Exam (elaborations)
Plumbing Journeyman Exam with Complete Solutions
- Course
- Institution
Plumbing Journeyman Exam with Complete Solutions
[Show more]
Content preview
Plumbing Journeyman Exam with CompleteSolutions
inlet, outlet, seal (IPC 1002.2) CORRECT ANS-Slip joints shall be made with an approved
elastomeric gasket and shall be installed only on the trap __________, trap __________ and
within the trap__________.
a liquid-seal trap (IPC 1002.1) CORRECT ANS-Each plumbing fixture shall be separately
trapped by _____________, except as otherwise permitted by this code.
2 (IPC 1003.4.2.1) CORRECT ANS-Oil separators shall have a depth of not less than _____ feet
below the invert of the discharge drain.
False (IPC 1002.3) CORRECT ANS-Bell traps are not prohibited. T/F
6 (IPC 1003.3.5.2) CORRECT ANS-The flow-control device shall be vented and terminate not
less than _____ inches above the flood rim level.
True (IPC 1002.3) CORRECT ANS-Traps that depend on moving parts to maintain the seal are
prohibited. T/F
24 (IPC 1002.1) CORRECT ANS-The vertical distance from the fixture outlet to the trap weir
shall not exceed _______ inches.
False (IPC 1002.5) CORRECT ANS-A trap shall be permitted to be larger than the drainage
pipe into which the trap discharges. T/F
True CORRECT ANS-The finished appearance of a building is shown in the elevation drawings.
T/F
, True CORRECT ANS-All parts of a scaled drawing are proportional. T/F
False CORRECT ANS-The location of the sewer and water mains is given in the plumbing
drawings. T/F
True CORRECT ANS-Brazed joints perform better in high-pressure applications than soldered
joints. T/F
True CORRECT ANS-Thermoplastic piping systems can be repaired by welding. T/F
replaced CORRECT ANS-If lead pipe is found in an existing plumbing system, it should be
____.
800°F CORRECT ANS-Brazing requires a temperature higher than ______
True CORRECT ANS-The amount of oxygen and acetylene should be adjusted to produce a
neutral or carburizing flame before beginning to braze. T/F
True CORRECT ANS-Lead-free solder is made from tin alloyed with antimony, copper, or
silver. T/F
False CORRECT ANS-Soldered joints have higher mechanical strength than brazed joints. T/F
False CORRECT ANS-The Federal Safe Drinking Act Amendments of 1986 require that silver
solder be used when joining copper pipe used for potable water systems. T/F
nickel CORRECT ANS-The brazing filler metal used when extreme heat and corrosion
resistance is needed is ____.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller TheeGrades. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $11.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75323 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now