Exam (elaborations)
FOA CFOT Terms and Definitions A thru Z|
- Course
- Institution
FOA CFOT Terms and Definitions A thru Z|
[Show more]
Content preview
FOA CFOT Terms and Definitions A thru Z|Attenuation / Attenuator - ✔✔Reduction in optical power as it passes along a fiber is called
___________, usually expressed in dB. Devices that do this purposefully are called
_____________
Angled Physical Contact (APC) - ✔✔Technique involving polishing the end surface of the fiber
to a slight angle to prevent reflectance. Considered better than convex polishing techniques
(PC).
Analog - ✔✔Signals that are continually changing as opposed to being digitally encoded.
Absorption - ✔✔Portion of fiber optic attenuation resulting from the conversion of optical
power to heat
Buffer - ✔✔A protective coating applied directly on the fiber.
Bit - ✔✔An electrical or optical pulse that carries information.
Bit-Error Rate (BER) - ✔✔Fraction of data bits transmitted that are received in error.
Bending Loss / Microbending Loss - ✔✔Loss in fiber caused by stress on the fiber bet around
a restrictive radius.
Bandwidth - ✔✔Range of signal frequencies or bit rate within which a fiber optic
component, link or network will operate. The maximum speed that data can be transmitted
over the link.
Backscattering - ✔✔The scattering of light in a fiber back toward the source, used to make
OTDR measurements.
, Coarse Wavelength Division Multiplexing (CWDM) - ✔✔Use of lasers spaced widely over the
range of 1260nm to 1670 nm.
Cutoff Wavelength - ✔✔The wavelength beyond which singlemode fiber only supports one
mode of propagation is called a what?
Cutback Method - ✔✔Technique for measuring loss of bare fiber by comparing the sources
initial coupled power to the power measured at the end of a long length of fiber.
Coupler - ✔✔Device that splits or combines light from more than one fiber.
Core - ✔✔The center of the optical fiber through which light is transmitted.
Connector - ✔✔A device that provides for a demountable connection between two fibers (or
fiber and active device). Also provides protection for the fiber.
Cladding - ✔✔Lower fractive index optical coating over the core of fiber that "traps" light
into the core.
Chromatic Dispersion - ✔✔Temporal spreading of a pulse in an optical waveguide caused by
the wavelength dependence of the velocities of light.
Dispersion - ✔✔Temporal spreading of a pulse in an optical waveguide. May be caused by
modal or chromatic effects.
Distributed Feedback Laser (DFB) - ✔✔Used for high speed and long distance transmitters.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Examsplug. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
79223 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now