Nfpa 58 exam - Study guides, Class notes & Summaries

LP Gas Master Qualifier: Gas Installation & Service Exam Questions with 100% Correct Answers 2024/2025 Where do you find (in which code book) the approved materials to be used in the venting of regulators? Chapter and Section? A. NFPA, 6.10.1.6 B. NFPA 58, 5.10.3.1 C. NFPA 54, 3.3.99.5 D. NFPA 54, 3.3.101 - answerB. NFPA 58, 5.10.3.1 Where do you find which testing needs to be performed in the installation of a new appliance into an existing system? Chapter & Section? A. NFPA 54, 8.2 ...

LP Gas Master Qualifier: Gas Installation & Service Exam Questions with 100% Correct Answers 2024/2025 Where do you find (in which code book) the approved materials to be used in the venting of regulators? Chapter and Section? A. NFPA, 6.10.1.6 B. NFPA 58, 5.10.3.1 C. NFPA 54, 3.3.99.5 D. NFPA 54, 3.3.101 - answerB. NFPA 58, 5.10.3.1 Where do you find which testing needs to be performed in the installation of a new appliance into an existing system? Chapter & Section? A. NFPA 54, 8.2 ...

CETP 4.1 Designing & Installing Exterior Vapor Distribution Systems Exam _____________ is the sum of the rated btu/hr input for each propane appliance connected to the vapor distribution system. - answerTotal gas demand Where do you record the ratings of the btu/hr input for a customers current appliances? - answerCustomer gas appliance use profile form _____________ is used to determine the amount of propane required to operate appliances at a reduced demand, and assumes full cycle happe...

LP Gas Master Qualifier Transportation of LP Gas 2024 Actual Exam In which code book deals with Vehicular Transportation of LP-Gas? A. NFPA 54 B. NFPA 58 (NFPA 58 Chapter 9) C. Both NFPA 54 & NFPA 58 D. None of the above - CORRECT ANSWER-B. NFPA 58 (NFPA 58 Chapter 9) When transporting cylinders where the total weight is more than _______ including the weight of the LP Gas and the cylinders, shall be placarded as required by DOT regulations or state law. A. 20 lb B. 100 lb C. 500 ...

NFPA 10 HYDRO-STATIC TESTING Ch.8 EXAM 58 Questions with Verified Answers Cylinders and cartridges bearing U.S. department of Transportation or transport Canada (TC) markings - CORRECT ANSWER shall be retested in accordance with the DOT or TC regulations. Hydrostatic testing shall be performed by persons who are - CORRECT ANSWER who are trained in pressures procedures and safeguards who have testing equipment, facilities, and appropriate manufacturer's service manual available Personne...

CETP 1.0: Module 6 Exam Questions And Answers All Correct Also known as NFPA 54, the __________ covers fire prevention and installation standards for fuel gasses, as well as the installation of piping and appliances for residential and commercial applications - ANS A. Liquefied Petroleum Gas Code B. American Standards National Institute C. National Fuel Gas Code D. Unfired Boiler and Pressure Vessel Code Tanks and pressure relief valves built according to the ASME code are usually mark...

LP Gas Master Qualifier: Gas Leak Detection & Corrosion Control Exam Questions with 100% Correct Answers Customer leak calls must be responded to within _______ hours. A. 12 B. 24 C. 72 D. 48 - answerB. 24 Customer leak calls must be responded to within ________ hours when emergency personnel are involved. A. 2 B. 4 C. 8 D. 1 - answerA. 2 Bar probe testing of underground LP-Gas systems is required every ________years. A. 1 B. 2 C. 3 D. 5 - answerD. 5 Inspection, Testing and Pu...

Journeymen Gas Fitter EXam Questions With Correct Answers an appliance has a demand of 180,000 btu/h. It is communicating with the outdoors through horizontal openings. what is the minimum net free area of each opening. 2,000 btu per square inch. 90 sq inch is the answer . 304.6.1 what is the minimum required distance that a connector to a mason chimney flue should be above the lowest portion of the interior chimney flue 12 inches. 501.9 minimum distance from combustible constructio...

When a round flue is used for the lining of a fireplace chimney the proper fireplace opening to flue size ratio should be: Ans- 12:1 2. When unlined the smoke chamber walls shall be what thickness: 8" 3. When the opening of the firebox is 6 square feet the extension of the hearth should be: Ans- 20 inches 4. T or F the inner surfaces of the smoke chamber shall not be inclined more than 45 degrees from vertical: Ans- True 5. A level 2 inspection inspection of accessible areas of attics ba...

Kentucky UST Certification Exam Review Questions and Verified Answers Update (100% VERIFIED) When you are lifting a tank, using the lifting lugs, which of these procedures should be followed? - correct answers attach a triangle cable through the lugs with no more than a 30 degree angle from the center line. After you unload a new tank on a clean level surface at the job site what else should you do prior to inspection and pre-testing? - correct answers Chock the tank to prevent it from Rol...