12 masonry - Study guides, Class notes & Summaries

The minimum crawl space ventilation required is 1 square foot per each ______ square feet of under floor space without a vapor barrier. 150 A ventilating opening within a crawl space shall be located within __________ of each corner of a building. 3 feet An access opening to a crawl space through a perimeter wall shall be a minimum size of 16" x 24" According to code, wood beams, rafters, and joists may NOT be notched in the middle 1/3 Truss design drawings shal...

12" - Answer- A foundation drain shall extend past the outside edge of the footing at least how far? 3/8" - Answer- A concrete masonry foundation wall extends below grade and will require parge coating using Portland cement mortar. What is the minimum allowable thickness? contacting the local utility companies - Answer- Which is the first step that needs to be taken prior to starting any excavation work? conducting test borings - Answer- Before excavating for a new building, how shoul...

NASCLA Accredited Exam - JJ Johnson Contractor Seminar ACTUAL EXAM QUESTIONS AND CORRECT DETAILED ANSWERS What are 4 types of Steel Decking? Composite, Roof, Cellular, and Form What are the lengths of Full sheets of Steel Decking? 12", 18", 24", 30", or 36". All are usually less than 40" Who has full responsibility for Safety on a construction site? The prime contractor Who is responsible to ensure workers have appropriate eye protection? The employer Safety belt lanyard shall ...

Exam (Elaborations) IRC Building Code |Latest Update Graded A+ In Seismic Design Categories D0, D1, and D2, _____ stone masonry walls shall not be used. Rubble R404.1.1.1 Masonry foundation walls. In Seismic Design Categories Do, D1 and D2, foundations with stem walls shall be provided with a minimum of one No. ___ bar within 12 inches of the top of the wall and one No. ___ bar located 3 to 4 inches from the bottom of the footing. #4 #4 R403.1.3.1 Foundations with stemwalls T...

RECF Civil Engineering Prep Questions with Verified Answers Which of the following is not good for a sea port? A. A nearby airport B. A nearby city C. A large flat area to build on D. A body of shallow water A body of shallow water What does SOH in SOHCAHTOA mean? Sine= opposite/hypotenuse A surveyor is surveying a site for a bridge over a canyon, and she wishes to find the distance across at a certain point. However, it is impractical to measure the distance directly, so she ...

Nicet Highway Construction Level 2 Questions and Answers Already Passed What are the 5 types of bridge abutments? Closed Abutment, Stub or Perched Abutment, Pedestal or Spill-through Abutment, Integral End Bents, Mechanically Stabilized Abutment What is a "closed abutment"? A closed abutment is a full-height wall with wing walls on each side that retains the full height of the approach embankment. This type of abutment minimizes the required span length of the bridge. What is a stub or perc...

PPD Prep Exam 1 2024 Questions & Answers When should a permit set be issued? (NCARB answer) - ANSWERSCompletion of DD set of Permit Drawings Masterspec Divisions (00-14) - ANSWERS00 - Procurement and Contracting 01 - General Requirements 02 - Existing Conditions 03 - Concrete 04 - Masonry 05 - Steel 06 - Wood Plastic and Composites 07 - Thermal & Moisture Protection 08 - Openings 09 - Finishes 10 - Specialties 11 - Equipment 12 - Furnishings 13 - Special Construction (Fabric...

division 1 - Answer general requirements division 2 - Answer site construction division 3 - Answer concrete division 4 - Answer masonry division 5 - Answer metals division 6 - Answer woods and plastics division 7 - Answer thermal and moisture protection division 8 - Answer doors and windows division 9 - Answer finishes division 10 - Answer specialties division 11 - Answer equipment division 12 - Answer furnishings

In a post tensioned Beam what is the minimum size bar used to support the beam? : #4 Bar What is the minimum height between finished floor and joist in the kitchen is 48" on center? : 7 FT How thick does a load bearing masonry need to be on a single story building? : 6 inches What chemical is used for high heat concrete : retarder when mechanical equipment is on the roof, how far from the edge of the roof should a warning line be if the equipment is running parallel to the roof edge...

Masonry ICC study Questions and Answers Control joints are considered joints that will ..... shortening, shrinkage and/or reduction in the length of the wall. A. Coordinate B. Accommodate C. Reduce D. Control Answer B. Accommodate A standard hook can be a 180° turn plus an extension of at least ..... bar diameters, but not less than ..... inches at the free end of the bar A. 4,2.25 B. 4,2.5 C. 2.2.75 D. 2,3 Answer B. 4bar diameters or 2.5 inches The cleanout opening...