Elevation drawing - Study guides, Class notes & Summaries

Unit 1 - Commercial Building Plans and Specifications Copyright Cengage Learning. Powered by Cognero. Page 1 1. What percentage of the contract price is normally made up by performance bond? a. 25% b. 50% c. 100% d. 200% ANSWER: c 2. What is the name given to the brief description of the project and its location? a. proposal b. notice to bidder c. instruction to bidder d. addendum ANSWER: c 3. Which term refers to the document that outlines modifications made to the contract documents ...

NCCER Electrical 1 Module 10 Questions and Answers Graded A Blue Prints An exact copy of reproduction of an original drawing Floor plan As viewed from above Site plan Location of building on the property Surveys show All property lines, existing public utilities and their location on or near the property Elevation drawings show The exterior face of the building Floor plans are in 2 dimension, length and width Topographic survey shows Property lines, contour lines, notes and symbols Sectio...

A run of screw pipe is being installed in the field. What should be done before inserting a threaded pipe into a fitting? Apply pipe dope Why are regular orifice flanges installed in a pipe? To provide taps for instrumentation During hydrotesting, gate valves within a Piping system are normally ? Blocked open For personnel protection , insulation on pipes that are hotter that 110 degrees F must be atleast? 7 ft A pre-hydro testing checklist will contain all of the following requ...

RePL Exam CASA ACTUAL EXAM 250+ QUESTIONS AND CORRECT DETAILED ANSWERS WITH RATIONALES (VERIFIED ANSWERS)|AGRADE 18 Pages What is switched on first? - ANSWER- Controller Method for the RPAS to alert the Pilot - ANSWER- -Synthetic Voice -Telemetry -Status Lights on the RPA -NOT Autonomous Termination When must a Pre-Flight Inspection be conducted? - ANSWER- Before every flight What basic information is required in a detailed battery logbook? - ANSWER- -Battery ID -The date and Pil...

CPT - Certified Phlebotomy Technician Questions with Certified Solutions What mask needs to be worn in a room with airborne isolation precautions N-95 Mask (plus gloves & a gown) What does PPE stand for Personal Protective Equipment What PPE needs to be worn in a room with droplet isolation precautions Gloves, mask, eye protection & gown What PPE needs to be worn in a room with contact precautions Gloves & gown What gauge needle will cause hemolysis 25 gauge (and above) (to small & it breaks...

ASME Correct Answer American Society of Mechanical Engineers Half Scale Correct Answer 1:2 Orthographic projection Correct Answer A two dimensional drawing of the front, top, and side views of an object Pictorial drawing Correct Answer a drawing that shows an object as it appears to the human eye, includes isometric and perspective drawings Layers Correct Answer used to make lines of varying colors and widths on CAD drawings Isometric projection Correct Answer three dimensional dr...

Unit 1 - Contract Documents and Drawings Copyright Cengage Learning. Powered by Cognero. Page 1 1. When referring to the MasterFormat® specification, which division does general electrical work fall under? a. Division 11 b. Division 23 c. Division 26 d. Division 33 ANSWER: c 2. For which type of payment agreement is a contractor required to complete a job for a fixed dollar amount, regardless of any problems that may be encountered? a. lump sum b. unit price c. cost plus fee d. net sum...

ENCE 200 FINAL EXAM QUESTIONS AND ANSWERS 100% PASS Invert measured from the base of the interior of a pipe Steps to Calculating Elevation of a Point Between Two Known Points 1. Draw temporary line connecting one known point to the other, crossing through the known point. 2. Measure the length (L) of the temporary line, using engineering scale, following scale of drawing. 3. Subtract lower elevation (B) from higher elevation (A). 4. Divide length (L) of temporary line from C in order to get ...

1 PLUMBING BOOK MODULE 5 EXAM | QUESTIONS & ANSWERS (VERIFIED) | LATEST UPDATE | GRADED A+ The act of showing the actual building, room, or object reduced in proportion from full size to a smaller size is called Correct Answer: scaling the drawing The instrument used to draw and measure scaled drawings is an Correct Answer: Architect's scale To establish the limits of a measurement on a drawing, use Correct Answer: extension lines To check for certain practices that must be used i...

Which statement concerning broker's price opinions (BPOs) is TRUE? A) The payment for a BPO must be paid to the broker and not directly to the sales associate who prepared the BPO. B) A broker's license is required to conduct a BPO. C) A BPO is also referred to as an appraisal of real property. D) All BPOs must conform to Uniform Standards of Professional Appraisal Practice (USPAP). - Answer-A Which document would contain information regarding the architectural design standards that must...