Class b fire extinguisher - Study guides, Class notes & Summaries

NFPA 10 Exam 99 Questions with Verified Answers (SI) - CORRECT ANSWER International System of Units 1 in=. mm - CORRECT ANSWER 25.4 Approved - CORRECT ANSWER Acceptable to the authority having jurisdiction. (AHJ) - CORRECT ANSWER Authority Having Jurisdiction O rganization, office or individual responsible for enforcing requirements of a code or standard, or for approving equipment, materials, an installation or procedure. Shall - CORRECT ANSWER Indicates a mandatory requirement....

NFPA 10 Exam 71 Questions with Verified Answers When should wheeled fire extinguishers be considered? - CORRECT ANSWER • High hazard areas are present. • Limited available personnel are present. Requiring: High agent flow rate, Increased agent stream range, increased agent capacity NON-DOT low pressure fire extinguisher cylinders that pass a hydrostatic test shall have the following recorded on a label: - CORRECT ANSWER • Month and year test was performed (perforated) • Test pre...

F80 Exam Questions and Answers Graded A After what date was the F-24 certificate of Fitness not recognized. July 31, 2014 How often must this certificate be renewed? Every 3 years In what types of buildings and occupancies are coordinators of fire safety and alarm systems in homeless shelter required? Homeless shelters, one-way voice communication systems, or occupied for more tha n fifteen persons for a period of more than 30 days. What is the certificate of occupancy? Determines the number ...

Clean Agent ANS: - Electrically non-conducting, volatile, or gaseous fire extinguishant that does not leave a residue upon evaporation. High-Pressure Cylinder ANS: - containing nitrogen, compressed air, carbon dioxide, or other gases at a pressure higher than 500 psi (3447 kPa) at 70°F (21°C). Low-Pressure Cylinder ANS: - containing fire- extinguishing agent (medium), nitrogen, compressed air, or other compressed gases at a service pressure of 500 psi (3447 kPa) or lower at 70°...

Test Bank for Patient Care in Radiography 10th Edition by Ehrlich d. Rescue, Alarm, Contain, Evacuate. ANS: D REF: p. 124 OBJ: 2 13. The acronym RACE is a helpful way to remember: a. the basic principles of body mechanics. b. the steps for using a fire extinguisher. c. the steps to follow in the event of a fire. d. the steps involved in cleaning up a hazardous spill. ANS: C REF: p. 124 OBJ: 2 14. What type(s) of musculoskeletal disorder(s) is/are more likely to occu...

NFPA 10 Questions and Answers Graded A+ Examples of extinguishers for protecting class B hazards are A. aqueous film forming foam B. Carbon dioxide c.Wet chemical d. A and B only E. all the above D. A and B only A church is classified as what type of hazard? A. light(low) hazard B.Ordinary(moderate) hazard C. Extra(high) hazard D. Special(unusual) hazard A. Light hazard A parking garage is classified as what type of hazard? A. light(low) hazard B.Ordinary(moderate) hazar...

IFSTA Chapter 6 & 7 Exam | Questions and Verified Answers| 100% Correct Q: When an extinguishing agent is determined to be safe and effective for use on combustible metals, it will: A) include the test results on the face plate B) include application instructions on the faceplate C) be given a numerical rating based upon the amount of fire it can extinguish D) be a different color than extinguishers designed to extinguish other classes of fire Answer: B) include application instruc...

Halon/BRX Fire Extinguisher Correct Answer-Used for A, B, and C fires. With hose, lasts 12 seconds. Without hose, lasts 8 seconds. Protective Breathing Equipment (PBE) Correct Answer-Oxygen duration is 15 minutes. Blinking green light indicates that oxygen is still flowing. Alternating green/red light indicates it is time to vacate the scene before oxygen runs out. Water Fire Extinguisher Correct Answer-Should only be used on class A fires or on PEDs. Contains an antifreeze additive which ...

Seattle FEX-1 Starter Exam Questions and Answers 2024/2025 Solved 100% What type of test is necessary on a Co2 hose before installation? - answerConductivity What is the maximum travel distance for a Class B fire extinguisher? (Light hazard, Ordinary Hazard, Extra Hazard) - answer50', 50', 50' Administrative Rating 9.01.04 states that ________ are to be followed. - answerNationally recognized standards A 10 Ft sq. heptane tank should have a ______ rated extinguisher protecting it. - a...

A three dimensional fire often involves static flammable liquid. true or false - ans ---false. 3D firess unvolve flammable liquid in motion as well as both horizontal and vertical surfaces. Class A fire extinguisher - ans ---are ok for wood, paper, some plastics and textiles. They offer the coating effects of dry chemicals. Dry chemical stored pressure fire extinguishers: - ans ---should be removed or replaced at their next 6 year maintenance or hydrostatic test interval. B:...