Pumper 5 - Study guides, Class notes & Summaries

TEEX Final Questions With Revised Correct Detailed Answers Guaranteed Pass 1. What type of gloves should be warn when replacing a hot bulb? A Latex B cotton C Leather D Synthetic - ANSWER Leather 2. When should the spark plug on a electric generator be replaced? A When it is damaged B After three months of use C During routine maintenance D After five to eight months of use - ANSWER when it is damaged 3. What equipment is necessary for service testing? A...

Driver/Pumper OperatorCoefficient for 1 3/4" with 1 1/2" couplings - correct answer 15.5 Coefficient for 2" - correct answer 8 Coefficient for 2 1/2" - correct answer 2 Coefficient for 3" with 2 1/2" couplings - correct answer .8 Coefficient for 3" with 3" couplings - correct answer .677 Coefficient for 4" - correct answer .2 Coefficient for 5" - correct answer .08 FL - correct answer Friction Loss in PSI C - correct answer Friction Loss coefficient Q - corre...

The real breakthrough for today's modern fire apparatus came with the introduction of the ___________, which carried a booster tank, had a pump capacity of 250 gallons per minute or greater, and carried 2 1/2-inch and 1 1/2 inch houses used for water supply and firefighting A. Triple-combination pumper B. Articulated boom C. Tower Ladder D. Quad pumper -:- A Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be ...

Pumper CDC Questions and Answers Fully Solved A fire apparatus should be started with all electrical switches in the OFF position in order to: Start the engine without a load. During an inspection of your fire apparatus, you should ensure that the foam level is: Full Match the location of each fire apparatus inspection item to the name that applies saddle tanks - 6 winch - 7 main hose bed - 2 automatic snow chains - 4 intake strainers - 5 ladders - 3 compartments - 1 ...

1. Fire protection engineers have established PSI as a minimum re- quired residual pressure when computing the available water for flow test results. ANS 20psi 2. The most common gallonage rating for horizontal shaft pumps in use today are - GPM. ANS 500 - 1500 gpm 3. A fire pump serving a standpipe system should be tested ANS weekly 4. A fire department pumper can effectively supply around feet in a high rise building depending on hydrant pressure and other factors. ANS 450 feet 5. Cla...

IFSTA, Essentials of Firefighting: Chapter 13Supply hose - correct answer transports water or other agents from a hydrant or other source to a pumper Attack hose - correct answer Transports water or other agents at increased pressure from a pumper to nozzle(s) or FDC Fire Department Connection - correct answer FDC, Connection point into sprinkler or standpipe system to boost water flow, connection has clappered siamese 2+ 2.5 in intakes or 1 large 4 in intake Booster hose - correct answ...

PUMPER EOC QUESTIONS AND ANSWERS 100% SOLVED The benefit of an apparatus-mounted generator on a fire apparatus is that it can provide 50 kilowatts, whereas a portable generator can only produce: ️️5 kilowatts All of the following are rescue tools EXCEPT ️️drills Identify TWO items that should be included on daily fire apparatus ️️-Tire Condition -Coolant levels On the vacuum services test, the system vacuum and pump priming device should achieve a column of mercury of at ...

In 1720 what was the piece of equipment to replace the bucket brigade? Hand Pump Which NFPA standard required new fire apparatus to be designed so that all members riding on the fire apparatus would be provided a seated area inside an enclosed cab? NFPA 1500 What was the first gasoline powered fire apparatus to discharge water by using a large soda acid extinguisher? Chemical Wagon The real breakthrough for today's modern fire apparatus came with the introduction of the _______________...