Mass 1A Hoisting Study Guide Questions With Solutions
1 view 0 purchase
Course
Massachusetts Hoisting Training
Institution
Massachusetts Hoisting Training
Mass 1A Hoisting Study Guide Questions
With Solutions
Whats the purpose of 520CMR 6.00 To establish reasonable requirements to protect the
public safety of the citizens of the commonwealth from the hazards inherent in the operation of
housting machinery by establishing min standards neccessar...
Mass 1A Hoisting Study Guide Questions
With Solutions
Whats the purpose of 520CMR 6.00 To establish reasonable requirements to protect the
public safety of the citizens of the commonwealth from the hazards inherent in the operation of
housting machinery by establishing min standards neccessary to obtain a hoisting machinery
operators license or temp permit
ANSI American National Standards Institute
Apprentice license A document issued by the dept upon proof of registratio at a training
facility and with the division of apprentice training within the dept of labor standards, which
enables the holder to operate hoisting machinery under the direct guidance and supervision of a
duly licensed person licensed to operate the category of hoisting machinery for which
documentation is issued
ASME American Society of Mechanical Engineers
cargo A load, quantity or volume that can be processed or transported
, Mass 1A Hoisting Study Guide Questions
With Solutions
Apprentice licensee A person, 18 or older, registered with the dept of labor standards and
has obtained an apprentice license to operate while under direct guidance and supervision of a
duly licensed person
Chief The chief of inspections-mechanical of the dept of public safety
Compact hoisting machinery Machinery wirh a gross vehicle weight not exceeding 10,000
lbs, excluding Class 1, Class 3 and Class 4 hoisting machinery as listed in 520CMR 6.10.
Machinery operated under temp permit may not exceed 8,000lbs
DAT Division of Apprentice Training
Department Dept of Public Safety
DOT Department of Transportation
Emergency procedure Actions required to be taken when imminent danger may occur to
prevent damage to life, property, or to public safety
, Mass 1A Hoisting Study Guide Questions
With Solutions
Company license Issued by an exempt company that has a dept approved in service
training program and is only valid for machinery used on company property
fork lift Any mobile powered truck used to carry, push, lift, stack or tier materials,
EXCLUDING earth moving, over the road haulage trucks and equipment which was designed to
move earth but modified to accept forks
Hoisting machinery Derricks, cableways, machinery used for discharging cargoes, and
temp elevator cars used on excavation work or hoisting building materials, when the motive
power to operate such machinery is mechanical and other than steam, and any other equipment
that has the MIN capability of hoisting a load HIGHER THAN 10 FT, and either the capability
of lifting loads GREATER THAN 500 LBS or the capacity of the bucket EXCEEDS 1/4 CUBIC
YARDS; overhead bridge cranes, electric or air driven hoists, specialty equipment as catagorized
under 520CMR 6.00
incedent A situation that results in serious injury, property damage or any condition that is
necessary for the preservation of the public health or safety
, Mass 1A Hoisting Study Guide Questions
With Solutions
Injury and incedent documentation A form furnished by the department detailing all
specific info regarding any serious injury, property damage or mechanical failure that may have
occurred
inspector A District Engineering Inspector employed by the Department
Manufacturer approved attachment Attachable equipment tailored to perform a particular
task, designed or approved for use in accordance with the equipment manufacturers spec's. If the
manufacturer doesnt exist, a MASS registered professional engineer shall review and approve in
writing the actions and reasons for said specs to the attachable equipment
mechanical failure Damage to or breakdown of hoisting machinery which affects the
capacity or safe operation of the equipment per the manufacturers specifications
1% If a crane is out of level by 1%, you can lose upto 50% capacity
3300 pounds Pounds weight of one cubic yard of soil
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller UpperClass. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $21.99. You're not tied to anything after your purchase.
