FOA CFOT Certification Exam Questions Correct Answers Current Update (A Pass)
7 views 0 purchase
Course
FOA CFOT
Institution
FOA CFOT
FOA CFOT Certification Exam Questions Correct Answers Current Update (A Pass)
A fiber optic inspection microscope can increase the danger of high powered light sources by focusing the light coming out of a fiber into your eye. True or False? - Answers -True
A fiber optic power meter measures ...
FOA CFOT Certification Exam Questions
Correct Answers Current Update (A
Pass)
A fiber optic inspection microscope can increase the danger of high powered light
sources by focusing the light coming out of a fiber into your eye. True or False? -
Answers -True
A fiber optic power meter measures absolute power in dBM (dB referenced to 1 mw)
and, when used with a light source, can measure insertion loss expressed in dB. True
or False? - Answers -True
When we say 62.5/125 fiber, what does "62.5" mean? - Answers -core size, the
diameter in microns
When we say 50/125 fiber, what does "125" mean? - Answers -cladding size, the
diameter in microns
OM3 and OM4 multimode fiber with a 50/125 micron core are now a popular option in
premises cabling systems because they _____. - Answers -Are "laser optimized" which
gives more distance capability with gigabit networks using laser sources
In-multimode fiber, the attenuation (reduction in optical power) of the fiber is _____ at
850 nm than at 1300 nm. - Answers -Higher
Which of the following represents a singlemode (smaller core size) fiber size? - Answers
-9/125 micron
Singlemode fiber has _____ bandwidth than multimode fiber. - Answers -greater
Most plastic optical fibers are _____. - Answers -large core step-index
When you strip singlemode or graded index multimode mode glass fiber, you are
removing the ____. - Answers -Primary buffer coating
The proper method of pulling optical fiber cables is to attach the pull wire or tape to the
____ of the cable. - Answers -Strength members
According to the references, hybrid cables are cables that contain ____. - Answers -
Both singelmode and multimode optical fibers
What type of fiber cable design allows for large numbers of fibers with ultra-high density,
small size (diameter) and lower cost? - Answers -ribbon
, According to the references, composite cables refer to cables that contain ____> -
Answers -both optical fibers and copper conductors
Which optical fiber cables must be grounded? - Answers -all cables that contain metallic
elements
Fiber optic cable for use inside a building must _______. - Answers -Be rated to meet
the requirements of local building and fire codes
Optical fiber cable with a orange colored jacket generally indicates the cable contains
_____. - Answers -Multimode fiber
Premises cable jackets are usually color-coded in what color to indicate singlemode
fiber? - Answers -Yellow
Premises cable jackets are usually color-coded in what color to indicate laser-optimized
50/125 OM3 or OM4 fiber? - Answers -Aqua
When pulling long lengths of cable in conduit or innerduct, you may need to ____. -
Answers -Any or all of these as appropriate (Pull form the center to the ends, Use a
breakaway swivel or monitor tension, Lubricate the cable)
In a loose tube cable, a gel or absorbent tape or powder is normally used _____. -
Answers -To prevent water from entering the cable
Which type of cable is best suited for indoor installation when fibers ar to be directly
terminated inside a patch panel with adhesive/polish or prepolished splice connectors? -
Answers -tight buffer distribution cable
What type of cable may require installation of a breakout kit (also called a furcation or
fan out kit) for termination? - Answers -loose tube (loose buffer) cable
When pulling cables, the minimum bend radius under tension is generally specified as
______. - Answers -20 times the cable diameter
Cable ties used on fiber optic cables ____. - Answers -Can harm cables if too tight, so
they should be hand-tightened.
Fiber optic joints (connectors or splices) should have ____. - Answers -low loss, minimal
reflectance and high mechanical strength
To reduce _____ as well as loss, the end of a connector ferrule is polished to a PC
(physical contact) finish. - Answers -Reflectance
The benefits of buying summaries with Stuvia:
Guaranteed quality through customer reviews
Stuvia customers have reviewed more than 700,000 summaries. This how you know that you are buying the best documents.
Quick and easy check-out
You can quickly pay through credit card or Stuvia-credit for the summaries. There is no membership needed.
Focus on what matters
Your fellow students write the study notes themselves, which is why the documents are always reliable and up-to-date. This ensures you quickly get to the core!
Frequently asked questions
What do I get when I buy this document?
You get a PDF, available immediately after your purchase. The purchased document is accessible anytime, anywhere and indefinitely through your profile.
Satisfaction guarantee: how does it work?
Our satisfaction guarantee ensures that you always find a study document that suits you well. You fill out a form, and our customer service team takes care of the rest.
Who am I buying these notes from?
Stuvia is a marketplace, so you are not buying this document from us, but from seller Stuviaascorers. Stuvia facilitates payment to the seller.
Will I be stuck with a subscription?
No, you only buy these notes for $12.99. You're not tied to anything after your purchase.
