Crane and rigging - Study guides, Class notes & Summaries

Boilermaker NCCR Test Questions And Answers Boilermaker NCCR Test 1 ft 3-3/4 in + 2 ft 1-1/16 in +5 ft 10- 7/8 in = - ANS 9 ft 3-11/16 in A 1-inch plate is to be cut. Why should an acetylene gerulator on a cutting rig not be adjusted over 15 PSI? - ANS Acetylene is unstable above this pressure A big control valve is pulled who is responsible for the rigging? - ANS Crane operator and rigger A boiler maker must have all of the following wh...

Hoisting License (full) questions and solutions What is the purpose of the 520: C.M.R. 6:00? to establish rules and regulations for the safety of the public What type of equipment requires a hoisting license? equipment that has minimum capability of hoisting the load higher than 10' feet or equipment that has the capability of lifting loads greater than 500 pounds or equipment that has capacity of the becket exceeds 1/4 cubic yard What does A.S.M.E. stand for? American Society ...

Boilermaker NCCER Question and answers 100% correct 2023/2024WHEN ARE STEEL CHAIN SLINGS RECOMMENDED? WHEN RIGGING FROM 3 PONTS A BIG CONTROL VALVE IS PULLED. WHO'S RESPONSIBLE FOR THE RIGGING? CRANE OPERATOR AND RIGGER 3) WHAT SHO

NCCCO CORE FINAL EXAM QUESTIONS AND ANSWERS LATEST UPDATE 2024/2025 (100% VERIFIED) Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - ANSWER Keeping 90 degree angle between cylinder rod and pad What is the primary purpose fir a rooster sheave or auxiliary boom point sheave? - ANSWER Separate the boom hoist lines How many randomly broken wires in a lay length must there be on a mobile cranes hoist line, before it should be removed fro...

NEIEP 200 Final Exam Version 2 (Latest 2023/ 2024 Update) Questions and Verified Answers| 100% Correct| Grade A Q: a mechanic attaches a chainfall to a hoisting beam with a beam clamp. what happens to the capacity of the hoisting beam? Answer: it is reduced to 50% of original capacity Q: you are rigging elevator equipment with a sling angle of 60 degrees. you are using a shouldered eye bolt with a tapped 1/2" diameter hole. once the shoulder is seated, what is the minimum threa...

1. A load chart range diagram can best be used to help identify:: net capacity 2. for mobile crane working at maximum radius, exceeding what percentage of the cranes capacity requires the radius to be verified?: 80% 3. the minimum depth of thread engagement for a 1/2 in eyebolt into steel object is?: 3/4 in 4. when tying knots in synthetic rope lashing, the rated load is increased by 50% ?: false 5. the size of shackle that can be used in the eye of a wire rope sling must be the wire rope...

Intermediate Rigging (BOOM VOC)What factor would you apply in determining the minimum capacity requirement for cranes, slings etc for use in a dual crane lift? - correct answer 20% reduction for each crane When using more than one crane for a lift, how many crane motions would you direct at any one time? - correct answer One When rotating a load using two cranes, how much weight must the primary crane be capable of carrying? - correct answer 100% of the load Is a person with a basic ...

Advanced rigging test 2 Questions with CompleteSolutions 1) What is meant by the term "two blocking - Correct Answer The load block contacts the boom point sheaves. 2) lifting 20,000lbs, with a 2-leg bridle sling at a 30 horizontal sling angle, what is force applied to each leg? - Correct Answer 20,000 3) In multiple crane lifts using an equalizer beam, the weight of the beam should be considered: - Correct Answer Part of the load weight 4) What is required if there is a deviation in ...

Boilermaker test UPS Exam Questions And Answers When working on an exchanger tube side hydro test, the - ANS CHANNEL HEAD How many bolts need to be removed from a 12 bolt flange when installing gasket? - ANS 5 One of the main factors to consider when installing an orifice plate is: - ANS Direction of flow When cutting a stud bolt, which end of the bolt should be saved? - ANS - STAMPED - STENCILED - MARKED The method of pulling and rigging out an exchanger bundle witho...

Which of the following OSHA regulations govern suspended personnel platforms? correct answers OSHA 1926.1431 According to ASME B30.3 The prohibited zone for power lines that are 60 kV is correct answers 15 ft According to ASME B30.3, load hoist rotation resistant wire rope has a design factor of correct answers 5 to 1 According to ASME B30.3 when Lifting a suspended personnel platform design factor for the rigging hardware is correct answers 5 to 1 According to ASME B30.3 Load hoist ...

Crane And Rigging Safety Guide