SPI Practice Test QUESTIONS AND
ANSWERS
Which of the following do the source and the medium determine?
a. duty factor
b. frequency
c. propagation speed
d. axial resolution - answersd.
Axial resolution is affected by all of the following EXCEPT
a. frequency
b. damping
c. spatial pulse leng...
Which of the following do the source and the medium determine?
a. duty factor
b. frequency
c. propagation speed
d. axial resolution - answers✔✔d.
Axial resolution is affected by all of the following EXCEPT
a. frequency
b. damping
c. spatial pulse length
d. focusing - answers✔✔d.
Damping in a transducer
a. reduces the number of cycles in a pulse and increases the quality factor
b. increases the number of cycles in a pulse and increases penetration
c. causes poor axial and lateral resolution
d. reduces the duty factor and increases the range of transmitted frequencies -
answers✔✔d.
Far zone beam divergence can be reduced on a single-element transducer by using
a. a transducer with a smaller element diameter
b. a higher frequency transducer
c. a lower frequency transducer or a smaller element diameter
d. adjustable focusing - answers✔✔b.
The area between the face of an unfocused single-element transducer and the point
where the beam starts to diverge is the
a. Fraunhofer zone
b. refraction zone
c. focal zone
d. near zone - answers✔✔d.
Assuming a fixed frequency, what happens if the diameter of an unfocused
transducer is increased?
a. the far zone divergence increases
b. the penetration decreases
c. the length of the near zone increases
d. the length of the near zone decreases - answers✔✔c.
Which of the following does NOT affect lateral resolution?
a. focusing
b. element diameter
c. frequency
d. bandwidth - answers✔✔d.
Higher frequency transducers provide
a. improved lateral resolution
b. smaller Doppler shifts
c. improved axial resolution and reduced attenuation
d. increased penetration - answers✔✔a.
Ultrasound waves that are traveling through a medium consist of
a. electromagnetic and radio frequencies
b. compressions and refractions
c. electromagnetic and ionizing frequencies
d. compressions and rarefactions - answers✔✔d.
What is the difference between audible sound and ultrasound?
a. audible sound waves can travel through a vacuum
b. audible sound has a higher frequency
c. ultrasound has a higher frequency
d. ultrasound waves are ionizing - answers✔✔c.
A decrease in the thickness of a piezoelectric element will result in
a. a greater pulse duration
b. an increase in the propagation speed
c. a decrease in the quality factor if the bandwidth decreases
d. an increase in the frequency of the transducer - answers✔✔d.
The resonant frequency of a pulsed-wave ultrasound transducer is dependent on
a. damping
b. the backing material
c. the thickness of the piezoelectric element and the speed of sound through the
piezoelectric element
d. the amplitude of the voltage applied to the piezoelectric element - answers✔✔c.
The image is brighter at the level of the focal zone. Which of the following controls is
best to correct this?
a. overall gain
b. TGC
c. acoustic power
d. PRF - answers✔✔b.
If the frequency is doubled,
a. the duty factor will increase
b. the period will double
c. the wavelength will double
d. the wavelength will be one-half - answers✔✔d.
The typical range of pulse repetition frequencies in a pulse-echo ultrasound system
is
a. 2,000 Hz to 20,000 Hz
b. 20 MHz to 200 MHz
c. 20,000 Hz to 200,000 Hz
d. 1,000 Hz to 2,000 Hz - answers✔✔d.
If the number of cycles in a pulse is reduced,
a. the pulse repetition frequency is automatically reduced
b. the spatial pulse length increases
c. the pulse duration is reduced which results in a lower duty factor
d. the bandwidth is decreased and the quality factor is increased - answers✔✔c.
The minimum reflector separation required to produce separate echoes is
a. the spatial resolution of the ultrasound system
b. the temporal resolution
c. the attenuation coefficient
d. the total attentuation - answers✔✔a.
As the frequency of sound increases,
a. the amount of scatter is increased
b. the attenuation decreases
c. the amount of scatter decreases
d. the penetration increases - answers✔✔a.
Which of the following transducers provides the maximum penetration?
a. 10.0 MHz
b. 7.5 MHz
c. 2.25 MHz
d. 3.5 MHz - answers✔✔c.
The average attenuation of ultrasound energy in the patient is approximately
a. 2.0 dB per cm per MHz
b. 10.0 dB per cm per MHz
c. 5. dB per cm per MHz
d. 0.7 dB per cm per MHz - answers✔✔d.
If sound from a 3 MHz transducer has 3 dB of attenuation after traveling through 2
cm of tissue, what is the amount of attenuation of sound from a 5 MHz transducer
after traveling through 1 cm of the same tissue?
a. 5 dB
b. 1 dB
c. 2 dB
d. 2.5 dB - answers✔✔d.
The half-value layer or the half-intensity-depth
a. is the depth where the intensity is 50% of the originally transmitted intensity
b. increases as the frequency of the transmitter increases
c. is the range of frequencies contained in an ultrasound pulse
d. is the attenuation coefficient in tissue - answers✔✔a.
The speed of ultrasound in soft tissue is closest to
a. 1.54 mm/sec
b. 1540 km/sec
c. 1540 mm/sec
d. 1540 m/s - answers✔✔d.
Ultrasound energy is traveling through the same medium. If the frequency is
doubled, the propagation speed is
a. quartered
b. doubled
c. halved
d. unchanged - answers✔✔d.
The reason most ultrasound systems are calibrated at 1540 meters per second is
because
a. 1540 meters per second is the average speed of sound encountered in the patient
b. 1540 meters per second is the maximum speed of sound encountered in a patient
c. 1540 meters per second is the speed of sound in muscle
d. 1540 meters per second is the maximum speed of sound in a patient -
answers✔✔a.
The propagation speed is highest in
a. bone
b. tissue
c. fat
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller JustTracy. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $8.49. You're not tied to anything after your purchase.
