding Inspector Level 2 Exam (New 2023/ 2024 Update) Guide with Questions and Verified Answers_ All Modules Covered_ 100% Correct_ Graded A QUESTION Which has a "drooping" curve characteristic - CC or CV? Answer: CC QUESTION AC transformer welding power sources use a: (A) step-up transformer (B) step-down transformer Answer: (B) Step-down transformer QUESTION What is a diode used for in a welding machine? (A) To produce AC current ...

CWB Welding Inspector Level 1 Exam (Latest 2024 / 2025 Update) Questions and Verified Answers | 100% Correct | Grade A Q: From the welding problems identified below which one of the five does not fit the pattern established by the other four? a) Insufficient throat. b) Incorrect bevel angle. c) Loss of shielding gas. d) Improper fit up. e) Use of wrong consumable. Answer: a) Insufficient throat. Q: A 10 mm fillet weld has a nominal: a) Throat dimension of 10 mm. b) Area of 10 sq. mm. c) Leg size...

CWB Welding Inspector Level 1 Exam (New 2023/ 2024 Update) Questions and Verified Answers_ 100% Correct_ Graded A QUESTION For the FCAW, GMAW & SAW processes what does an increase in arc length do? a) Arc voltage does not change. b) Decreases the arc voltage drop across the arc. c) Increases the arc voltage drop across the arc. d) Amperage is increased. e) Makes no change to the amperage. Answer: c) Increases the arc voltage drop across the arc QUESTION The purpos...

CWB Level II Exam 2024/2025 (100%Verified Answers) Latest Update. What is the term used to describe the following condition of lost corrosion resistance? "When certain stainless steels are heated between 500-850° C, carbides form at the grain boundaries and cause a local depletion of chromium." (A) Oxidization (B) Increased toughness (C) Solution heat treatment (D) Sensitization - Correct Answer-(D) Sensitization Note: Also known as "carbide precipitation" -- Chromium binds to carbi...

CWB Welding Inspector Level 2 Exam Prep (Latest 2023/ 2024 Update) Questions and Verified Answers| All Modules Covered| 100% Correct| Grade A Q: In an isometric drawing, the lines (for width, length and depth) are inclined at an angle of how many degrees? Answer: 30° Q: What are the maximum number of views in an orthographic drawing? Answer: 6 Q: What are the two general classes of picture drawings? Answer: Perspective and Isometric Q: What are the...