100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
Previously searched by you
AUTOMOTIVE COLLISION ASE PRACTICE EXAM ACTUAL EXAM COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS 2024 (VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND NEW!!$20.99
Add to cart
AUTOMOTIVE COLLISION ASE PRACTICE EXAM ACTUAL EXAM COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS 2024 (VERIFIED ANSWERS) |ALREADY GRADED A+||BRAND NEW!!
4 views 0 purchase
Course
AUTOMOTIVE COLLISION ASE
Institution
AUTOMOTIVE COLLISION ASE
AUTOMOTIVE COLLISION ASE PRACTICE EXAM
ACTUAL EXAM COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS 2024 (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW!!
AUTOMOTIVE COLLISION ASE PRACTICE EXAM
ACTUAL EXAM COMPLETE QUESTIONS AND
CORRECT DETAILED ANSWERS 2024 (VERIFIED
ANSWERS) |ALREADY GRADED A+||BRAND NEW!!.
A dent in an aluminum panel is being repaired. technician A says that applying heat will
help the aluminum return to its undamaged state. technician B says that a non-contact
thermometer can be used to detect the temperature of the aluminum. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
A panel is being prepared for MIG welding. Technician A says to remove all coatings,
paints and primers from the weld area. Technician B says not to remove the galvanized
coating. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
When removing a door skin, Technician A says a cutting torch should be used to
separate the welded door skin from the door skin him flange. Technician B says a grinder
should be used to grind away the edge of the door skin. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that the hammer-off-dolly method will stretch the metal. technician B
says that the hammer-on-dolly method will stretch the metal. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that because we cannot know where the HSS (High Strength Steel) is
located on the vehicle, all sheet metal should be treated as HSS. technician B says the
body repair manual will sometimes identify those parts that are made of HSS. Who is
right?
A. A only
,B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
A technician complains of seeing white spots after welding. Technician A says to
complete the weld using a skip weld technique by starting in the middle of the joint and
working outwards in both directions, alternating welds. technician B says to set the
machine on the pulse setting and complete the weld by welding on the pulse setting in a
single direction. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
A long weld is to be made. After tackling the pieces together, technician A says to
complete the weld using a skip weld technique by starting in the middle of the joint and
working outwards in both directions, alternating welds. Technician B says to set the
machine on the pulse setting and complete the weld by welding on the pulse setting in a
single direction. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
Technician A says that the burn test can be used to identify plastic. technician B says
that the burn test creates toxic fumes. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERB. B only
Technician A says that with the tack welding tip in place on the hot air welding, a welding
rod is not necessary to tack weld plastic parts. Technician B says that a plastic welding
rod may be required. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERA. A only
Technician A says that most thermosetting plastics can be fusion welded. technician B
says that thermoplastics can be fusion welded. Who is right?
A. A only
B. B only
C. Both A and B
, D. Neither A nor b - ANSWERB. B only
When performing an adhesive plastic repair, technician A says an adhesion promoter is
necessary if the base plastic is ground and it melts and smears. Technician B says the
adhesion promoter is required on plastics that do not melt and smear when ground. Who
is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERA. A only
Technician A says that TPO plastics can be repaired using the airless plastic welder.
Technician B says that TPO plastics can be repaired using adhesives. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor B - ANSWERC. Both A and B
Rough cutting can be done with the oxyacetylene torch if enough room is left to trim the
heat-affected area. How much room is needed?
A. 1/2 inch
B. 2 inches
C. 4 inches
D. 6 inches - ANSWERC. 4 inches
An insurance appraiser writes and estimate on the repair of a door indicating the
replacement of the outer panel and a repair to the door frame. Once the outer skin is
removed, the technician discovers damage to the intrusion bearm. Technician A says the
repair to the beam is included in the provision for the repair of the door frame.
Technician B says it is not, and a separate procedure and line item on the bill is called
for. Who is right?
A. A only
B. B only
C. Both A and B
D. Neither A nor - ANSWERD. Neither a nor B
A car is brought into the shop after an authorization to commence work is obtained from
the customer. Having been stored outside for weeks and being covered with bird
drippings, technician A says the car needs to be washed with a solvent prior to
commencing work. Technician B says the car needs a wash with water and detergent
first. Who is right?
A. A only
B. B only
C. Both A and B
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Americannursingaassociation. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $20.99. You're not tied to anything after your purchase.
