Exam (elaborations)
API 570 DEFINITIONS QUESTIONS & ANSWERS
- Course
- Institution
API 570 DEFINITIONS QUESTIONS & ANSWERS
[Show more]
Content preview
API 570 DEFINITIONS QUESTIONS & ANSWERSAny metallic material (including welding filler materials) that contains alloying elements,
such as chromium, nickel, or molybdenum, which are intentionally added to enhance
mechanical or physical properties and/or corrosion
resistance. Alloys may be ferrous or non-ferrous based.
NOTE Carbon steels are not considered one for purposes of this code. - Answers -alloy
material
A physical change in any component that has design implications affecting the pressure
containing capability or
flexibility of a piping system beyond the scope of its original design. The following are
not considered alterations:
comparable or duplicate replacements and the addition of small-bore attachments that
do not require reinforcement
or additional support. - Answers -Alteration
The code, code section, or other recognized and generally accepted engineering
standard or practice to which the
piping system was built or which is deemed by the owner or user or the piping engineer
to be most appropriate for the
situation, including but not limited to the latest edition of ASME B31.3. - Answers -
applicable code
Approval/agreement to perform a specific activity (e.g. repair) prior to the activity being
performed. - Answers -Authorization
Defined as any of the following:
a) the inspection organization of the jurisdiction in which the piping system is used,
b) the inspection organization of an insurance company that is licensed or registered to
write insurance for piping systems,
c) an owner or user of piping systems who maintains an inspection organization for
activities relating only to his equipment and not for piping systems intended for sale or
resale,
d) an independent inspection organization employed by or under contract to the owner
or user of piping systems that are used only by the owner or user and not for sale or
resale,
e) an independent inspection organization licensed or recognized by the jurisdiction in
which the piping system is used and employed by or under contract to the owner or
user. - Answers -Authorized Inspection Agency
An employee of an authorized inspection agency who is qualified and certified to
perform the functions specified in API 570. An NDE examiner is not required to be an
authorized piping inspector. Whenever the term inspector is used in API 570, it refers to
an authorized piping inspector. - Answers -authorized piping inspector
, Instrument and machinery piping, typically small-bore secondary process piping that
can be isolated from primary piping systems. Examples include flush lines, seal oil lines,
analyzer lines, balance lines, buffer gas lines, drains, and vents. - Answers -auxiliary
piping
Designated areas on piping systems where periodic examinations are conducted.
NOTE Previously, CMLs were referred to as "thickness monitoring locations" (TMLs).
CMLs may contain one or more examination points. CMLs can be a plane through a
section of piping or a nozzle or an area where CMLs are located on a piping circuit. -
Answers -CMLs
The code or standard to which the piping system was originally built (i.e. ASME B31.3).
- Answers -construction code
Check valves in piping systems that have been identified as vital to process safety. -
Answers -critical check valves
Any type of deterioration encountered in the refining and chemical process industry that
can result in flaws/defects that can affect the integrity of piping (e.g. corrosion, cracking,
erosion, dents, and other mechanical, physical or chemical impacts). - Answers -
damage mechanism
Components of a piping system that normally have no significant flow. Some examples
include blanked branches, lines with normally closed block valves, lines with one end
blanked, pressurized dummy support legs, stagnant control valve bypass piping, spare
pump piping, level bridles, relief valve inlet and outlet header piping, pump trimbypass
lines, high-point vents, sample points, drains, bleeders, and instrument connections. -
Answers -deadlegs
An imperfection of a type or magnitude exceeding the acceptable criteria. - Answers -
Defect
The pressure at the most severe condition of coincident internal or external pressure
and temperature (minimum or maximum) expected during service. - Answers -design
pressure
The temperature at which, under the coincident pressure, the greatest thickness or
highest component rating is required. It is the same as the design temperature defined
in ASME B31.3 and other code sections and is subject to the same rules relating to
allowances for variations of pressure or temperature or both. - Answers -design
temperature of a piping system component
An area within a CML defined by a circle having a diameter not greater than 2 in. (50
mm) for a pipe diameter not exceeding 10 in. (250 mm), or not greater than 3 in. (75
mm) for larger lines and vessels. CMLs may contain multiple test points.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller GEEKA. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.39. You're not tied to anything after your purchase.
Can Stuvia be trusted?
4.6 stars on Google & Trustpilot (+1000 reviews)
75759 documents were sold in the last 30 days
Founded in 2010, the go-to place to buy study notes for 14 years now