Ball peen hammer - Study guides, Class notes & Summaries

Fog Master Stream - Usually operated at 100 PSI Type 1 Dozer - Heavy 200Hp (D-7,D-8) Type 2 Dozer - Medium 100Hp (D-5,D-6) Type 3 Dozer - Light 50Hp (D-4) Tensile Strength of Kern Mantle rope 5/16inch? - 4,200 lbs Types of roof collapse. - Lean-to Collapse V-shape Collapse Pancake Collapse Cantilever Collapse How many feet in a mile? - 5280 feet How many yards in a mile? - 1760 yards How many quarts of fluid do you lose in an hour? - 1-2 quarts What are the three hazard markings on a...

NCCER Module 3 (Hand Tools) Questions and Answers Graded A another name for a machinist's hammer Ans ball-peen hammer a heavy-duty tool used to drive posts or other large stakes Ans sledge hammer the proper angle for the edge of a cold chisel Ans 60 degree angle A screw that comes to a relatively sharp point at the base of its drive socket Ans reed and prince number of sides of a hexagonal shape Ans six How is a spud wrench different from a pipe wrench Ans smooth jaws t...

Module 0103-15 Introductions to hand toolsAnother name for a machinist's hammer is A. Ball-peen hammer B. Claw hammer C. Veneer hammer D. Sledgehammer A. Ball-peen hammer A heavy-duty tool used to drive posts or other large stakes is a A. Mallet B. Sledgehammer C. Bell-faced hammer D. Ball-peen hammer B. Sledgehammer The proper angle for the edges of a cold chisel is A. 90 degrees B. 60 degrees C. 45 degrees D. 30 degrees B. 60 degrees The type of screw is shaped l...

ABSA 4B Exam Questions and Answers 100% Pass Which of the following pump designs has a spiral casing with an increasing cross sectional area? 1. rotary pump 2. rotary gear pump 3. rotary lobe pump 4. reciprocating pump 5. volute pump - Answer- 5. volute pump A clear line of sight to the flame is required by a(n): 1. Flame scanner 2. Thermopile 3. Flame rod 4. Thermocouple 5. All of the above - Answer- 1. Flame scanner A ____ is installed to start a large diesel engine. 1. electric...

Preparation for disassembly is threefold: Preparation of the Firearm, Preparation of Your Workspace and Tools, and which of the following: ~~> Mental Preparation Which hammer is the workhorse of all the different hammers, capable of handling any project, large or small? ~~> Ball-Peen Hammer Which hammer is usually reserved for smaller jobs, driving smaller pins that require less force? ~~> Brass Hammer When cleaning a firearm, the second step in the process is which of th...

Adjustable Wrench - A smooth-jawed wrench with an adjustable jaw used for turning nuts and bolts. Ball-peen Hammer - A hammer with a flat face that is used to strike cold chisels and punches. The rounded end -the peen- is used to bend and shape soft metal. Bell-faced Hammer - A claw hammer with a slightly rounded, or convex, face. Bevel - To cut on a slant at an angle that is not a right angle. Box-end Wrench - A wrench, usually double-ended, that has a closed socket that fits over the head...

Hand tools Exam Questions with 100% Correct Answers Verified | Updated 2024/2025 Cable Come alongs Used to move loads over a short horizontal distance Laser Level Used for checking level over a long range like a foundation Machinist hammer Ball and Peen hammer used to bend and shape metal. Lineman's Pliers side cutters Used to cut and/or grab electrical wire Shovel handles Typically made out of wood or fiberglass. Speed Handle Device used to quickly turn a socket...

ABSA 4B Exam Questions with 100% Correct Answers 2024/2025 Which of the following pump designs has a spiral casing with an increasing cross sectional area? 1. rotary pump 2. rotary gear pump 3. rotary lobe pump 4. reciprocating pump 5. volute pump - answer5. volute pump A clear line of sight to the flame is required by a(n): 1. Flame scanner 2. Thermopile 3. Flame rod 4. Thermocouple 5. All of the above - answer1. Flame scanner A ____ is installed to start a large diesel engine. 1...

Hand Tools Exam Questions with 100% Correct Answers Verified | Updated A _______ has a steel head and a handle made of steel, wood, or fiberglass. - answerclaw hammer Another Name for a _ is a machinist's hammer. - answerball peen Ball-peen hammers are used in - answer-metalworking. -It has a flat face for striking and a round face for peening (rounding off) metal or rivets. A ___ is a heavy-duty tool used to drive posts or other large stakes. - answer_sledge hammer - ____ are demoliti...

Another name for a machinist hammer is a - Ball-peen hammer A heavy duty tool used to drive post or other large stakes is a - Sledge hammer The proper angle for the edge of a cold chisel - 60 degrees A Reed and Prince screw comes to a relatively sharp point at - the base of it's drive socket When an object is plumb it is - perfectly vertical