Oil burner questions - Study guides, Class notes & Summaries

All heating, combustion, and cooking equipment shall be provided with insulation or the building construction shall be fire protected, so that during operation the surface of combustible construction materials will not be raised to a temperature higher than ____. 170 ̊ F Acceptance tests: Boilers shall not be placed in operation upon completion of construction until they have been ____ and an equipment use permit has been issued by the commissioner. Inspected and tested. Periodic ...

All heating, combustion, and cooking equipment shall be provided with insulation or the building construction shall be fire protected, so that during operation the surface of combustible construction materials will not be raised to a temperature higher than ____. 170 ̊F Acceptance tests: Boilers shall not be placed in operation upon completion of construction until they have been ____ and an equipment use permit has been issued by the commissioner. Inspected and tested. Periodic...

Oil Burner Questions with Correct Answers

The fill line in an oil burner system is a line used to - ANSWER Fill the storage tank with oil The aquastat is located - ANSWER Below the water line The oil storage tank - ANSWER Provides the supply of oil for combustion in the oil burner The temperature in the storage tank for # 6 oil is - ANSWER 100 and 130 degrees Fahrenheit A suction cup - ANSWER Circulates the oil throughout the system The oil strainer removes the contaminants - ANSWER From the oil before the oil reaches the...

P-99 / LOW PSI OIL BURNER OPERATOR QUESTIONS AND ANSWERS

Oil Burner Questions with Correct Answers

P-99 / LOW PSI OIL BURNER OPERATOR QUESTIONS WITH CORRECT ANSWERS

What is the first thing a tech should do when arriving at a no combustion call? - Answer- Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - Answer- -Remove any underground storage tanks. -Install a quality oil filter. -Cut the suction line 10" above the tank outlet to prevent sludge. Hot water and steam valves are interchangeable. - Answer- False When in the presence of a flame, a cad cell normally reads.. - Answe...

Oil Burner License Exam Questions and Answers (Already Graded A+)Oil Burner License Exam Questions and Answers (Already Graded A+)Oil Burner License Exam Questions and Answers (Already Graded A+)Oil Burner License Exam Questions and Answers (Already Graded A+) What is the first thing a tech should do when arriving at a no combustion call? - ANSWER-Ask how many times the customer reset the unit. What is the best long term solution for preventing a clogged nozzle? - ANSWER--Remove any undergro...

MN Boiler License Questions With Complete Solutions Graded A+ a question an answer what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's c) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high a) Necessary to burn the combustible gases whe...