API 570 practice test UPDATED ACTUAL Questions and CORRECT Answers
4 views 0 purchase
Course
API 510
Institution
API 510
API 570 practice test UPDATED ACTUAL
Questions and CORRECT Answers
In severe refinery services which type of pipe is normally used? - CORRECT ANSWER-
seamless
Pressure applied inside a pipe creates stress in the pipe wall. These stresses are highest on
which weld orientation? - CORRECT ANSWE...
API 570 practice test UPDATED ACTUAL
Questions and CORRECT Answers
In severe refinery services which type of pipe is normally used? - CORRECT ANSWER-
✔✔seamless
Pressure applied inside a pipe creates stress in the pipe wall. These stresses are highest on
which weld orientation? - CORRECT ANSWER- ✔✔longitudinal weld
Per B31.3, how much RT is conducted on circumferential welds of a pipe in normal service. -
CORRECT ANSWER- ✔✔10%
for welded pipe, the normal thickness of under-tolerance is? - CORRECT ANSWER-
✔✔.010 or 10 mils
when qualifying a weld procedure the esential variables must: - CORRECT ANSWER-
✔✔be recorded on both the WPS & PQR
a pipe has a thickness designation of "40S". what does the "S" mean? - CORRECT
ANSWER- ✔✔stainless steel
Generally socket-welded pipe is not used for nominal pipe sizes above: - CORRECT
ANSWER- ✔✔2 inches
A propane piping system should be classified as? - CORRECT ANSWER- ✔✔Class 1
According to ASME/ANSI B16.5 flanges from plate materials can only be used for: -
CORRECT ANSWER- ✔✔Blind flanges
The corrosiveness of soils can be determined by measuring the soils: - CORRECT
ANSWER- ✔✔Resistivity
, Preheat should never be substituted for PWHT if: - CORRECT ANSWER- ✔✔The PWHT
was designed to prevent environmental cracking
During welding, non-esential variables: - CORRECT ANSWER- ✔✔Must be recorded only
on the WPS and must be followed by the welder.
During a hydrotest, all joints should be: - CORRECT ANSWER- ✔✔left uninsulated
ASME/ANSI B16.5 requires flanges to be: - CORRECT ANSWER- ✔✔marked with the
class rating.
Graphitization of carbon steels begins to occur when metal temperatures exceed: -
CORRECT ANSWER- ✔✔800 F
During pipe fabrication who has overall responsibility for compliance with the code? -
CORRECT ANSWER- ✔✔owner/user
Who has the responsibility to determine the extent of PMI performed? - CORRECT
ANSWER- ✔✔owner/user
An inservice process pipe should be classified as Class 1 when the % of H2S exceeds: -
CORRECT ANSWER- ✔✔3%
A welder becomes unqualified when he has not welded using the: - CORRECT ANSWER-
✔✔Process for 6 months
A PQR test coupon with a shell thickness of "T" can generally be used to qualify a wall
thickness on the WPS up to. - CORRECT ANSWER- ✔✔2T
A pressure test is always required: - CORRECT ANSWER- ✔✔whenever the authorized
inspector believes one is necessary
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller MGRADES. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $9.49. You're not tied to anything after your purchase.
