C discontinuity - Study guides, Class notes & Summaries

ASNT VT Level II questions with complete solution 2024/2025B. 1. Per ASNT Section XI, NDE personnel shall be recertified: A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. 2. Per SNT-TC-1A, when an employee leaves his employer: A. his certification automatically transfers to his new employer B. his certification is automatically terminated C. he must take an exam...

ASNT VT Level II questions with complete solution 2024/2025B. 1. Per ASNT Section XI, NDE personnel shall be recertified: A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. 2. Per SNT-TC-1A, when an employee leaves his employer: A. his certification automatically transfers to his new employer B. his certification is automatically terminated C. he must take an exam...

API 653 FORMULAS EXAM QUESTIONS AND ANSWERS 100% PASS Linings- Typically anchor profile of steel surface required for the installation of a tank bottom lining 652: 7.5 - Correct Answer ️️ -1.5-4.0 mils Welds- Maximum undercut of a vertical weld & nozzle weld 650: 8.5.2.b - Correct Answer ️️ -1/64" Welds- Maximum undercut of a horizontal weld 650: 8.5.2.b - Correct Answer ️️ -1/32" Welds- Maximum diameter of a surface porosity cluster 650: 8.5.2.c - Correct Answer ️️ -3/...

1. What can cause stress risers? a. punch marks b. corrosion grooves c. corrosion pits d. all of the above - ANSWERSD 2. When a metal (or alloy) cools from a liquid to a solid state, the lack of molten metal to feed the shrinkage will lead to: a. pipes, voids and cavities b. sponge like appearance and hot tears c. none of the above d. both a and b - ANSWERSD 2. Which of the following is not a cause of undercutting? a. excessive amperage b. excessive travel speed c. excessi...

1. What can cause stress risers? a. punch marks b. corrosion grooves c. corrosion pits d. all of the above - ANSWERSD 2. When a metal (or alloy) cools from a liquid to a solid state, the lack of molten metal to feed the shrinkage will lead to: a. pipes, voids and cavities b. sponge like appearance and hot tears c. none of the above d. both a and b - ANSWERSD 2. Which of the following is not a cause of undercutting? a. excessive amperage b. excessive travel speed c. excessi...

ASNT Visual Testing Level 2 Exam Questions And Answers Solved 100% Correct!! Which of the following are typical of foreign matter which might block the openings of discontinuities if the surface of a test specimen is NOT properly cleaned? A. Paint B. Scale C Core and mold material D. All of the above D (Yes, all three foreign materials can inhibit defect detection if not carefully removed.) A large forging is repaired by welding. Visual inspection of the repair weld reveals an irregular...

ASNT VT Level II Exam (General Questions) With Complete Answers Graded A+ B. every 3 years by retraining and retesting 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. his certification is automatically terminated 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification automatically transf...

WELDING INSPECTION-STEEL (WIS 5) EXAM 9 QUESTIONS VERSION 1 TECHNOLOGY 1. During inspection of a fillet weld you notice slag in the toes of the weld. What action will you take? a. As a fillet weld does not need to be strong, slag will not be a problem b. Measure slag, if it is less than 3mm it will not be a problem c. Have the welder to remove the slag as this could mask any discontinuity d. Tell the welder to leave the slag in as it will add strength to the fillet weld 2. Which is the m...

VT Theory Questions (Level II) Questions and Answers Already Graded A Localized reduction in an area of a bolt that is under overload conditions is referred to as: a. sizing b. necking down c. erosion d. elongation b The least common location for fastener failure is: a. in the head to shank fillet b. throughout the first thread inside the nut on threaded fasteners c. in the mid grip d. at the transition from the thread to the shank c Discontinuities that are produced during the hot or ...

EMC Questions And Answers(Scored1. What can cause stress risers? a. punch marks b. corrosion grooves c. corrosion pits d. all of the above - ANSWERSD 2. When a metal (or alloy) cools from a liquid to a solid state, the lack of molten metal to feed the shrinkage will lead to: a. pipes, voids and cavities b. sponge like appearance and hot tears c. none of the above d. both a and b - ANSWERSD 2. Which of the following is not a cause of undercutting? a. excessive amperage b. ex...