Timber or steel - Study guides, Class notes & Summaries

All corner posts, front and rear (Any single deformation such as bend, bow, dent, etc.) // Repair if - more than 20 mm (13/16 in), regardless of length or location Bottom side rails, front and door sills (Any deformation such as bend, bow, dent, etc. ON A WEB) // Repair if - More than 50 mm (2 in) deep Of the following conditions in a dry-van container, which one would require cleaning? A. Raised mud foot prints in excess of what might normally remain after a sweep out B. Dry dust covering...

COSC 153 Final Exam 2 (100% Accurate Answers). The Project Phases correct answers - Design - Pre-Construction - Procurement - Construction - Post-Construction - Owner Occupancy Phase 1 of Construction correct answers Demolition Phase 1 - Demolition correct answers - Demo of existing utilities - Demo of physical buildings - Demo of landscaping or other physical pieces - Clearance of land - Subgrade Phase 2 of Construction correct answers Excavation and Foundations (Sub-Structure) P...

LLPSD - FF1 Chapter 7 Questions and Answers Latest Updated What is the chemical change that occurs to wood when it is heated? a. Pyrolysis b. Reduction c. Cat agenesis d. Oxidation a. Pyrolsis Which type of construction is heavy timber? a. V b. III c. II d. IV d. IV 0:04 / 0:30 Which material is a component of mortar? a. Diatomaceous earth b. Lime c. Calcium sulfate d. Pea gravel b. Lime What does a CMU contain? a. thermal expansion joints b. void spac...

State the typical values for the Young's modulus of Mild Steel, Concrete, Timber and Masonry If a beam had a second moment of area (I), and was spanning a distance (L) which material property would directly influence how much it would deflect under a constant load (F)? Youngs Modulus (E) State which materials are not affected by creep and why? Masonry, generally not significant Steel, only at high temperatures State which materials are affected by creep? Timber Concr...

Which of the following defects requires repair? A. A loose door gasket B. A bent J-bar that does not affect door operation C. A dent 13mm (1/2 in) deep on the door sill D. Four dents, each 11mm (7/16 in) deep, on contiguous outboard corrugations of a roof panel -Correct Answer A. A loose door gasket Of the following conditions in a dry-van container, which one would require cleaning? A. Raised mud foot prints in excess of what might normally remain after a sweep out B. Dry d...

The International Building Code, for a building to be classified as Type IV Heavy Timber (HT) construction correct answers Wooden structural members must meet minimum size requirements and its exterior walls must be constructed of noncombustible materials. Timber frame advantages correct answers Aesthetics -cathedral ceiling -hugh glass areas -shows strength Fire resistance -better than unprotected steel Timber frame disadvantages correct answers Skill required, time consuming, high c...

COSC 153 Final Exam 2 (100% Accurate Answers). The Project Phases correct answers - Design - Pre-Construction - Procurement - Construction - Post-Construction - Owner Occupancy Phase 1 of Construction correct answers Demolition Phase 1 - Demolition correct answers - Demo of existing utilities - Demo of physical buildings - Demo of landscaping or other physical pieces - Clearance of land - Subgrade Phase 2 of Construction correct answers Excavation and Foundations (Sub-Structure) P...

IICL CONTAINER INSPECTOR’S EXAM WITH QUESTIONS AND WELL VERIFIED ANSWERS [GRADED A+] ACTUAL 100% Which of the following defects requires repair? A. A loose door gasket B. A bent J-bar that does not affect door operation C. A dent 13mm (1/2 in) deep on the door sill D. Four dents, each 11mm (7/16 in) deep, on contiguous outboard corrugations of a roof panel - ANS---A. A loose door gasket Of the following conditions in a dry-van container, which one would require cleaning? A. Raised mud fo...

Pile Driving Questions and Answers 2024 Piles can be classified on the basis of either their use or the materials from which they are made. -Answer-True Sheet piles are used primarily to create a rigid barrier for earth and water. -Answer-True Load-bearing piles are used primarily to transmit structural loads. -Answer-True The friction pile transmits the load to the soil through the pile's lower tip. -Answer-False The end-bearing pile transmits the load to the soil through skin friction b...

IICL Container Inspector's Exam Questions and Answers Already Passed Which of the following defects requires repair? A. A loose door gasket B. A bent J-bar that does not affect door operation C. A dent 13mm (1/2 in) deep on the door sill D. Four dents, each 11mm (7/16 in) deep, on contiguous outboard corrugations of a roof panel A. A loose door gasket Of the following conditions in a dry-van container, which one would require cleaning? A. Raised mud foot prints in excess of what mi...