Ase a5 practice exam 2024 - Study guides, Class notes & Summaries

ASE A5 PRACTICE EXAM 2024 WITH 100% CORRECT ANSWERS A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - correct answer TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clic...

ASE A5 PRACTICE TEST EXAM 2024 WITH 100% CORRECT ANSWERS 1. On a car with disc/drum brakes, the front brakes grab quickly when light pedal pressure is applied. This problem could be caused by a bad: A. proportioning valve B. pressure safety switch C. metering valve D. residual check valve - correct answer C 2. The driver of a vehicle with power disc/drum brakes says that the brake pedal moves slowly to the floor while maintaining pedal pressure at a stoplight. What could cause thi...

ASE A5 ACTUAL EXAM (PRACTICE TEST) (BRAKES) EXAM QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED A+

ASE Brakes A5 ( Exam 3 ) Practice Questions and Answers The goal of burnishing the brakes after a complete brake service is to: a. heat the brake assembly b. cool the brake assembly c. set the wheel assembly d. stretch the brake shoes - Ans:-A : heat the brake assembly why : the brake assemblies are intentionally allowed to get heated during burnishing. this allows the braking materials to cure Refer to the figure ( pg. 67 ) : the internal spring in the wheel cylinder is left out during...

ASE A5 Practice Test Brakes Study Exam Questions and Answers A vehicle with ABS anti-lock brakes has an audible clicking noise when it is first started. The noise goes away after a few seconds. Technician A says this is one of the hydraulic valves in the hydraulic valve assembly sticking. Technician B says this is a normal condition. Who is correct? - Ans:-TECH B is correct. The ABS system runs a system check when the key is first turned to the ON position. The valves sometimes make a clic...

ASE A5 ACTUAL EXAM (PRACTICE TEST) (BRAKES) EXAM QUESTIONS AND CORRECT VERIFIED ANSWERS ALREADY GRADED A+

ASE A5 Brakes Practice Test -Section 1- Hydraulic System DIagnosis and Repair Exam Questions and Answers A spongy brake pedal may be caused by: - Ans:-Air in the hydraulic system d - Air causes a gap in the hydraulic fluid flow because the fluid has to compress the air before it can apply the piston. This delay causes the spongy feel. The other choices do not affect this concern. This question is not like the others. It has the word EXCEPT. For this question, look for the choice that coul...

ASE Brakes A5 Test ( Exam 2 ) Practice Questions and Answers The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Answer️️ -A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag ...

ASE (Entry level technician prep) - Brakes A5 Exam Practice Questions and Answers (100% Pass) A5 Question 1 The brake pedal is low and spongy; all brake adjustments have been completed according to specifications. The cause of the problem could be: A) Binding pedal linkage. B)Dented brake line. C)Plugged compensating port. D)A weak hydraulic hose. - Answer️️ -Answer D is correct! Binding pedal linkage would cause a hard pedal and perhaps an effective brake system. This is also tru...