What type of wire nut - Study guides, Class notes & Summaries

Millwright - Power Transmission Exam Questions With Verified Answers 1. Calculate the accurate belt length for the following: Large diameter pulley is 11.25" and the small diameter pulley is 6.125". Shaft centers are 17.5" apart. a. 62.65" b. 62.00" c. 73.98" d. 62.28" - answera. 62.65" L=2C+1.57(D1+d2)+[(D1-d2)²/4C] L=2(17.5)+1.57(11.25+6.125)+[(11.25-6.125)²/4(17.5)] L=35+27.27875+(26.265625/70) L=62.65 2. The clearance of meshing gears of any diametral pitch is known as...

BEFO QUIZ QUESTIONS AND ANSWERS GRADED A+ Most fire departments are organized in a series of levels, with the intermediate levels made up of personnel assigned by: rank and duty Why is the division of labor necessary in the fire service? to prevent the duplication of effort Wildland firefighter which fire fighting personnel are trained specifically to extinguish fires in outdoor vegetation utility company Which organization or agency assists the fire department by shutting off natural gas li...

Flexible metal conduit is sometimes referred to as? - ANSWERSGreenfield What do you look for to determine if a switch or receptacle is acceptable for copper and aluminum wiring? - ANSWERSCO/ALR What type of receptacle should not be used with aluminum branch circuits wiring any longer? - ANSWERSCU/AL What type of wire nut is not appropriate for aluminum wire? - ANSWERSConventional What is another name for a grounding rod? - ANSWERSElectrode What is the purpose of a circuit breaker?...

Oilers Plant Tenders (HHC) Civil Service Exam 365 Questions with Verified Answers The texture of an aluminum-soap lubricating grease is _________ - CORRECT ANSWER Stringy The property of a lubricant the allows it to adhere to metallic surfaces is known as ________ - CORRECT ANSWER Oiliness The physical appearance of a grease with a consistency number of four is MOST NEARLY _________ - CORRECT ANSWER Hard The one of the following measures that is commonly used to represent a rate of...

TSSA Exam Study Questions with Correct Answers Which of the following lists best describes the key safety categories which should be considered by a fuel technician in Ontario - Answer-Personal Safety, Tools, Equipment, safety of others, site, OHSA, Ontario fuel codes What should a fuel technician do when a new piece of equipment is introduced for use - Answer-Get a copy of the user manual and read it before using the equipment What does OHSA stand for - Answer-Occupational Health and ...

What is the purpose of a sealing fitting (seal off) To minimize the passage of gas vapors and flames through a conduit. What is article 344 of NEC Will be covering RMC or Rigid metal conduit What is one characteristic of aluminum conduit? It is more resistant to wet environments. When installing EMT or electrical metallic tubing it must? be supported every 10 feet EMT is often referred as? Thin wall type conduit. A type of conduit body with a 90° connecto...

ASVAB Questions and Answers – Scored A In making permanent electronic connections, use? Soldering Iron The abbreviation AC stands for Alternating Current Restricts a currents flow to a single direction. DIODE In order to make an electric current flow, it is necessary to have an Open circuit Which of the following is a type of resistance in an AC transformer circuit? impedance A standard multimeter does NOT measure frequency When current flow is interrupted by a blown fuse, the circuit be...

CSP Lesson 10 Exam Questions with Correct Answers What is the minimum rating required for a receptacle? - Answer-15 A A single receptacle connected to a 30-ampere branch circuit must generally have a rating not less than ------ amperes. - Answer-30 Amps If 15- and 20- ampere duplex receptacles are not marked with "CO/ALR" they are suitable for use with -------. - Answer-Copper and copper-clad aluminum conductors only. Duplex receptacles are required to be installed so that the equ...

Which of the following lists best describes the key safety categories which should be considered by a fuel technician in ontario -Personal Safety, Tools, Equipment, safety of others, site, OHSA, Ontario fuel codes What should a fuel technician do when a new piece of equipment is introduced for use - Get a copy of the user manual and read it before using the equipment What does OHSA stand for - Occupational Health and safety act What type of fastener is used to join two electrical conductor...

For electrically operated in - sink waste disposers, what is the minimum and maximum length allowed for electrical cable? 18 inches- 36 inches. 422.16 (B)(1)(2) Rigid metal conduit must be securely fastened within how many feet of junction box? 3 feet. 344.30 (A) *See exceptions Brainpower Read More In a health care location where flammable anesthetics are employed, the entire area shall be considered to be a Class 1 Division 1 location that extends upward to a level of ho...