CHST EXAM TEST BANK QUESTIONS WITH 100% CORRECT ANSWERS
9 views 0 purchase
Course
CHST
Institution
CHST
CHST EXAM TEST BANK QUESTIONS WITH 100% CORRECT ANSWERS
Which of the following types of construction equipment can NOT make inadvertent contact with overhead power lines? - Answer Bulldozers are generally not tall enough to hit overhead power lines.
29 CFR 1926.502, when a 200-pound load is a...
CHST EXAM TEST BANK QUESTIONS
WITH 100% CORRECT ANSWERS
Which of the following types of construction equipment can NOT make inadvertent
contact with overhead power lines? - Answer ✔ Bulldozers are generally not tall enough
to hit overhead power lines.
29 CFR 1926.502, when a 200-pound load is applied in a downward direction to the top
edge of a guardrail, it shall not deflect to a height any less than ________ above the
walking or working level. - Answer ✔ 39 inches
Which of the following is NOT a type of welding?
a. Modulus welding b. Resistance welding c. Arc welding d. Oxygen-fuel gas welding -
Answer ✔ Modulus Welding
common test used to check for cracks in a grinding wheel? - Answer ✔ The "ring test"
evaluates the sound coming from a grinding wheel when lightly tapped with a
nonmetallic material.
What is electrical "bonding" - Answer ✔ the connection of two or more conductive
objects with a conductor to prevent electrocution
29 CFR 1910.242, the compressed-air pressure limit for cleaning operations shall not
exceed ________ pounds per square inch. - Answer ✔ 30 psi
Anchor points for personal fall arrests should be capable of holding __________ pounds
per person - Answer ✔ 5000
Cranes and derricks must be clear of power lines by at least _____ feet for voltages up
to _____ kV - Answer ✔ 10 feet for voltages up to 50 kV and 10 feet plus 0.4 inch for
each kV over 50.
The ISO 14001 environmental management system is built upon which model? -
Answer ✔ plan-do-check-act model
Combustible liquids that are not stored within the confines of a "designated" outside
storage area must: - Answer ✔ completely surrounded by a curb structure or enclosure
that is at least six inches in height.
, Per OSHA's 29 CFR 1904.6 (Recordkeeping Standard), for how long must a document
such as the OSHA 300 Log be retained? - Answer ✔ five years following the end of the
calendar year that the records cover.
The OSHAS 18000 series of occupational health and safety management system
standards have the overarching goal of: - Answer ✔ proactively identify and respond to
risk before an accident or incident occurs.
A cut-off wheel that has a diameter in the range of 6-12 inches can cut a material with a
maximum thickness of: - Answer ✔ ¼ inch.
Per OSHA 29 CFR 1910.1025, the action level for lead (Pb) exposure is 30 micrograms
per cubic meter of air, averaged over an eight-hour period. What is the permissible
exposure limit? - Answer ✔ 50 micrograms per cubic meter of air, averaged over eight
hours
The construction health & safety technician can best identify potential workplace
hazards via: - Answer ✔ conduct of a rigorous worksite analysis
What type of OSHA violation can result in a fine of up to $250,000 if an employee death
occurs? - Answer ✔ Willful Violation
acceleration of gravity constant? - Answer ✔ 32.2 ft/sec 2
"floor-hole" is dimensionally defined as: - Answer ✔ a (measurable) hole with a range
between 1 and 12 inches.
ASTM D 120-09 requires that rubber-insulating gloves for use in live electrical work
exceeding ______ must be ______. - Answer ✔ 50 volts, type 1
NOT an example of "point-of-operation" guarding? - Answer ✔ Ring guards
At a construction worksite, what is NOT a system or device that is typically employed for
limiting falls? - Answer ✔ Pitons and safety cables
the use of fall-protection equipment must be used when a construction worker is at least
_______ above the ground. - Answer ✔ 6 ft
During a rigging inspection, if the thrat opening of a hook has increased in excess of
______ percent of the original throat opening, it should be replaced. - Answer ✔ 15
What is the definition of an "on-scene coordinator"? - Answer ✔ the individual who is in
charge of coordinating various agencies and departments to ensure that all needs are
responded to during and after an event.
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Scholarsstudyguide. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.59. You're not tied to anything after your purchase.
