100% satisfaction guarantee Immediately available after payment Both online and in PDF No strings attached
logo-home
CCIL Section 3C, 5C Questions and Answers $12.99   Add to cart

Exam (elaborations)

CCIL Section 3C, 5C Questions and Answers

 8 views  0 purchase
  • Course
  • CCIL
  • Institution
  • CCIL

CCIL Section 3C, 5C Questions and Answers 3C: Cylindrical Moulds for testing specimens should be... Made of non absorbent surfaces and sufficiently rigid to hold their shape during moulding. 3C: Do not use cardboard moulds when... Concrete strengths greater than 35MPA Previous P...

[Show more]

Preview 1 out of 3  pages

  • October 9, 2024
  • 3
  • 2024/2025
  • Exam (elaborations)
  • Questions & answers
  • CCIL
  • CCIL
avatar-seller
Pogba119
CCIL Section 3C, 5C Questions and
Answers
3C: Cylindrical Moulds for testing specimens should be... - answer Made of non
absorbent surfaces and sufficiently rigid to hold their shape during moulding.

3C: Do not use cardboard moulds when... - answer Concrete strengths greater than
35MPA

3C: Rectangular Moulds - answer Will be used for Flexural Test Specimens. Mould
shall be at least 50mm longer than length of span. Cross sectional area may not exceed
3mm.

3C: Tamping Rod for 100mm x 200mm... - answer Round Steel Straight tamping rod
10mm+-1mm in diameter, between 450mm no more than 600mm in length with a
hemispherical tip.

3C: For cylinders 150mm in diameter or greater, and for Rectangular Moulds the rod
must be... - answer Steel Straight bar, 16mm +- 1mm in diameter, not less than
450mm nor more than 600mm in length and one hemispherical tip.

3C: Internal Vibrators - answer Vibration Frequency must be 120Hz or Greater.
Outside diameter of vibrating element to be between 20mm to 40mm. The length should
be 50mm less than mould being consolidated.

3C: Vibration of Beams - answer The diameter and the thickness of an element shall
not exceed 1/3 of the width of the mould

3C: External Vibrators - answer Minimum frequency of 60Hz

3C: Dimensions of Steel Strike off Bar - answer 6mm x 25mm x 450mm

3C: Temperature Measuring Device - answer Should be capable of reading 0°-50° C,
Accurate to 0.5°C.

3C: Reference Temperature Device - answer A reference temperature measuring
device for calibration should be accurate and readable to +-0.2°C

3C: Time Constraints - answer The moulding of specimens must occur within 20
minutes, after sampling and including transport and remixing.

The benefits of buying summaries with Stuvia:

Guaranteed quality through customer reviews

Guaranteed quality through customer reviews

Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.

Quick and easy check-out

Quick and easy check-out

You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.

Focus on what matters

Focus on what matters

Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!

Frequently asked questions

What do I get when I buy this document?

You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.

Satisfaction guarantee: how does it work?

Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.

Who am I buying these notes from?

Stuvia is a marketplace, so you are not buying this document from us, but from seller Pogba119. Stuvia facilitates payment to the seller.

Will I be stuck with a subscription?

No, you only buy these notes for $12.99. You're not tied to anything after your purchase.

Can Stuvia be trusted?

4.6 stars on Google & Trustpilot (+1000 reviews)

77254 documents were sold in the last 30 days

Founded in 2010, the go-to place to buy study notes for 14 years now

Start selling
$12.99
  • (0)
  Add to cart