LPI Level 1 Practice Test Questions And Answers Latest Updates
9 views 0 purchase
Course
LPI Level 1
Institution
LPI Level 1
When using a post-emulsification penetrant, it is necessary to apply the emulsifier: -
️️after the dwell time has elapsed
The term used to describe the action of a particular developer in soaking up the
penetrant in a discontinuity, so as to cause the maximum bleed-out of the liquid
penetra...
LPI Level 1 Practice Test
When using a post-emulsification penetrant, it is necessary to apply the emulsifier: -
✔️✔️after the dwell time has elapsed
The term used to describe the action of a particular developer in soaking up the
penetrant in a discontinuity, so as to cause the maximum bleed-out of the liquid
penetrant for increased contrast and sensitivity, is known as - ✔️✔️blotting
All of the following methods are commonly used to clean parts prior to penetrant testing
except - ✔️✔️power wire brushing
Which of the following is a commonly used classification for penetrant? - ✔️✔️post-
emulsifiable penetrant
A generally accepted method for removing excess nonwater-washable penetrant is -
✔️✔️wiping and cautiously cleaning the test specimen with a cleaner-dampened cloth
All of the following parts can be tested by the liquid penetrant method except - ✔️✔️a
part made from a porous plastic material
Which of the following discontinuities can be found by the penetrant test method? -
✔️✔️a surface crack
Which one of the following conditions will affect the rate and the extent a liquid
penetrant will enter cracks, fissures, and other small openings? - ✔️✔️the surface
condition of the specimen being tested
Which of the following is generally the more acceptable method for cleaning parts prior
to penetrant testing? - ✔️✔️vapor degreasing
Cutting oils may be effectively removed from parts before penetrant testing by -
✔️✔️vapor degreasing
The most common type of contaminant in fluorescent penetrant fluid is - ✔️✔️water
Black light, with a proper functioning filter in place, used for fluorescent penetrant
inspection can cause permanent damage to - ✔️✔️none of the above
, All of the following basic inspection principles apply to the penetrant methods except -
✔️✔️indications glow when illuminated with a black light
Subsurface discontinuities can be best detected by - ✔️✔️none of the above
Visible penetrant may be applied by - ✔️✔️brushing, spraying, and dipping
The first step in conducting a liquid penetrant test on a surface that has been painted is
to - ✔️✔️completely remove the paint
When conducting a water-washable liquid penetrant test, the wet developer is applied -
✔️✔️after the removal of the penetrant
Using a black light lamp with a cracked filter or without the filter in place can cause
damage to human eyes because the lamp emits - ✔️✔️ultraviolet light
The term used to define the period of time in which the test part is covered with
penetrant is - ✔️✔️penetration time (dwell time)
Usually, the most desirable method of removing excess water-washable penetrant after
the dwell time is by using - ✔️✔️a low pressure coarse water spray
When conducting a liquid penetrant test using a post-emulsifiable visible dye penetrant,
the generally accepted method for applying the wet developer is by - ✔️✔️spraying
Which of the following characteristics does not apply to liquid penetrant testing -
✔️✔️this method can accurately measure the depth of a crack or discontinuity
Which of the following discontinuities is most likely to be missed due to improper rinse
techniques? - ✔️✔️shallow and broad discontinuities
When conducting a fluorescent penetrant test, a commonly used technique for assuring
that the excess penetrant has been removed prior to the application of a developer is to
- ✔️✔️scan the surface with a black light
Which of the following surface conditions could have a detrimental effect on a liquid
penetrant test? - ✔️✔️a wet surface, a rough weld, and an oily surface
Liquid penetrant testing is capable of detecting - ✔️✔️discontinuities open to the
surface
Black light equipment is required when penetrant testing by - ✔️✔️the fluorescent
penetrant method
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller ACADEMICMATERIALS. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $7.99. You're not tied to anything after your purchase.
