Exam (elaborations)
CWB Module 16 Exam Questions And Correct Answers
- Course
- Institution
CWB Module 16 Exam Questions And Correct Answers...
[Show more]
Content preview
CWB Module 16 Exam Questions And Correct AnswersTo ensure that calipers are accurate you would
a) use a vernier
b) calibrate them
c) always take a reading to three decimal places - Answer b) calibrate them
2. True or False?
"Systematic errors can always be avoided by using a sufficiently precise measuring
instrument." - Answer False
State one disadvantage of using a "go/no-go" type gauge for determining whether a
product is within tolerance. - Answer It does not give the actual measurement which
could be useful in process control
A high quality measuring instrument. .
a) should not be calibrated unless something goes wrong
b) should be calibrated by the operator every time it is used
c) should be calibrated regularly as specified in a formal calibration program - Answer
c) should be calibrated regulary as specified in a formal calibration program
True or False?
"When reading a meter with a pointer always stand directly in front to avoid a parallax
error." - Answer True
State one reason for measuring dimensions from a single reference line or datum -
Answer To avoid cumulative errors
, When making accurate measurements with a long steel tape it is important that the
tape .
a) be held loose so it does not stretch
b) be held under the correct tension applied with a tension handle
c) be held as tight as possible so there is no slack - Answer b) be held under the correct
tension applied with a tension handle
Two methods for determining if a surface is vertical? - Answer Plumb bob or spirit level
How would you check that a flange was at right angles to the web if you were unable to
use a try square
touch the flange due to the fillet weld? - Answer Measure with a rule from the flange to
the try square at two points. the two reading should be the same
Describe an easy method of checking a square - Answer Place the square against a
straight edge of a plate, scribe a line, turn it over and check if the line is square
True or False?
"When using a string as a reference line to measure distortion in a plate always make
the
measurements horizontally from the string to the plate." - Answer True
What instrument(s) would you use for checking the angle of a weld preparation? -
Answer Bevel gauge and/or protractor
According to CSA W59 what is the minimum distance from the weld at which to measure
the preheat in plates 44mm thick?
a) 75mm
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Easton. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
77254 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now