CWB 2 All Module Exams Questions And Verified
Answers (A+ Graded)
A Plasma is:
A) A gas composed of positive ions and free electrons
B) A liquid used to prevent spatter from adhering
C) The major element in an inverter power source
D) Found in all electrical circuit - Answer A) A gas composed of positive ions and free
electrons
What polarity will give the maximum melting rate (burn-off rate) when the SMAW process
is used?
A) DCEP
B) ACEP
C) DCEN
D) ACEP - Answer C) DCEN
What welding power source type does the SMAW process use?
A) Constant Current
B) Constant Voltage
C) Pulsed Current
D) Pulsed Voltage - Answer A) Constant Current
The drooping welding power source is designed for:
,A) Constant voltage regardless of the current demand
B) Constant arc length regardless of current
C) Nearly constant current regardless of voltage fluctuations
B) Low open circuit voltage - Answer C) Approximately constant current independent of
voltage variations
A self-regulating welding arc is obtained from a:
A) Constant current power source operating a wire feed system with a constant speed
drive
B) Constant voltage power source using a wire feed system with voltage sensing
C) Constant current power source
D) Constant voltage power source with a constant speed wire feed system - Answer D)
Constant voltage power source with a constant speed wire feed system
Short circuit current is depended on the:
A) Voltage in the circuit
B) Static characteristic of the power source
C) Position of welding
D) Skill of the welder - Answer B) Static characteristic of the power source
A Transformer is a device that:
A) Transforms AC to DC
B) Works only to change a DC voltage
C) Changes the value of an AC voltage but does not change the frequency
, D) Is made from a semiconductor - Answer C) Changes the value of an AC voltage but
does not change the frequency
A Rectifier is a device that converts:
A) DC current to AC current
B) AC Current to a high value DC current
C) DC current to a high value DC current
D) AC current to DC current - Answer D) AC current to DC current
Microprocessor controls are used in the more modern welding power sources to:
A) Provide more sophisticated levels of control for the welding system
B) Allow welding variables to be stored for use later
C) Provide feedback control
D) All of the above - Answer D) All of the above
Inverter welding power sources have more control of the welding arc because they:
A) Utilize feedback control
B) Can act very quickly to compensate for any change in the welding circuit
C) Can utilize complex waveforms that allow spray transfer out-of-position
D) All of the above - Answer D) All of the above
It would be correct to say the
A) Expansion and contraction are proportional to the dimensions of the heated area
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Chrisyuis. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.99. You're not tied to anything after your purchase.