80 4th Class Power Engineering Unit B1: Lubrication and Bearings Review Quiz Questions With Well Researched Answers|24 Pages
2 views 0 purchase
Course
80 4th Class Power Engineering Unit B1
Institution
80 4th Class Power Engineering Unit B1
The best way to clean a bearing is:
Select one:
a. to send it to the manufacturer
b. to acid clean it
c. to first remove it from the machine
d. to vacuum it - ️️c
This number indicates the acidity of an oil:
Select one:
a. pH
b. acidity
c. alkalinity
d. neutralization - ️️d
Th...
80 4th Class Power Engineering Unit B1:
Lubrication and Bearings Review Quiz
Questions
The best way to clean a bearing is:
Select one:
a. to send it to the manufacturer
b. to acid clean it
c. to first remove it from the machine
d. to vacuum it - ✔ ✔ c
This number indicates the acidity of an oil:
Select one:
a. pH
b. acidity
c. alkalinity
d. neutralization - ✔ ✔ d
This type of thrust bearing does not utilize an "oil wedge":
Select one:
a. Mitchell type
b. collar type
c. flotation type
d. Kingsbury type - ✔ ✔ b
,Three causes of oil related bearing failure are, excessive oil
temperature, loss of oil, and:
Select one:
a. improper oil selection
b. poor refining processes
c. relying on an automatic oil feeder
d. no extreme pressure additive in the oil - ✔ ✔ a
To ease installation of a bearing on a shaft, the bearing:
Select one:
a. is greased
b. may be sub-cooled
c. may be pressed onto the shaft
d. may be heated - ✔ ✔ d
Using pressurized air to blow out a cleaned bearing:
Select one:
a. should only be done when ventilation is maximum
b. must be done only while the bearing is hot
c. will cause the bearing to become damaged
d. requires high pressure air - ✔ ✔ c
The characteristics of a good grease are largely determined by:
Select one:
a. its thickening agent
b. its consistency
, c. the type of oil used in the grease
d. its protective coating - ✔ ✔ a
The groove that is cut in the top half in the lining of a shell bearing
should not extend closer to the ends than:
Select one:
a.3 mm
b. 10 mm
c. 1.25 cm
d. 1.7 cm - ✔ ✔ c
The intermeshing of gear teeth is a place where
Select one:
a. temperature control is very important
b. friction reduction is very important
c. sealing is very important
d. shock absorption is very important - ✔ ✔ d
A form of lubrication, which requires continual motion of a shaft or
surface, is:
Select one:
a. boundary lubrication
b. forced lubrication
c. controlled lubrication
d. fluid film lubrication - ✔ ✔ d
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller jackline98. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
