NCCER Core Module 3 Questions and Correct Answers the Latest Update and Recommended Version
4 views 0 purchase
Course
NCCER
Institution
NCCER
Adjustable Wrench
• A smooth-jawed wrench with an adjustable jaw used for turning nuts and bolts. Often
referred to as a Crescent wrench due to brand recognition
Ball-Peen Hammer
• A hammer with a flat face that is used to strike cold chisels and punches. The rounded
end -the peen- is us...
TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
NCCER Core Module 3 Questions and
Correct Answers the Latest Update and
Recommended Version
Adjustable Wrench
• A smooth-jawed wrench with an adjustable jaw used for turning nuts and bolts. Often
referred to as a Crescent wrench due to brand recognition
Ball-Peen Hammer
• A hammer with a flat face that is used to strike cold chisels and punches. The rounded
end -the peen- is used to bend and shape soft metal.
Bell-faced hammer
• A claw hammer with a slightly rounded, or convex, face.
Bevel
• To cut on a slant at an angle that is not a right angle (90 degrees). The angle or
inclination of a line or surface that meets another at any angle but 90 degrees.
Box-end wrench
• A wrench, usually double-ended, that has a closed socket that fits over the head of a
bolt
, TestTrackers: Unlock Your Exam Potential! | Quality Practice Materials | Boost Your Confidence Today!
• A straight steel rod with a curved claw at one end that is used to pull nails that have
been driven flush with the surface of the wood or slightly below it.
Chisel
• A metal tool with a sharpened, beveled edge used to cut and shape wood, stone, or
metal.
Chisel Bar
• A tool with a claw at each end, commonly used to pull nails.
Claw Hammer
• A hammer with a flat striking face. the other end of the head is curved and divided
into two claws to remove nails.
Combination square
• An adjustable carpenter's tool consisting of a steel rule that slides through an
adjustable head; it can be used to mark 45 and 90 degree angles.
combination wrench
• A wrench with an open end and a closed end.
Dowel
• A pin, usually round, that fits into a corresponding hole to fasten or align two pieces.
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TestTrackers. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $10.49. You're not tied to anything after your purchase.
